Rothenberger - Inolec
Rothenberger - Inolec
Rothenberger - Inolec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Expanding, Extracting,<br />
and Bending Tools<br />
Expanders 6, 7<br />
Tee Extractors 8<br />
Accessories for Tee Extractors 8<br />
Flaring Tools 9, 10<br />
Benders 11–13<br />
Power Benders 14<br />
When it comes to installation or repair of soft copper, hard copper, aluminum or PEX tubing,<br />
ROTHENBERGER has the solution.<br />
ROTHENBERGER hand and power tools are the perfect choice for the professional for fittingfree<br />
installation.<br />
1<br />
5
1<br />
Expanders<br />
ROCAM ® EXPANDER Power Torque<br />
From the pioneer of tube expansion technology and the leading<br />
manufacturer of expanders for more than 35 years, the ROCAM ®<br />
Expander is ideal for efficient, fitting-free tube installation in<br />
plumbing, heating, gas, refrigeration and climate control systems.<br />
The EPT ® -Technology offers the following advantages:<br />
l Concealed bent lever:<br />
- Protection against dirt<br />
- Protection against mechanical damage<br />
l Optimized force transmission:<br />
- Ergonomic<br />
- Better force flow in relation to the<br />
hand force of the user<br />
- Less effort required<br />
6<br />
l Steel adapter:<br />
Tough and wear-resistant<br />
l Automatic<br />
pin guide retraction:<br />
Faster operation<br />
l Fine adjustment screw:<br />
Exact adjustment of the<br />
capillary gap<br />
l High strength, forged aluminum body:<br />
Lower weight, easy handling<br />
11006<br />
The golden Titanium Nitride coating (TiN) on the<br />
pin guide is superior because of its:<br />
l High degree of hardness of 2300 HV:<br />
Protection against abrasive wear<br />
l Low friction factor:<br />
Reduces effort required<br />
l Chemical resistance:<br />
Good corrosion protection<br />
l Universal wear resistance layer:<br />
Long-lasting<br />
12000<br />
Product Profile<br />
FEATURES<br />
l Eliminates purchase and storage of fittings<br />
l 50% less labor costs<br />
l 50% less soldering saves materials<br />
l Converts scrap tubes into fittings, saves material costs<br />
l Increases safety by reducing number of soldered joints<br />
TECHNICAL DATA<br />
For expanding, reducing and calibrating tubes made out of:<br />
• soft and half-hard copper dia. 5/16” – 1-3/4” (8 – 42 mm)<br />
max. wall thickness 0.06”, (1.6 mm)<br />
• soft aluminum dia. 5/16” – 1-1/8” (8 – 28 mm)<br />
max. wall thickness 0.06”, (1.6 mm)<br />
l Longer lever arms:<br />
Reduces effort required and<br />
increases work space<br />
l Ergonomic handles:<br />
Non slip, no jamming fingers<br />
Includes: ROCAM ® EXPANDER Power Torque (12000) with riveted<br />
expander heads, internal and external deburrer (11006), steel case.<br />
Description Max. O.D. Max. lb No.<br />
ROCAM ® Expander tool only 1-3/4" 0.06" 3.8 12000<br />
ROCAM ® Expander Set<br />
3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8" 8.0 12318<br />
3/8", 1/2", 3/4", 1" 12323<br />
1/2", 5/8", 7/8", 1-1/8" 6.8 12324<br />
1/2", 5/8", 7/8" 12325<br />
Internal/External Deburring Tool 0.7 11006<br />
for tubes dia. 1/8” - 1-1/2”<br />
800.545.7698 www.rothenberger-usa.com
Standard Riveted Expander Heads<br />
ROTHENBERGER standard riveted expander heads fit<br />
similar expanders from other brands as well.<br />
Wall thickness max in. A<br />
O.D. Cu Al Fe Stainless in. lb No.<br />
5/16" 0.04 0.04 0.04 0.04 0.24 0.5 11008<br />
3/8" 0.04 0.04 0.04 0.04 0.29 0.5 11052<br />
1/2" 0.05 0.05 0.05 0.04 0.43 0.5 11053<br />
5/8" 0.05 0.05 0.05 0.04 0.55 0.5 11054<br />
3/4" 0.05 0.05 0.05 0.04 0.71 0.5 11055<br />
7/8" 0.05 0.05 0.05 0.04 0.71 0.5 11056<br />
1" 0.06 0.06 0.06 - 0.62 0.5 11057<br />
1-1/8" 0.065 0.065 0.065 - 0.70 0.9 11058<br />
1-3/8" 0.065 - - - 0.70 1.0 11035<br />
1-5/8" 0.065 - - - 0.70 1.1 11062<br />
GRADUATED EXPANDER A1<br />
For efficient, fitting-free tube installation in plumbing, heating,<br />
gas, refrigeration and climate control systems.<br />
Product Profile<br />
TECHNICAL DATA<br />
For expanding, reducing and calibrating tubes made out of:<br />
• soft copper, aluminum dia. 1-3/8” – 4-1/8” (35 – 108 mm)<br />
max. wall thickness 0.1” (2.5 mm)<br />
l Strong pin guide:<br />
Bearing the expander head<br />
segments completely allowing<br />
high loads<br />
EXPANDER A1<br />
Includes: Graduated expander with handle, without special ratchet<br />
handle<br />
O.D. lb No.<br />
1-3/8", 1-5/8", 2-1/8", 2-5/8", 3-1/8", 4-1/8" 9.3 11078<br />
Ratchet Handle 3.0 27181<br />
800.545.7698 www.rothenberger-usa.com<br />
l Hardened segments:<br />
Tough and long-lasting<br />
l 6 rivets and guide<br />
channels:<br />
Guarantees perfect<br />
centering and<br />
uniform capillary gap<br />
Diameter<br />
Fitting of tube ends<br />
l 6 sizes on one tool:<br />
Expanding without<br />
changing tools<br />
l Long lever arms:<br />
Reduces the effort required<br />
A<br />
in<br />
Expanders<br />
l Bevel at segment ends:<br />
Allows recalibration of unround<br />
tubes and fittings<br />
l Extra long<br />
segments:<br />
Ensures proper<br />
coupling dimensions<br />
l Smooth-running<br />
screw thread:<br />
Change heads<br />
quickly<br />
Also suitable for<br />
uneven tubes<br />
l Positive fine adjustment:<br />
Optimum adjustment of tube<br />
socket size and capillary gap<br />
11078<br />
l Trapezoid thread<br />
with selflubricating<br />
bronze socket:<br />
Optimized<br />
force<br />
transmission<br />
Ratchet Handle<br />
(27181)<br />
1<br />
7
1<br />
Tee Extractor<br />
Tee Extractor Set<br />
ROTHENBERGER's Tee Extractors are simple, fast and economical -<br />
create perfect tees in less than a minute!<br />
8<br />
l Special screw thread:<br />
Reduces effort required<br />
l UNIDRILL Automatic 42:<br />
Exact drilling<br />
21575<br />
l Extractor Cam<br />
Pincer:<br />
Limits<br />
insertion<br />
depth<br />
22080<br />
Tee Extractor Parts<br />
Key features<br />
22081<br />
l Dimple limits insertion depth:<br />
Optimum positioning<br />
l Professional Tee-extraction:<br />
Optimum capillary gaps<br />
Forged hooks, specially polished, tempered and burnished. Nickel-plated bells.<br />
Usage note for soft copper tubes,<br />
the use of an extractor support is<br />
recommended<br />
.100 max wall thickness<br />
l Uniform and proper material extraction without scratches or burrs<br />
l Professional tee-extraction with optimum capillary gap<br />
l Special hook design: Easy insertion into drilled hole<br />
