Download manual

SYSTEMA S.p.A.8.2 Electrical connection of an appliance to a control panel series CE/AAIRTIGHT GAS-FIRED RADIANT TUBES INFRAFig.45 Electrical connection between seriesCE/A and INFRA appliance.2 3145230VATTENTION!!IN CASE OF BURNER WITH FC E32C DEVICE, THE ELECTRICBOARD MUST BE OF TYPE CE/A6798KEY1= Control board Baf burner2= Burner with appliance FC M32C/FC E32C3= Fan4= Fan power cable 3x1.5 mm25= Appliance power cable section 6x1.5 mm26= Globothermostat probe7= Probe connection cable section 2x1.5 mm2 (to be housed in aseparate channel from the power cables). For lengths of morethan 10 meters, the use of the shielded cable is recommended,taking care to connect the screen common clamp of theprobe input of the thermostat.8= Electric panel series CE/A (see fig. 46)9= Electric power supply, the line must be suitably protected with anautomatic switch with adequate capacityRev. 18GB061044