BGP/L3VPN Conformance and Performance ... - Syrus Systems

More documents

Recommendations

Info

Figure 7. Route reflector PE scalability test — frames received per emulated PE.10 Copyright © Ixia, 2004 BGP/L3VPN Conformance and Performance Testing: Sample Test Plans
3. Ingress/EgressForwardingPerformance TestObjectiveDetermines the maximum rate at which aLabel Switched Router (LSR) configured asa L3 VPN Provider Edge (PE) node canstrip/pop or apply/push MPLS labels toand from incoming IP packets. Theresulting throughput of this operation isthen measured to the point of no loss.SetupThis test requires two ports; one tosimulate the PE router and another tosimulate the customer edge (CE) router.Ixia’s IxScriptMate application can be usedto execute this test.IP trafficMPLS trafficNW stubIXIACustomerEdge (CE)OSPFDUTProviderEdge (PE)OSPFLDPIXIAProviderCore (PC)IXIAProviderEdge (PE)MP-iBGP session overprovider backboneFigure 8. Ingress/egress forwarding performance test setup.Input parametersTable 3. Ingress/egress forwarding performance test input parameters.ParameterDescriptionOSPF Parameters Area ID and network type, Prefix/Mask information.BGP parameters AS number, Peer address, Prefix/Mask information.# Routes per CE Defined amount of routes for each CE to advertise.Traffic rateDesired rate to send traffic to be popped or pushed.BGP/L3VPN Conformance and Performance Testing: Sample Test Plans Copyright © Ixia, 2004 11
Page 1: BGP/L3VPNConformance and Performanc
Page 4 and 5: Input parametersTable 1.VRF isolati
Page 6 and 7: Frames sent and received are evenly
Page 8 and 9: Figure 5. L3VPN configuration wizar
Page 12 and 13: Figure 9. IxScriptmate ingress/egre
Page 14 and 15: 4. VPN Merging Test ObjectiveThis t
Page 16: ResultsThe expected results of this

BGP/L3VPN Conformance and Performance ... - Syrus Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?