l Double vee block: Accurate and firm positioning<br />
l Special trapezoid thread: Optimum force transmission<br />
Product Profile<br />
FEATURES<br />
l Extractions on installed tubes:<br />
Reduces installation time and materials<br />
l Producing branches on tubes:<br />
Reduces the use of T-pieces<br />
l Compact design:<br />
Suitable for making tees even in tight spaces<br />
TECHNICAL DATA<br />
For producing tees on tubes made of:<br />
• soft copper, hard copper and dia. 3/8 – 2-1/8" (10 – 54 mm)<br />
aluminum max. wall thickness .1" (2.5 mm)<br />
Set includes: Tee-extractor, special ratchet (22081), cam pincer<br />
(22080), UNIDRILL Automatic 42 (21575), and steel carrying case<br />
Description ratchet size lb No.<br />
Tee Extractor Set 8.3 22124<br />
1/2", 5/8", 7/8", 1-1/8"<br />
Extractor Ratchet, 3/8" - 1-3/4" 11mm 1.0 22081<br />
Extractor Ratchet, 2" - 4-1/4" 3/4" 2.5 27181<br />
UNIDRILL ® 42, 3/8" - 1-5/8" 11mm 1.0 21575<br />
Extractor Cam Pincer, 1/2"-1-1/2" 5.9" 0.4 22080<br />
Hook & Bell Hooks Only<br />
Drill dia. Tee Extractor Extractor<br />
O.D. in. mm Ratchet size lb No. O.D. lb Hook No.<br />
3/8" 0.04 6 11 mm 0.3 22060 3/8" 0.25 22260<br />
1/2" 0.04 7 11 mm 0.4 22061 1/2" 0.25 22261<br />
5/8" 0.04 8 11 mm 0.5 22016 5/8" 0.50 22216<br />
3/4" 0.08 10 11 mm 0.5 22062 3/4" 0.50 22263<br />
7/8" 0.08 12 11 mm 0.8 22063 7/8" 0.50 22264<br />
1" 0.10 14 11 mm 1.1 22064 1" 0.50 22265<br />
1-1/8" 0.10 15 11 mm 1.1 22065 1-1/8" 0.50 22266<br />
1-1/4" 0.10 19 11 mm 1.6 22066 1-1/4" 0.60 22267<br />
1-3/8" 0.10 22 11 mm 1.6 22035 1-3/8" 0.75 22235<br />
1-1/2" 0.10 22 11 mm 1.6 22038 1-1/2" 0.70 22268<br />
1-5/8" 0.10 26 11 mm 2.0 22068 1-5/8" 0.70 22270<br />
1-3/4" 0.10 26 11 mm 2.0 22069 1-3/4" 0.25 22244<br />
2" 0.10 30 3/4" 3.0 22050 2" 1.10 22246<br />
2-1/8" 0.10 30 3/4" 3.5 22054 2-1/8" 1.20 22254<br />
22124<br />
800.545.7698 www.rothenberger-usa.com
ROFLARE ®<br />
Compact Flaring Tool, foldable<br />
For producing precision 45° single flares on copper, brass,<br />
aluminum and precision steel tubes up to 0.04" (1 mm) in wall<br />
thickness. Ideal for mobile applications and for pipes in<br />
refrigeration and automotive (brakes) industries.<br />
Double and 180° flares are also possible with the ROFLARE ®<br />
double flare attachment.<br />
l Hardened and polished flare cone:<br />
High quality flare sealing surface<br />
l "Multiblock" multi-clamping calipers:<br />
Firm, quick, off-center clamping of the tube<br />
and automatic self-centering; tubes don’t slip<br />
180° adapter<br />
l Mold available in metric and English measurements:<br />
Double flare attachment with tube depth stop for clamping<br />
800.545.7698 www.rothenberger-usa.com<br />
ROFLARE ®<br />
l Special screw thread:<br />
Allows smooth, efficient<br />
deformation of material<br />
26036<br />
l Made from high quality steel:<br />
Long-lasting<br />
Includes: ROFLARE ® basic tool with multiblock<br />
Flaring Tools<br />
Description O.D. lb No.<br />
Single 6 - 8 - 10 - 12 - 14 - 16 mm 3.0 26038<br />
Double 6 - 8 - 10 - 12 - 15 - 16 mm 3.0 26022<br />
requires 26023 to create double flares<br />
Single 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" 3.0 26036<br />
37° Single 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" 3.0 26032<br />
Single/Double 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" 3.0 26033<br />
requires 26034 to create double flares<br />
ROFLARE ® / ROFORM ® Accessories<br />
Double flare attachment/180° Adapter fits in ROFLARE flaring tool as<br />
well as in ROFORM ® socket and flare tools.<br />
Description O.D. lb No.<br />
Double 1/16", 1/4", 5/16", 3/8", 1/2" 5.0 26034<br />
Adapter for 180° flares 5.0 26039<br />
ROFORM ® Set<br />
For producing precision 45° single flares and precision<br />
sockets on soft and hard tubes.<br />
Set includes: Basic tool, 45° cone, expander pin, internal and<br />
external deburrer dia. 1/8"– 1-1/2" in. (11006), ROTRAC ® Tube<br />
Cutter 28 dia. 1/8"– 1-1/8" in. (70010), plastic case.<br />
Description O.D. lb No.<br />
ROFORM ® Set 6 - 8 - 10 - 12 - 14 - 16 mm 5.0 26711<br />
ROFORM ® Set 6 - 8 - 10 - 12 - 15 - 16 mm 5.0 26710<br />
ROFORM ® Set 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" 5.0 26715<br />
Carry Case 26089P<br />
1<br />
9
1<br />
Flaring Tools<br />
Universal Flaring Tool<br />
For producing precision 45° single flares on copper tubes<br />
l Self-centering tube clamp for all diameters:<br />
Compact design<br />
l Hardened flare cone with special geometry:<br />
Controlled flaring without tearing, forming perfect surfaces<br />
Professional Flaring Tool<br />
For producing precision 45° single flares on copper tubes<br />
l Certified for R410A<br />
10<br />
rotating<br />
flare cone<br />
tube<br />
clamp<br />
O.D. lb. No.<br />
3/16"- 5/8" (4-16mm) 1.9 222601<br />
l Spring-loaded slide coupling:<br />
No reduction in wall thickness<br />
l Flare cone rotates off-center in needle bearings:<br />
Controlled expanding and shaping of tube<br />
end without tearing<br />
High quality flares<br />
Flare cone<br />
off-center<br />
Mold<br />
l Quick and easy adjustment:<br />
Clamp adjusts for all diameters<br />
l Self-centering mold:<br />
Highest flare precision<br />
222402<br />
222601<br />
Set includes flaring tool with mold, plastic case<br />
l Clutch mechanism to make perfect flares<br />
l Made from forged steel:<br />
Tough and long-lasting<br />
l Can be drill driven:<br />
Fast and consistent flares in<br />
high-volume environments<br />
l Ergonomic handle:<br />
Comfortable use<br />
O.D. lb. No.<br />
1/8", 1/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" 4.4 222402<br />
800.545.7698 www.rothenberger-usa.com
TUBE BENDER<br />
Compact and easy to use, this small tube bender works with only one hand.<br />
Product Profile<br />
FEATURES<br />
l Special adjustment for small pipe diameters:<br />
Use in refrigeration, air-conditioning, oil supply and automotive, as<br />
well as pneumatic or hydraulic systems<br />
l Mechanical ratchet feed:<br />
Rapid and precise bending<br />
l Toothed rack with bayonet catch:<br />
Bending formers are quick and easy to change<br />
l Pliers with bayonet catch:<br />
Faster change of bending formers l Mechanical ratchet feed:<br />
Rapid and exact bending<br />
l Open bending frame:<br />
Production of repeated alternate<br />
angled bends possible<br />
Set includes: Basic tool, bending formers, steel case<br />
24134<br />
