Axial Piston Variable Pump A7VO - Group VH A/S
Axial Piston Variable Pump A7VO - Group VH A/S
Axial Piston Variable Pump A7VO - Group VH A/S
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Blocked for new applications / Für Neuanwendung gesperrtRE 92 202/03.06 <strong>A7VO</strong> Bosch Rexroth AG 31/32Installation NotesGeneralDuring commissioning and operation, the axial piston unit must be filled with hydraulic fluid and air bled. This is also to be observedfollowing a relatively long standstill as the system may empty via the hydraulic lines.The leakage fluid chamber is internally connected to the suction chamber. A leakage fluid line to the tank is not required.Exception: Operation with pressure control or pressure cut-off.In all operating states, the suction line must flow into the tank below the minimum fluid level.The minimum suction pressure at port S must not fall below 0,8 bar absolute.Installation positionAs to the examples mentioned below. Further installation positions are possible upon consultation.Installation below the tank (standard)<strong>Pump</strong> below minimum fluid level in tank.Recommendation installation position: 1 and 2.1 2UR 1 R 2SSUR 2 R 1R 13 4SR 2UR 1UR 2SInstallationpositionAir bleedFilling1 R 1 S2 R 2 S3 R 1, R 2 S4 U S