BGP/L3VPN Conformance and Performance ... - Syrus Systems
BGP/L3VPN Conformance and Performance ... - Syrus Systems
BGP/L3VPN Conformance and Performance ... - Syrus Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. Ingress/EgressForwarding<strong>Performance</strong> TestObjectiveDetermines the maximum rate at which aLabel Switched Router (LSR) configured asa L3 VPN Provider Edge (PE) node canstrip/pop or apply/push MPLS labels to<strong>and</strong> from incoming IP packets. Theresulting throughput of this operation isthen measured to the point of no loss.SetupThis test requires two ports; one tosimulate the PE router <strong>and</strong> another tosimulate the customer edge (CE) router.Ixia’s IxScriptMate application can be usedto execute this test.IP trafficMPLS trafficNW stubIXIACustomerEdge (CE)OSPFDUTProviderEdge (PE)OSPFLDPIXIAProviderCore (PC)IXIAProviderEdge (PE)MP-i<strong>BGP</strong> session overprovider backboneFigure 8. Ingress/egress forwarding performance test setup.Input parametersTable 3. Ingress/egress forwarding performance test input parameters.ParameterDescriptionOSPF Parameters Area ID <strong>and</strong> network type, Prefix/Mask information.<strong>BGP</strong> parameters AS number, Peer address, Prefix/Mask information.# Routes per CE Defined amount of routes for each CE to advertise.Traffic rateDesired rate to send traffic to be popped or pushed.<strong>BGP</strong>/<strong>L3VPN</strong> <strong>Conformance</strong> <strong>and</strong> <strong>Performance</strong> Testing: Sample Test Plans Copyright © Ixia, 2004 11