Description O.D. lb No.<br />
TUBE BENDER Set for 7.8 24134<br />
1/4", 5/16", 3/8", 1/2"<br />
Ratcheting Handle Only 1.0 24130<br />
Bending Former 3/16" 1.0 24001<br />
Bending Former 1/4" 1.0 24002<br />
Bending Former 5/16" 1.0 24003<br />
Bending Former 3/8" 1.0 24006<br />
Bending Former 1/2" 1.0 24008<br />
800.545.7698 www.rothenberger-usa.com<br />
l Ergonomic design:<br />
One handed operation<br />
Back plates<br />
TECHNICAL DATA<br />
l Compact design:<br />
Exact bending even<br />
in restricted spaces<br />
Various bends possible<br />
Bending formers<br />
Benders<br />
One handed bender for exact bending up to 90°<br />
of tubes made of:<br />
• soft copper and aluminum dia. 3/16” – 1/2” (4.75 – 12 mm)<br />
11<br />
1
1<br />
Benders<br />
TUBE BENDER MAXI<br />
Universal application possibilities in plumbing and heating<br />
installations, refrigeration, climate control, floor heating, and<br />
hydraulic systems.<br />
Bending formers<br />
Basic tool and bending support<br />
12<br />
l One base fits all<br />
diameters:<br />
Quick operation<br />
l Open bending frame:<br />
Production of repeated alternate<br />
angled bends possible<br />
23022X<br />
23000<br />
23001<br />
l New larger frame for steady support<br />
(working bench):<br />
One hand operation<br />
l Compact design:<br />
Three tube sizes with tight bending radii<br />
l Minimum measurement and bending radius<br />
display on former:<br />
Exact bending possible<br />
l Pliers with bayonet catch:<br />
Bending formers easily<br />
changeable<br />
l New improved ergonomic design<br />
l Faster operation (diameter change)<br />
l One hand bending possible!!<br />
l High quality bending performance<br />
l 0º-90º bends<br />
l Graduated scale<br />
Product Profile<br />
FEATURES<br />
TECHNICAL DATA<br />
For exact bending up to 90° of tubes made of:<br />
• soft copper, aluminum dia. 3/8” – 7/8” (12 – 22 mm)<br />
soft steel, soft stainless steel,<br />
MLP<br />
l New monoblock handle in<br />
aluminum injection<br />
l Side lever:<br />
Quick release and reset of<br />
bending former<br />
Set includes: basic tool (23000), bending support (23001), bending formers,<br />
and steel case<br />
Description O.D. Radius Max. in. lb No.<br />
MAXI BENDER Set 8.5 23022X<br />
3/8", 1/2", 5/8", 3/4", 7/8"<br />
MAXI BENDER MSR Set 8.5 23064<br />
1/2", 3/4", 1", Viega FostaPex<br />
MAXI BENDER Tool Only 2.1 23000<br />
MAXI BENDER Support with R/L Formers 1.2 23001<br />
Formers for copper/aluminum: 3/8" 1.38" 0.04 0.2 23010<br />
1/2" 1.38" 0.04 0.2 23011<br />
5/8" 1.93" 0.04 0.3 23012<br />
3/4" 2.91" 0.04 0.3 23013<br />
7/8" 3.43" 0.04 0.4 23014<br />
25151<br />
MINIBEND<br />
For exact, two-handed bending up to 180° of tubes<br />
made of:<br />
l soft copper, brass, aluminum dia. 1/4", 5/16", 3/8"<br />
(6 mm, 8 mm, 10 mm)<br />
l Suitable for use in:<br />
Refrigeration, climate control, oil supply, automobile,<br />
hydraulic and air pressure systems.<br />
Description O.D. Bend Radius In. lb No.<br />
MINIBEND 1/4", 5/16", 3/8" (.98", .95", .91") 1.0 25151<br />
800.545.7698 www.rothenberger-usa.com
Standard Two Handed Bender<br />
For exact bending up to 180° of tubes made of<br />
l Soft copper and aluminum<br />
l Bending radius display of 0 - 180° on former: Exact bending<br />
l Clamp mechanism for tighter tube hold:<br />
For bending shorter tube pieces<br />
l Light construction: Fatigue-free hand operation<br />
25131<br />
TUBE BENDER PRO<br />
For bending 1/2" and 3/4" semi-hard and hard copper pipes<br />
l Cast iron body for extended life<br />
l Aluminum former for proper bends<br />
l Glass reinforced polyamide shoe<br />
l S.A.S. (self adjusting shoe). The adjustable former end ensures high pressure<br />
at the pipe-former contact area and correct guidance at tube entry section,<br />
contributing to perfect bends<br />
l Rubber grip for easy operation<br />
l Displayed in strap for hanging<br />
ROBEND ® H+W PLUS<br />
For bending semi hard & hard copper piping<br />
Various bends possible<br />
Vice bending<br />
90614<br />
R<br />
Description Max. in. Radius in. lb No.<br />
ROBEND ® H+W PLUS Set, 0.04 30.3 24504<br />
1/2", 5/8", 7/8"<br />
ROBEND ® H+W PLUS, 3/8" 0.04 1.26 (32mm) 2.6 24551<br />
ROBEND ® H+W PLUS, 1/2" 0.04 1.50 (38mm) 2.5 24552<br />
ROBEND ® H+W PLUS, 5/8" 0.04 2.52 (64mm) 5.8 24516<br />
ROBEND ® H+W PLUS, 3/4" 0.04 3.19 (81mm) 8.5 24519<br />
ROBEND ® H+W PLUS, 7/8" 0.04 3.19 (81mm) 8.4 24522<br />
Bending Spray, 5.3 oz. (150 ml) 0.5 25120<br />
800.545.7698 www.rothenberger-usa.com<br />
l Fork and former made<br />
of high quality forged<br />
aluminum:<br />
Retains shape and<br />
is stable<br />
Standard Tube Benders<br />
R L<br />
O.D. Radius in. lb No.<br />
5/16" 0.95 (24mm) 12.0" 1.5 25131<br />
5/8" 2.28 (58mm) 17.7" 4.0 25136<br />
MULTIBENDER<br />
Universal hand bender provides bending of 1/2", 5/8", 3/4", and<br />
7/8" O.D. with 1 tool. Ideal for soft copper and aluminum.<br />
Description O.D. lb No.<br />
MULTIBENDER 1/2", 5/8", 3/4", 7/8" 8.7 90614<br />
Description O.D. lb No.<br />
Tube Bender PRO 1/2" 6.0 25913<br />
Tube Bender PRO 3/4" 6.0 25914<br />
l Patented ROLUB ANTI-STICK SYSTEM:<br />
42% less effort due to lower friction and<br />
optimum distribution of the bending<br />
spray<br />
l Reserve length table and<br />
bend radius scale on<br />
every former:<br />
Exact bending<br />
24504<br />
l Optimum combination of<br />
ROLUB guide shoe and<br />
bending former:<br />
Reduced effort bending<br />
without deformation<br />
and wrinkles<br />
l Bending former with<br />
base plate:<br />
To be clamped on<br />
the vice for easy<br />
bending<br />
l Base plate can be<br />
attached with<br />
additional handle:<br />
For free-hand<br />
bending up to<br />
dia. 5/8" (18<br />
mm)<br />
Set includes: benders corresponding to the<br />
various tube dimensions, bending spray 150 ml<br />
(25120), steel case<br />
13<br />
1
1<br />
Power Benders<br />
ROBEND ® 3000<br />
Tough, portable power bender<br />
Universal applications in plumbing, heating, refrigeration, climate<br />
control, and industrial systems.<br />
14<br />
Product Profile<br />
l Eliminates purchase and storage of fittings:<br />
Easy work preparation<br />
l Less joints:<br />
For increased safety<br />
FEATURES<br />
l Production of repeated alternate angled bends<br />
l Bending former made of high quality forged aluminum<br />
l Patented ROLUB system:<br />
Reduces friction for faster, smoother bending<br />
