Axial Piston Variable Pump A7VO - Group VH A/S

Blocked for new applications / Für Neuanwendung gesperrt26/32 Bosch Rexroth AG A7VO RE 92 202/03.06Unit Dimensions, Size 107Shaft endsBefore finalizing your design, please requestapproved installation drawing. Dimensions in mm.Z Splined shaft DIN 5480W40x2x30x18x9g289.5PParallel keyed shaftDIN 6885, AS12x8x63289.5M12x1.75 1 ) 2 )ø6043ø60845+0.018ø40 +0.002M12x1.75 1 ) 2 )80PortsA, B Service line ports (high pressure series) SAE J518 1 inFastening thread DIN 13 M12x1,75; 17 deep 2 )S Suction port (standard series) SAE J518 2 1/2 inFastening thread DIN 13 M12x1,75; 17 deep 2 )U Bearing flushing (plugged) DIN 3852 M18x1,5; 12 deep 140 Nm 2 )R Air bleed (plugged) DIN 3852 M18x1,5; 12 deep 140 Nm 2 )A 1 High pressure (plugged) DIN 3852 M16x1,5; 12 deep 100 Nm 2 )T 1 Pilot fluid drain (plugged, only DR, ..D.. open) DIN 3852 M12x1,5; 12 deep 50 Nm 2 )X 3 Override (plugged) DIN 3852 M16x1,5; 12 deep 100 Nm 2 )Y 3 External control pressure (plugged) DIN 3852 M14x1,5; 12 deep 80 Nm 2 )X 1 Pilot pressure DIN 3852 M14x1,5; 12 deep 80 Nm 2 )X 4 Load pressure DIN 3852 M14x1,5; 12 deep 80 Nm 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 32