1. outline - toshiba tec europe
1. outline - toshiba tec europe 1. outline - toshiba tec europe
1. OUTLINE EO10-13009A1.10 SENSORS1.10 SENSORSThermal HeadCutterCover Open SensorPaper RollPlatenCutter Home SensorP.E. SensorPaper Low Sensor1) Cover open sensorThis sensor performs synchronizing with the printer cover’s open/close at the paper rollreplacement, and adopts a mechanical switch. The thermal head is also opened/closed togetherwith the printer cover. When the printer cover is opened, the printer stops all performance.2) Paper End Sensor (P.E. Sensor)This sensor detects presence or absence of the paper just before the thermal head. If the thermalhead is charged without a paper roll, it may be damaged or the head life may be shorten. Thissensor prevents them.3) Paper Low SensorThis sensor detects that remaining paper is reduced. When remaining paper is reduced and theouter diameter becomes small, the sensor detects it.4) Cutter Home SensorThis sensor detects that cutter blade has returned to it’s “home” position. If the cover is openedbefore the cutter is in the home position, damage to the cutter blade will result. This sensor ensuresthat the cutter blade is always in the home position when not cutting.1-24
2. SUPPLY SPECIFICATIONS EO10-13009A2.1 EFFECTIVE PRINTING AREA2. SUPPLY SPECIFICATIONS2.1 EFFECTIVE PRINTING AREA80mm paperFront PageRear PageCPrintable AreaPrintable AreaDA = 4 mm +/-1 mmB = 4 mm +/-1 mmC = 17.5mm +/-1 mmE = 72mmF = Depend on print data conditionA=4mm+/- 1mmB=4mm+/- 1mmC=16.8 mm +/-1mmD=52.5mm +/-1mmE=72mmF= Depend on Print data condition( recommendation 2mm )(recommendation 2mm)FFA E BA E BThe above shows the printing area for the first transaction.Printable area for the second transaction onwards is as follows.Front PageRear Page17.5 mm Logo / Information print Logo / Information print 52.5mPrintable AreaPrintable Area2-1
- Page 1: TOSHIBA REMOTE RECEIPT PRINTERTRST-
- Page 4 and 5: 1. OUTLINE EO10-13009A(Revision Dat
- Page 6 and 7: 1. OUTLINE EO10-13009A1.3 OVERVIEW
- Page 8 and 9: 1. OUTLINE EO10-13009A1.3 OVERVIEW
- Page 11 and 12: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 13 and 14: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 15 and 16: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 17 and 18: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 19 and 20: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 21 and 22: 1. OUTLINE EO10-13009A1.6 ELECTRONI
- Page 23 and 24: 1. OUTLINE EO10-13009A(Revision Dat
- Page 25: 1. OUTLINE EO10-13009A1.8 DC POWER
- Page 29: 2. SUPPLY SPECIFICATIONS EO10-13009
<strong>1.</strong> OUTLINE EO10-13009A<strong>1.</strong>10 SENSORS<strong>1.</strong>10 SENSORSThermal HeadCutterCover Open SensorPaper RollPlatenCutter Home SensorP.E. SensorPaper Low Sensor1) Cover open sensorThis sensor performs synchronizing with the printer cover’s open/close at the paper rollreplacement, and adopts a mechanical switch. The thermal head is also opened/closed togetherwith the printer cover. When the printer cover is opened, the printer stops all performance.2) Paper End Sensor (P.E. Sensor)This sensor de<strong>tec</strong>ts presence or absence of the paper just before the thermal head. If the thermalhead is charged without a paper roll, it may be damaged or the head life may be shorten. Thissensor prevents them.3) Paper Low SensorThis sensor de<strong>tec</strong>ts that remaining paper is reduced. When remaining paper is reduced and theouter diameter becomes small, the sensor de<strong>tec</strong>ts it.4) Cutter Home SensorThis sensor de<strong>tec</strong>ts that cutter blade has returned to it’s “home” position. If the cover is openedbefore the cutter is in the home position, damage to the cutter blade will result. This sensor ensuresthat the cutter blade is always in the home position when not cutting.1-24