TECHNICAL DATA<br />
Cold bending up to 180°, manually or automatically,<br />
of tubes made of:<br />
• soft, semi-hard, hard copper,<br />
DIN EN 1057 dia. 1/2"–1-1/8" (12 mm–28 mm)<br />
• coated copper, precision steel dia. 1/2"–1-1/8" (12 mm–28 mm)<br />
• soft, half-hard, hard precision steel,<br />
DIN 2391/2393/2394 dia. 1/2"–1-1/8" (12 mm–28 mm)<br />
• threaded steel, DIN 2440/2441 dia. 1/2"–1-1/8" (12 mm–28 mm)<br />
• seamless stainless steel GW 541, wall thickness<br />
0.04" – 0.05"/1.0mm – 1.2mm dia. 1/2"– 1-1/8" (12 mm–28 mm)<br />
• coated steel tubes MPS-H heating type,<br />
DIN EN 2394 dia. 1/2"–1-1/8" (14 mm–30 mm)<br />
Set includes Basic ROBEND ® unit, guide shoe axle (25743), bending<br />
formers and guide shoes for corresponding tube diameters, adapter<br />
for tri-pod base, plastic case<br />
l Forged aluminum former with<br />
bending radius scale:<br />
High quality and robust<br />
l Automatically shuts off when preset<br />
bending angle is obtained:<br />
Fast batch production possible<br />
Wall thickness Bending radius<br />
Description in. in. lb No. Guide Shoe No.<br />
ROBEND ® 3000 Set 30.0 25001<br />
1/2", 5/8", 3/4", 7/8", 1", 1-1/8"<br />
Bending Formers set for copper tube (includes former and shoe):<br />
O.D. 1/2" 0.05 1.77 (45mm) 5.0 25652 ROLUB guide shoe 7620515<br />
O.D. 5/8" 0.05 2.20 (56mm) 5.0 25616 ROLUB guide shoe 7620517<br />
O.D. 3/4" 0.05 3.15 (80mm) 5.0 25619 ROLUB guide shoe 7620520<br />
O.D. 7/8" 0.05 3.46 (88mm) 6.0 25622 ROLUB guide shoe 7620521<br />
O.D. 1" 0.06 4.41 (112mm) 5.0 25625 ROLUB guide shoe 7620522<br />
O.D. 1-1/8" 0.06 4.41 (112mm) 6.0 25626 ROLUB guide shoe 7620523<br />
Bending spray 5.3 oz. (150ml) 0.5 25120<br />
Tripod 16.5 58182<br />
25001<br />
l Special ROLUB guide shoe:<br />
Bending without<br />
deformation and wrinkles<br />
due to less friction<br />
l Powerful 1010 W<br />
motor:<br />
Ideal for use on<br />
construction sites<br />
Easy presetting of bending angle<br />
without use of tool<br />
800.545.7698 www.rothenberger-usa.com
Press Tools<br />
ROPRESS COMPACT 16<br />
ROPRESS CORDLESS 17<br />
ROPRESS CORDED 18<br />
PRESS TOOL JAWS & ACCESSORIES 19<br />
PEX CRIMP TOOLS 20<br />
For leak-proof connections ROTHENBERGER offers their line of press tools and press jaws for<br />
copper and PEX pipe. In either cordless or corded models, ROMAX Press Tools, with their<br />
balanced design, are easier, faster and safer than soldering!<br />
15<br />
2
2<br />
Press Tools<br />
ROPRESS Compact<br />
6-Ton Battery-powered crimping tool<br />
The ROPRESS Compact lightweight, battery-powered press tool<br />
weighs only 5.4 lbs. and connects 1/2", 3/4" and 1" copper tubing or<br />
3/8"–1-1/4" PEX tubing in about 6 seconds. A slim profile allows for<br />
one hand operation of the tool while the other hand is free to hold<br />
and position the fitting. Its straight design is like an extension of your<br />
arm that easily reaches into tight spaces. When a press is complete,<br />
the jaws automatically release signaling that the tool is ready for the<br />
next press.<br />
16<br />
l Lightweight & compact:<br />
Straight design provides easy<br />
access in hard-to-reach areas<br />
l Tool uses<br />
bio-degradable oil:<br />
More “Green”<br />
l Battery & crimping force<br />
LED monitor:<br />
Displays battery<br />
charge and tool<br />
maintenance status.<br />
l Illuminates for safety when<br />
working in dark areas:<br />
LED work light<br />
l High-quality, powerful, long<br />
lasting 18V Makita Li-Ion battery:<br />
Long battery life<br />
l Over-molded tacky grip<br />
areas make gripping tool<br />
easier and more<br />
comfortable:<br />
Easy 1-hand operation<br />
l Easy access in hard-to-reach areas.<br />
Ergonomic design makes for<br />
effortless crimping:<br />
Lightweight & compact<br />
l One trigger controls<br />
all tool functions:<br />
Push-button<br />
Why Lithium-Ion Batteries?<br />
• Weigh 40% less than NiMNH or NiCd batteries<br />
• Last 70% longer than NiMH or NiCd batteries<br />
• No memory effect<br />
• Smart chargers control the charging current,<br />
voltage and battery temperature to maximize<br />
battery life<br />
• No hazardous materials<br />
l Twist 'n release locking pin<br />
for quick exchange of<br />
crimping jaws:<br />
Flexible and cost-effective<br />
l Jaw fixture rotates 350°:<br />
Easily fits into tight spaces<br />
Product Profile<br />
TECHNICAL DATA<br />
• Crimp Force: 12,000 lbs. (53 kn)<br />
• Length: 15-3/4" (438 mm)<br />
• Width: 2-7/8" (73 mm)<br />
• Weight: 6-1/2 lbs (3 kg)<br />
• Battery: 18V 3.0 Ah Li-ion<br />
• Crimp Cycle Time: Approx. 6 seconds<br />
• Battery Charge Time: 15 minutes<br />
Description lb No.<br />
ROPRESS Compact Press Tool, No Jaws 3.7 16001<br />
ROPRESS Compact Press Tool, 1/2"-1" 16.0 16002<br />
jaws, Battery, charger<br />
ROPRESS Compact Press Jaw, 1/2" copper 4.4 15031V<br />
ROPRESS Compact Press Jaw, 3/4" copper 4.4 15032V<br />
ROPRESS Compact Press Jaw, 1" copper 4.4 15033V<br />
ROPRESS Compact Press Jaw, 3/8" PEX 4.4 15930<br />
ROPRESS Compact Press Jaw, 1/2" PEX 4.4 15931<br />
ROPRESS Compact Press Jaw, 5/8" PEX 4.4 15932<br />
ROPRESS Compact Press, Jaw, 3/4" PEX 4.4 15933<br />
ROPRESS Compact Press Jaw, 1" PEX 4.4 15934<br />
ROPRESS Compact Press Jaw, 1-1/4" PEX 5.4 15935<br />
18V Lithium Battery, 3 amp 52176<br />
18V Lithium Battery, 1.5 amp 52177<br />
18V Lithium Battery Charger, 120V 52178<br />
GO/NO GO Calibration Gauge 1.0 14486<br />
3/8", 1/2", 5/8", 3/4" ASTM F1807 PEX<br />
GO/NO GO Calibration Gauge 1.0 14487<br />
3/8", 1/2", 3/4", 1" ASTM F1807 PEX<br />
800.545.7698 www.rothenberger-usa.com
ROPRESS Cordless<br />
State-of-the-art, battery-operated crimping tool.<br />
The ROPRESS Cordless combines the simplicity of joining copper pipes<br />
without soldering and brazing yet with the ease, features and<br />
portability of battery power.<br />
l Interchangeable crimping<br />
jaws:<br />
Flexible and cost-effective<br />
l Secure grips and<br />
innovative 2-component<br />
housing:<br />
Easy 1-hand operation<br />
l High-quality, powerful, long<br />
lasting Makita Li-Ion battery:<br />
Long battery life<br />
Why Lithium-Ion Batteries?<br />
• Weigh 40% less than NiMNH or NiCd batteries<br />
• Last 70% longer than NiMH or NiCd batteries<br />
• No memory effect<br />
• Smart chargers control the charging current,<br />
voltage and battery temperature to maximize<br />
battery life<br />
