1. outline - toshiba tec europe
1. outline - toshiba tec europe 1. outline - toshiba tec europe
1. OUTLINE EO10-13009A1.3 OVERVIEW AND DIMENSIONS3 [USB interface connector]An interface cable which connects the printer to a POS terminal or Personal Computer isconnected to this connector, a USB I/F (V2.0 Full Speed) is needed for this connector.4 [Drawer interface Connector] [CDKO] (6 pin modular connector)A drawer cable which connects the printer to a drawer is connected to this connector. To thisconnector, a Toshiba drawer can be connected. Do not connect anything other than theconnectable drawer.5 [Parallel interface connector]An interface cable which connects the printer to a POS terminal or Personal Computer isconnected to this connector. A Parallel interface cable (Parallel I/F model) is needed for thisconnector.1.3.3 LED and Feed ButtonPOWER LED (Green)Lights when the power is turned on.ERROR LED (Blinking Green)The Error LED indicates an error byblinking.FEED ButtonUsed to feed receipt paper. A touchof this button causes one line feed.Pressing and holding it feeds thepaper continuously. When the powerswitch is turned on while the [FEED]button is pressed and held, theprinter will perform a self test print.1-4
1. OUTLINE EO10-13009A1.3 OVERVIEW AND DIMENSIONSError Status TableGreen LED Blinking (Slow)Problem What to Do Where to GoReceipt paper is low*There are about 4 ½ meters, ± 3 meters, (15 feet,± 10 feet) of paper left. Change the paper soon toavoid running out of paper part way through atransaction.Green LED Blinking (Fast)Problem What to Do Where to GoReceipt paper is outChange the paper now. Do not run a transactionwithout paper as the data may be lost.Receipt cover is openKnife failureClose the cover. The printer will not operate withthe cover open.Open the receipt cover and check the knife. Clearany jammed paper you can see. Tear off anyexcess paper against the tear-off blade.NOTE:If other LED status except for the above occurs, turn the power off, and then on. If this doesnot restore the LEDs, contact your nearest TOSHIBA TEC representative for assistance.1-5
- Page 1: TOSHIBA REMOTE RECEIPT PRINTERTRST-
- Page 4 and 5: 1. OUTLINE EO10-13009A(Revision Dat
- Page 8 and 9: 1. OUTLINE EO10-13009A1.3 OVERVIEW
- Page 11 and 12: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 13 and 14: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 15 and 16: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 17 and 18: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 19 and 20: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 21 and 22: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 23 and 24: 1. OUTLINE EO10-13009A(Revision Dat
- Page 25 and 26: 1. OUTLINE EO10-13009A1.8 DC POWER
- Page 27 and 28: 2. SUPPLY SPECIFICATIONS EO10-13009
- Page 29: 2. SUPPLY SPECIFICATIONS EO10-13009
<strong>1.</strong> OUTLINE EO10-13009A<strong>1.</strong>3 OVERVIEW AND DIMENSIONSError Status TableGreen LED Blinking (Slow)Problem What to Do Where to GoReceipt paper is low*There are about 4 ½ meters, ± 3 meters, (15 feet,± 10 feet) of paper left. Change the paper soon toavoid running out of paper part way through atransaction.Green LED Blinking (Fast)Problem What to Do Where to GoReceipt paper is outChange the paper now. Do not run a transactionwithout paper as the data may be lost.Receipt cover is openKnife failureClose the cover. The printer will not operate withthe cover open.Open the receipt cover and check the knife. Clearany jammed paper you can see. Tear off anyexcess paper against the tear-off blade.NOTE:If other LED status except for the above occurs, turn the power off, and then on. If this doesnot restore the LEDs, contact your nearest TOSHIBA TEC representative for assistance.1-5