Axial Piston Variable Pump A7VO - Group VH A/S

Blocked for new applications / Für Neuanwendung gesperrtRE 92 202/03.06 A7VO Bosch Rexroth AG 29/32Unit Dimensions, Size 160Shaft endsBefore finalizing your design, please requestapproved installation drawing. Dimensions in mm.Z Splined shaft DIN 5480W45x2x30x21x9g3612PParallel keyed shaftDIN 6885, AS14x9x703612ø70M16x2 1 ) 2 )48.5ø70850+0.018ø45 +0.002M16x2 1 ) 2 )90PortsA, B Service line ports (high pressure series) SAE J518 1 1/4 inFastening thread DIN 13 M14x1,5; 19 deep 2 )S Suction port (standard series) SAE J518 3 inFastening thread DIN 13 M16x1,5; 24 deep 2 )U Bearing flushing (plugged) DIN 3852 M22x1,5; 14 deep 210 Nm 2 )R Air bleed (plugged) DIN 3852 M26x1,5; 16 deep 230 Nm 2 )A 1 High pressure (plugged) DIN 3852 M16x1,5; 12 deep 100 Nm 2 )T 1 Pilot fluid drain (plugged, only DR, ..D.. open) DIN 3852 M12x1,5; 12 deep 50 Nm 2 )X 3 Override (plugged) DIN 3852 M16x1,5; 12 deep 100 Nm 2 )Y 3 External control pressure (plugged) DIN 3852 M14x1,5; 12 deep 80 Nm 2 )X 1 Pilot pressure DIN 3852 M14x1,5; 12 deep 80 Nm 2 )X 4 Load pressure DIN 3852 M14x1,5; 12 deep 80 Nm 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 32