• No hazardous materials<br />
800.545.7698 www.rothenberger-usa.com<br />
l Illumination for safety when<br />
working:<br />
Light<br />
Product Profile<br />
TECHNICAL DATA<br />
Press Tools<br />
• Crimp Force: 24,000 lbs. (106 kn)<br />
• Length: 16-1/2" (420 mm)<br />
• Width: 2-7/8” (73 mm)<br />
• Weight: 15 lbs (6.8 kg)<br />
• Battery: 18V 3.0 Ah Li-ion<br />
l Effortless crimping:<br />
Lightweight pistol design<br />
l Shows tool information:<br />
LED display<br />
Description lb No.<br />
ROPRESS Cordless Tool, No Jaws 18.8 16101<br />
ROPRESS Cordless Tool, 1/2"-2" 22.8 16102<br />
jaws, Battery, charger<br />
ROPRESS Press Jaw, 1/2" copper 4.4 15222X<br />
ROPRESS Press Jaw, 3/4" copper 4.4 15223X<br />
ROPRESS Press Jaw, 1" copper 4.4 15224X<br />
ROPRESS Press Jaw, 1-1/4" copper 4.4 15225X<br />
ROPRESS Press Jaw, 1-1/2" copper 4.4 15226X<br />
ROPRESS Press Jaw, 2" copper 4.4 15227X<br />
ROPRESS Press Jaw, 3/8" PEX 4.4 15251X<br />
ROPRESS Press Jaw, 1/2" PEX 4.4 15252X<br />
ROPRESS Press Jaw, 5/8" PEX 4.4 15253X<br />
ROPRESS Press, Jaw, 3/4" PEX 4.4 15254X<br />
ROPRESS Press Jaw, 1" PEX 4.4 15255X<br />
ROPRESS Press Jaw, 1-1/4" PEX 5.4 15256X<br />
18V Lithium Battery, 3 amp 52176<br />
18V Lithium Battery, 1.5 amp 52177<br />
18V Lithium Battery Charger, 120V 52178<br />
GO/NO GO Calibration Gauge 1.0 14486<br />
3/8", 1/2", 5/8", 3/4" ASTM F1807 PEX<br />
GO/NO GO Calibration Gauge 1.0 14487<br />
3/8", 1/2", 3/4", 1" ASTM F1807 PEX<br />
17<br />
2
2<br />
Press Tools<br />
ROPRESS Corded<br />
State-of-the-art crimping tool.<br />
18<br />
l Interchangeable crimping<br />
jaws:<br />
Flexible and cost-effective<br />
l Secure grips and<br />
innovative 2-component<br />
housing:<br />
Easy 1-hand operation<br />
Product Profile<br />
TECHNICAL DATA<br />
• Crimp Force: 24,000 lbs. (106 kn)<br />
• Length: 16-1/2" (420 mm)<br />
• Width: 2-7/8" (73 mm)<br />
• Weight: 15 lbs (6.8 kg)<br />
l Effortless crimping:<br />
Lightweight pistol design<br />
Description lb No.<br />
ROPRESS Corded Tool, No Jaws 16.6 16201<br />
ROPRESS Corded Tool, 1/2"-2" jaws 20.6 16202<br />
ROPRESS Press Jaw, 1/2" copper 4.4 15222X<br />
ROPRESS Press Jaw, 3/4" copper 4.4 15223X<br />
ROPRESS Press Jaw, 1" copper 4.4 15224X<br />
ROPRESS Press Jaw, 1-1/4" copper 4.4 15225X<br />
ROPRESS Press Jaw, 1-1/2" copper 4.4 15226X<br />
ROPRESS Press Jaw, 2" copper 4.4 15227X<br />
ROPRESS Press Jaw, 3/8" PEX 4.4 15251X<br />
ROPRESS Press Jaw, 1/2" PEX 4.4 15252X<br />
ROPRESS Press Jaw, 5/8" PEX 4.4 15253X<br />
ROPRESS Press, Jaw, 3/4" PEX 4.4 15254X<br />
ROPRESS Press Jaw, 1" PEX 4.4 15255X<br />
ROPRESS Press Jaw, 1-1/4" PEX 5.4 15256X<br />
GO/NO GO Calibration Gauge 1.0 14486<br />
3/8", 1/2", 5/8", 3/4" ASTM F1807 PEX<br />
GO/NO GO Calibration Gauge 1.0 14487<br />
3/8", 1/2", 3/4", 1" ASTM F1807 PEX<br />
800.545.7698 www.rothenberger-usa.com
ROTHENBERGER Press Jaws<br />
800.545.7698 www.rothenberger-usa.com<br />
Press Tools<br />
Press jaws are subject to wear like all tools. In order to ensure proper functionality of the jaws, we recommend regular maintenance at the time of annual<br />
press tool inspection, or every 10,000 crimps.<br />
ROTHENBERGER press clamps are suitable for all press tools with a compatible press jaw fixture and a constant axial shearing force of 32 to 34 kN.<br />
NOTE: All press jaws should be examined periodically for damage. If damage is evident, the press jaw should not be used until it can be sent to your<br />
nearest authorized press tool service center for inspection and any necessary repairs.<br />
l Made from high-strength,<br />
hardened steel:<br />
Suitable for all press tools<br />
with constant axial shearing<br />
force of 32 - 34 kN<br />
l Batch numbering<br />
and individual<br />
testing:<br />
High quality<br />
standards for<br />
material and<br />
press profile<br />
15031<br />
ROTHENBERGER Press Rings<br />
l Universal acceptance:<br />
For all press tools with<br />
compatible press clamp<br />
fixture<br />
l Long-term corrosion<br />
protection:<br />
Ideal for use on<br />
construction sites<br />
ROTHENBERGER Press Rings with proven material and manufacturing quality. Suitable<br />
for confined spaces through the catch adjustment.<br />
Description lb No.<br />
Press Ring Set (2-1/2", 3", 4" rings),<br />
actuator, case 28.0 93667<br />
Press Ring XL 2-1/2" 6.0 93677<br />
Press Ring XL 3" 7.0 93682<br />
Press Ring XL 4" 7.0 93687<br />
Press Ring Actuator 5.0 93692<br />
Description lb No.<br />
ROPRESS Press Jaw, 1/2" copper 4.4 15222X<br />
ROPRESS Press Jaw, 3/4" copper 4.4 15223X<br />
ROPRESS Press Jaw, 1" copper 4.4 15224X<br />
ROPRESS Press Jaw, 1-1/4" copper 4.4 15225X<br />
ROPRESS Press Jaw, 1-1/2" copper 4.4 15226X<br />
ROPRESS Press Jaw, 2" copper 4.4 15227X<br />
ROPRESS Press Jaw, 3/8" PEX 4.4 15251X<br />
ROPRESS Press Jaw, 1/2" PEX 4.4 15252X<br />
ROPRESS Press Jaw, 5/8" PEX 4.4 15253X<br />
ROPRESS Press, Jaw, 3/4" PEX 4.4 15254X<br />
ROPRESS Press Jaw, 1" PEX 4.4 15255X<br />
ROPRESS Press Jaw, 1-1/4" PEX 5.4 15256X<br />
18V Lithium Battery, 3 amp 52176<br />
18V Lithium Battery, 1.5 amp 52177<br />
18V Lithium Battery Charger, 120V 52178<br />
GO/NO-GO Calibration Gauge 1.0 14486<br />
3/8", 1/2", 5/8", 3/4" ASTM F1807 PEX<br />
GO/NO-GO Calibration Gauge 1.0 14487<br />
3/8", 1/2", 3/4", 1" ASTM F1807 PEX<br />
19<br />
2
2<br />
PEX Crimp Tools<br />
PEX Hand Crimper<br />
Constructed of hardened steel for durability with an Ultra-Lite fiberglass<br />
reinforced composite handle, <strong>Rothenberger</strong> Pex Crimpers are ideal for making<br />
copper crimp ring connections in potable water and radiant heating applications.<br />
• Crimps meet ASTM F1807 Specificiations<br />
• Each tool is supplied with a go/no-go gauge<br />
• Crimp Cavity does not skive the copper ring or cause it to fishtail during<br />
crimping process<br />
• Glass-filled composite handles reduce fatigue especially when working<br />
overhead<br />
• Properly maintained crimpers are expected to make over 100,000 crimps in<br />
their life cycle<br />
• Minimal Calibration Adjustments<br />
• Tool length is 12"<br />
20<br />
Go/No-Go Gauge<br />
PEX Medium Handle Crimper<br />
Time-tested by the professional plumbing contractor, this medium handle crimper<br />
is considered the standard of the industry. Its crimp eliminates the unsightly<br />
appearance of tool marks and distortion of crimped rings. Effortless crimping<br />
