Axial Piston Variable Pump A7VO - Group VH A/S

Blocked for new applications / Für Neuanwendung gesperrtRE 92 202/03.06 A7VO Bosch Rexroth AG 17/32Unit Dimensions, Size 28Shaft endsBefore finalizing your design, please requestapproved installation drawing. Dimensions in mm.Z Splined shaft DIN 5480W25x1,25x30x18x9g196PParallel keyed shaftDIN 6885, AS8x7x40196M8x1.25 1 ) 2 )ø354315ø25 +0.002+0.015M8x1.25 1 ) 2 )28ø3550PortsA, B Service line ports (high pressure series) SAE J518 3/4 infastening thread DIN 13 M10x1,5; 17 deep 2 )S Suction port (standard series) SAE J518 1 1/2 infastening thread DIN 13 M12x1,75; 20 deep 2 )U Bearing flushing (plugged) DIN 3852 M16x1,5; 12 deep 100 Nm 2 )R Air bleed (plugged) DIN 3852 M18x1,5; 12 deep 140 Nm 2 )A 1 High pressure (plugged) DIN 3852 M12x1,5; 12 deep 50 Nm 2 )T 1 Pilot fluid drain (plugged, only DR, ..D.. open) DIN 3852 M12x1,5; 12 deep 50 Nm 2 )X 3 Override (plugged) DIN 3852 M12x1,5; 12 deep 50 Nm 2 )Y 3 External control pressure (plugged) DIN 3852 M14x1,5; 12 deep 80 Nm 2 )X 1 Pilot pressure DIN 3852 M14x1,5; 12 deep 80 Nm 2 )1 ) centering bore according to DIN 332 (thread according to DIN 13)2 ) please observe the general notes for the max. tightening torques on page 32