action as loads are dramatically reduced with this innovative design. The longer<br />
length on this tool promotes productivity and minimizes user fatigue.<br />
• Crimps meet ASTM F1807 Specificiations<br />
• Tool length is 16"<br />
Ring Removal Tool<br />
Mechanically designed to efficiently recover fittings without damanging the<br />
fitting sealing surface.<br />
• Suitable for use on 1/2", 5/8", 3/4" and 1" Pex Pipe Sizes<br />
• Cutting blade only pentrates the ring and Pex pipe. No fitting damage is<br />
possible with this tool.<br />
• Two cuts on the ring allow the user to reclaim the fitting.<br />
• Cushioned grips create comfort.<br />
• Replacement blades readily available.<br />
Clamp Pincer Ratchet Tools<br />
Mechanically designed to assure consistent crimps to meet ASTM F2098<br />
specifications, offering compact design, light weight frame, make this tool ideal<br />
for all situations.<br />
• Only one tool is required for 3/8", 1/2", 3/4" or 1" Clamps<br />
• Ratchet mechanism assures complete crimps<br />
• A tool calibration gage is provided to verify the tool is in adjustment<br />
• Made in the USA from heat treated steel which provides durability and<br />
longevity.<br />
• Tool length is 11"<br />
See our other PEX Tools on page 48!<br />
Description lb No.<br />
1/2" PEX Crimper 4.0 12425<br />
3/4" PEX Crimper 4.0 12426<br />
1" PEX Crimper 4.0 12427<br />
1/2" & 3/4" PEX Crimper Combo 3.3 12428<br />
Go/No-Go Gauge, for 3/8", 1/2", 5/8", 3/4" crimps 1.0 14486<br />
Go/No-Go Gauge, for 3/8", 1/2", 3/4", 1" crimps 1.0 14487<br />
Description lb No.<br />
1" PEX Crimper, 16" handle 4.0 12431<br />
Description lb No.<br />
PEX Ring Removal Tool 1.3 12430<br />
Description lb No.<br />
PEX Stainless Clamp Pincer Ratchet Tool 1.0 12429<br />
800.545.7698 www.rothenberger-usa.com
Steel Pipe Equipment<br />
Hand Threaders 22<br />
Portable Power Threaders 23, 24<br />
Power Drives 25<br />
Compact Threading Machines 26, 27<br />
COLLINS ® High Performance Threading Machines 28 – 30<br />
Threading Accessories 31, 32<br />
Roll Grooving 31<br />
Vises and Stands 33<br />
Machine Die Heads and Dies 34 – 38<br />
Production Cutting Machines 39<br />
Whether on-site or in the shop, ROTHENBERGER machines make cutting, threading, and<br />
grooving in the gas, plumbing, and heating industries a snap! Cutting and threading up<br />
to 6" diameter steel pipe is no problem.<br />
No matter the application or size of the job, ROTHENBERGER has the right machine!<br />
3<br />
21<br />
21
3<br />
Hand Threaders<br />
SUPER CUT<br />
Ratchet Threader<br />
22<br />
Quick Change Die Heads<br />
l Positive octagonal universal drive:<br />
Secure hold<br />
l Long pipe guide<br />
Perfect centering<br />
Precision Dies<br />
For precision die heads<br />
and dies, see page 34<br />
l High-quality tempered steel:<br />
Extremely long life<br />
l Optimized cutting geometry:<br />
Easy to start cut, excellent chip discharge<br />
1-1/2" 2" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"<br />
SUPER CUT Deluxe Threading Kit<br />
70614<br />
Set includes ratchet handle, die heads, plastic case<br />
70905X<br />
Description lb No.<br />
SUPER CUT Set 1/2", 3/4", 1" NPT 9.3 70903X<br />
SUPER CUT Set 1/2", 3/4", 1", 1-1/4" NPT 15.0 70901X<br />
SUPER CUT Set 1/2", 3/4", 1", 1-1/4", 20.0 70905X<br />
1-1/2", 2" NPT<br />
SUPER CUT Set 1/2", 3/4", 1", 1-1/4", 20.0 P70905C<br />
1-1/2", 2" NPT for plastic-coated pipe<br />
Ratchet handle No. 1 1/4" - 1-1/4" 4.0 70840X<br />
Ratchet handle No. 2 1-1/2" - 2" 4.0 71272<br />
Die Head Adapter for die 2.0 71273<br />
heads up to 1-1/4"<br />
RONOL ® Cutting Fluid, 6.7 oz (200 ml) 0.8 65018<br />
Bucket Oiler 20.0 70753<br />
70753<br />
Product Profile<br />
l Convenient, lockable ratchet direction reversal<br />
l Secure hold with locking retainer:<br />
Simple insertion and removal of die heads<br />
l Slim, compact shape with excellent overall size; angle requirements of 22.5°:<br />
For difficult to reach positions<br />
l Offset lever:<br />
High leverage<br />
FEATURES<br />
l Fits all ROTHENBERGER hand and electric threaders<br />
TECHNICAL DATA<br />
Precision thread cutting to approved standards<br />
• NPT dia. 1/4" – 2"<br />
Kit includes SUPER CUT 1-1/4" Ratchet (70840X),<br />
Quick Change die heads NPT (1/2" 70912X, 3/4" 70913X,<br />
1" 70914X), SUPER 1-1/4" Steel pipe cutter (70040),<br />
Water Pump pliers 10" (70522), 14" Heavy Duty Pipe Wrench<br />
(70153), pipe tape , plastic case<br />
70753<br />
Description lb No.<br />
SUPER CUT Deluxe Threading Kit 21.0 70614<br />
Bucket Oiler 20.0 70753<br />
800.545.7698 www.rothenberger-usa.com
SUPERTRONIC 1250<br />
Portable Compact Threader<br />
Lightweight yet durable, this portable power threader quickly produces 1/2", 3/4", 1"or 1-1/4" threads.<br />
l Small head and die:<br />
Ideal for narrow spaces<br />
l Direct seating with locking of tension ring:<br />
Die heads are held firmly in place<br />
Product Profile<br />
l Fast and steady production FEATURES threading up to 1"<br />
l Fast and steady production threading up to 1-1/4"<br />
l Electronic push-button forward/reverse control<br />
l Compact dimensions<br />
l Small head<br />
l Lightweight, easy to handle<br />
l Durable<br />
l Fiberglass-reinforced aluminum motor housing<br />
TECHNICAL DATA<br />
l Cutting head and motor are one unit:<br />
Compact size<br />
• NPT Diameter: 1/2", 3/4", 1", 1-1/4"<br />
• Motor: 34 rpm, 5 axle<br />
800.545.7698 www.rothenberger-usa.com<br />
Portable Power Threaders<br />
The 1250 features a durable helicoidal power transmission, electric reverse, and light yet strong aluminum and fiberglass body.<br />
Ideal for repair and maintenance of gas lines and boilers.<br />
For precision die heads<br />
and dies, see page 34<br />
l Ergonomic handle grip:<br />
Easy to hold<br />
70753<br />
l Strong, fiberglass-reinforced<br />
aluminum housing:<br />
Sturdy and lightweight<br />
71279<br />
Standard supply: SUPERTRONIC 1250, forged pipe clamp, precision<br />
dieheads (70912, 70913, 70914, 70915), plastic case<br />
Description lb No.<br />
SUPERTRONIC 1250, 1/2", 3/4", 1", 1-1/4" NPT 9.4 71453<br />
RONOL ® Cutting Fluid, 6.7 oz (200 ml) 0.8 65018<br />
Forged Pipe Clamp, max. 1-1/4" 3.5 71279<br />
Steel Pipe Cutter, 1-1/4" 2.5 70040<br />
Bucket Oiler 20.0 70753<br />
23<br />
3
3<br />
Portable Power Threaders<br />
SUPERTRONIC 2000<br />
Power Threader<br />
SUPERTRONIC 2000 Set 1/2"–2"<br />
Set includes SUPERTRONIC 2000, forged pipe clamp (71280), ROFIX<br />
Adapter (71271), Precision Die Heads, plastic case<br />
24<br />
l Hardened teeth and jaws on support<br />
arm:<br />
Secure grip in both<br />
turning directions l Large mechanism<br />
for switching direction:<br />
Reverses direction when<br />
l Offset die head mounting:<br />
Allows threading close<br />
to walls<br />
l Direct seating with locking<br />
of tension ring:<br />
Die heads are held<br />
firmly in place<br />
71271<br />
71280<br />
thread is complete<br />
71273<br />
Description lb No.<br />
SUPERTRONIC 2000 Set 42.1 71259L<br />
1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT<br />
SUPERTRONIC 2000 Set for plastic-coated pipe 42.1 P71259C<br />
1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT<br />
RONOL ® Cutting Fluid, 6.7 oz (200 ml) 0.8 65018<br />
Forged Pipe Clamp, max. 2” 3.8 71280<br />
Steel Pipe Cutter, 2" 5.5 70045<br />
Bucket Oiler 20.0 70753<br />
Monoblock adapter 2.0 71273<br />
ROFIX Adapter with locking ring 2.3 71271<br />
SUPERTRONIC 2000 machine only 42.1 71259<br />
l Compact gear housing with excellent overall size:<br />
Ideal for difficult to reach positions (corners, shafts)<br />
Inserting the die heads Fits into tight spaces<br />
Gearing<br />
71259L<br />
Product Profile<br />
FEATURES<br />
l Quick and effortless production of safe precision threaded joints to approved<br />
standards<br />
l Compact dimensions:<br />
Allow for use in difficult to reach positions<br />
l Dust tight casing with sealed lubrication:<br />
Long lifespan, low maintenance<br />
l High reduction gears with spur wheel teeth; 7 parallel gear shafts, each ball<br />
bearing mounted:<br />
High, consistent power transmission level when fully loaded<br />
l Optimized gearing:<br />
High performance output with minimal energy consumption<br />
TECHNICAL DATA<br />
• Motor: 1010 W Universal, double insulated with<br />
VDE and CEE, interference free<br />
• Threading Speed: 15-25 rpm, 60 rpm rapid reverse<br />
For precision die heads<br />
and dies, see page 34<br />
70753<br />
800.545.7698 www.rothenberger-usa.com
MINI-COLLINS ®<br />
Puts power back into power threading – thread up to<br />
2" pipe or conduit, 1" bolt or rod, in seconds!<br />
PNEUMATIC MINI-COLLINS ®<br />
ROTHENBERGER's Pneumatic MINI-COLLINS weighs<br />
only 27 pounds and is the most portable air-powered<br />
threader available!<br />
l For complete safety in hazardous environments such as petroleum<br />
and chemical plants, mines or tunnels.<br />
l Reversible, non-sparking air motor develops 500 foot-pounds of<br />
torque in either direction<br />
l Cannot be damaged by overload, even when operated to point<br />
of stall<br />
70753<br />
00078<br />
00074<br />
00077<br />
13158 00117<br />
800.545.7698 www.rothenberger-usa.com<br />
Product Profile<br />
FEATURES<br />
Power Drives<br />
l Lightweight and engineered to go anywhere – requires only 1-3/4" clearance<br />
for working in trenches, overhead, and in tight quarters where only hand tools<br />
could be used before<br />
l Convenient maintenance – built-in fill plug eliminates disassembly of gearbox<br />
for oiling<br />
l Has the muscle to make any turning job easy – tightens nuts, drives cable<br />
pullers, turns hoists and jacks, opens and closes valves, or drives up to 6"<br />
geared threaders<br />
l Shock-resistant handle and durable construction provide years of safe,<br />
dependable operation<br />
TECHNICAL DATA<br />
MINI-COLLINS ® PNEUMATIC MINI-COLLINS ®<br />
Threading Range:<br />
• Pipe or conduit 1/8" to 2" 1/8" to 2"<br />
• Bolt or rod<br />
• With adapters and<br />
1/4" to 1" 1/4" to 1"<br />
geared threader<br />
Dimensions:<br />
2-1/2" to 6" 2-1/2" to 6"<br />
• Overall length 28" 27"<br />
• Cord length 80" —<br />
• Motor 115V, 15 amp or Reversible air motor<br />
230V, 9 amp, develops 500 ft/lbs,<br />
universal AC-DC forward and reverse;<br />
reversible, requires 90-120 PSI<br />
Switches<br />
50-60 Hz (at 60-80 CFM) input<br />
pressure<br />
• On/Off Deadman Safety lever throttle<br />
(shuts off when released)<br />
• Directional Forward, reverse Forward, reverse<br />
MINI-COLLINS ® Power Drives and<br />
Accessories<br />
Description lb No.<br />
MINI-COLLINS ® Drive, 115V 27.0 00074<br />
Pneumatic Mini-COLLINS ® Drive 29.0 00078<br />
MINI-COLLINS ® Drive, 230V 27.0 13950<br />
Steel carrying case 5.0 00119<br />
Safevise 5.0 00077<br />
Bucket Oiler 20.0 70753<br />
Drop Head Adapters<br />
to drive lb No.<br />
ROTHENBERGER SUPER CUT (enclosed) 3.0 13158<br />
RIDGID ® * 111-R 3.0 00111<br />
RIDGID ® * 12-R No adapter needed<br />
Square shaft 7/8" 3.0 00116<br />
Square shaft 1" (for geared threader) 4.5 00117<br />
Square shaft 1-1/4" 3.0 00118<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
25<br />
3
3<br />
Compact Threading Machines<br />
SUPERTRONIC 2SE/ROPOWER 50R<br />
Portable Compact Threaders<br />
ROTHENBERGER’s portable 2" threading machines offer fast and steady, precision<br />
threading, cutting, de-burring, and grooving. The powerful 750-watt (1 HP) motor<br />
provides strong turning power with consistent torque for swift, effortless production<br />
of accurate, standard pipe and bolt threads. The optional foldable, wheeled<br />
workbench makes transport easy, whether on site or in the workshop. Replacing the<br />
dies is fast and easy due to unique ball-detent feature.<br />
26<br />
l Smooth action impact hammer chuck<br />
Pipes don’t slip<br />
l Rear centering chuck:<br />
For axial alignment<br />
of the pipe<br />
l Work spindle with closed<br />
bearings on both sides:<br />
Low-wear and precise<br />
guiding<br />
Check out this<br />
product on YouTube!<br />
under ROTHENBERGER<br />
Threading<br />
l Automatic die head with<br />
through-the-head oiling:<br />
Easy to use<br />
SUPERTRONIC 2SE<br />
The SUPERTRONIC 2SE uses quick-change dies with a ball-detent feature that<br />
makes aligning replacement dies in the die head fast and easy. The 2SE die<br />
head and dies are compatible with the SUPERTRONIC 4SE threading machine.<br />
Standard supply: 2SE machine with automatic die head 1/2"-2" (52500),<br />
alloy dies (1/2"-3/4" NPT 89101 and 1"-2" NPT 89102), safety foot switch,<br />
set of 4 legs, 1 gallon ROCOOL ® oil (01922)<br />
ROPOWER 50R<br />
The ROPOWER 50R uses RIDGID ® *-compatible dies with the new quick-change<br />
ball detent feature. While other manufacturers’ RIDGID ® * style dies may be<br />
used in the 50R die head (56265), only ROTHENBERGER’s dies snap into<br />
position.<br />
Standard supply: ROPOWER 50R, Automatic die head 1/2"-2" (56265), alloy<br />
NPT dies (1/2"-3/4" 89162 and 1"-2" 86163, set of 4 legs, safety foot switch, 1<br />
gallon ROCOOL ® oil (01922)<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
l Dual-sided tool guide:<br />
Precise guiding<br />
Product Profile<br />
FEATURES<br />
l Motor double insulated:<br />
Work safer<br />
l Stable high torque motor:<br />
Constant power<br />
l Offset spindle lubrication:<br />
Easy to maintain<br />
l Geared oil pump with filter system and adjustable fluid level:<br />
Constant oil flow<br />
l Large plastic chip collection tray:<br />
Easy to clean<br />
l Machine slightly angled:<br />
Reduced oil consumption, oil moistening in pipe interior is avoided<br />
l Standard jaws and dies will work with plastic-coated conduit<br />
TECHNICAL DATA<br />
• NPT: dia. 1/4" - 2"<br />
• Motor Strength: 750 watts (1 HP)<br />
• Speed: 40 rpm (No load)<br />
• Dimensions: 21" x 17" x 13" (L x W x H)<br />
l Ball detent dies:<br />
Quick and easy to change<br />
l Interior deburrer, snap in, 3-blade<br />
Burr-free work<br />
l Sturdy oil pump with high flow power and<br />
adjustable fluid quantities, filter system,<br />
integrated oil feed:<br />
Optimal lubrication and cooling<br />
l Large plastic shavings collection trough:<br />
Easy to clean<br />
See page 35 for cross<br />
reference to Ridgid ® * dies<br />
Optional<br />
l Wheeled folding stand (56051)<br />
Description lb No.<br />
SUPERTRONIC 2SE with Automatic die head 97.0 63004<br />
with NPT Alloy dies 1/2" – 2"<br />
ROPOWER 50R with Automatic die head 97.0 63005<br />
with NPT Alloy dies 1/2"-2"<br />
Wheeled stand 70.0 56051<br />
Mounting Kit for ROGROOVER 4.0 56511<br />
Cutter Wheel 0.5 04510<br />
800.545.7698 www.rothenberger-usa.com
SUPERTRONIC 4SE<br />
4" Threading Machine<br />
l Oil-resistant power cable:<br />
Long life<br />
Threading Head<br />
l Automatic die head:<br />
Ensures proper thread length and depth<br />
l Automatic oil feed:<br />
Provides ideal lubrication and cooling to<br />
maximize die life<br />
Product Profile<br />
FEATURES<br />
ROTHENBERGER's SUPERTRONIC 4SE offers fast and steady threading, cutting<br />
and de-burring up to 4 inches. The powerful, 2-speed, 1-1/2 hp. motor provides<br />
strong turning power with consistent torque for swift, consistent production of<br />
accurate pipe threads either on site or in the shop. Replacing the dies is fast and<br />
easy with the unique ball detent feature. The machine includes 2 automatic die<br />
heads, 3 sets of dies, safety foot switch, and set of 4 legs.<br />
l Easy access to all components:<br />
For quick repair<br />
l Ball detent feature:<br />
Allows quick and easy replacement of dies without removing the die<br />
head<br />
l Chuck jaws are quick and easy to change<br />
l Robust oil pump with flow adjustment and filter system:<br />
Keeps oil free of impurities<br />
l Standard jaws and dies will work with plastic-coated conduit<br />
• Dimensions<br />
TECHNICAL DATA<br />
31" x 21" x 19" (L x W x H)<br />
• Weight: 232 lb.<br />
• Machine Capacity Pipe 1/2"-4"<br />
Bolt 3/8"-2"<br />
• Motor 1-1/2 hp, Universal Single Phase, 115 volt, 1140 Watt<br />
• Threading Speed 48/18 rpm (2 speed)<br />
800.545.7698 www.rothenberger-usa.com<br />
Compact Threading Machines<br />
Additional Features<br />
l Rear centering chuck:<br />
For correct axial alignment<br />
l Smooth action impact hammer chuck:<br />
Powerful, no-slip grip<br />
l Dual tool/feed slide with geared indexing<br />
l Self-centering pipe cutter:<br />
Quickly cuts pipe to<br />
length<br />
l Snap-lock internal, triple deburring<br />
blade:<br />
Removes sharp edges<br />
l Ball detent dies:<br />
Quick and easy to change<br />
l Large, plastic chip tray:<br />
Catches chips and is<br />
easy to clean<br />
l Strong, precise work spindle is guided on both sides by enclosed ball<br />
bearings<br />
l Safety foot switch:<br />
Stops motor in case of emergency<br />
l Will work with plastic-coated conduit<br />
Description lb No.<br />
SUPERTRONIC 4SE 1/2"- 4" 232.0 63006<br />
Automatic die head 1/2"- 2" 18.0 52500<br />
Automatic die head 2-1/2"- 4" 18.0 64350<br />
Alloy Die Set 1/2"-3/4" NPT 2.0 89101<br />
Alloy Die Set 1"- 2" NPT 2.0 89102<br />
Alloy Die Set for Die Head 64350 only 3.0 59912<br />
2-1/2"- 4" NPT<br />
ROCOOL Thread Cutting Oil 1 gallon 8.0 01922<br />
SUPERJACK Pipe Stand for 1/2"- 8" pipe 25.0 10640<br />
ROGROOVER Mounting Kit for 4SE 9.0 56512<br />
Cutter wheel 0.5 04510<br />
Enclosed, wheeled cabinet 16.5 E-239<br />
Open wheeled stand (with tool tray) 56.0 00548A<br />
27<br />
3
3<br />
COLLINS ® High Performance Threading Machines<br />
COLLINS ® CLASSIC 22A<br />
This top-of-the-range threading machine is suitable for the most demanding pipework applications, on-site threading, prefabrication work, or even<br />
production applications. Completely versatile – handles even difficult make-on or breakdown of fittings. High performance output in every way, the<br />
result from over 40 years producing the tried and tested COLLINS ® pipe threaders.<br />
Drive Motor<br />
l Heavy duty, 115 V, universal AC/DC,<br />
50/60 Hz. Develops up to 2.3/4 HP<br />
l 6 brush motor for higher torque<br />
l Easy to service<br />
l Left and right hand optional<br />
l 84db on A scale noise level<br />
Pipe Cutter and Reamer<br />
l Precision pipe cutter with dual guide for<br />
accurate pipe cutting<br />
l 5-Blade conical reamer<br />
No-Load Spindle Speed<br />
l 72 rpm<br />
l Optional 54 and 100 rpm<br />
Die Heads<br />
l Snap-O-Matic ® die heads (2) are standard<br />
l Simple, quick change of dies<br />
without time consuming adjustments<br />
l All controls are clearly marked.<br />
l Automatically adjusted thread length<br />
l Adjustable thread depth<br />
l Threading range:<br />
Pipe or conduit 1/8" to 2"<br />
Bolt or rod 1/4" to 2 1/4"<br />
l Uniquad ® head optional<br />
28<br />
HSS Precision Dies<br />
l Long operating life<br />
l Optimum cutting geometry and excellent<br />
chip discharge<br />
l Can be resharpened<br />
Pipe Chuck<br />
l COLLINS ® SUPER GRIP chucking system<br />
l R/L chucking<br />
l 4 heavy duty jaws at both front and rear of<br />
machine ensure that pipe is automatically<br />
gripped and centered.<br />
l Easy to replace jaws (01623) for both metal<br />
and plastic-coated pipe<br />
l Optional jaws for plastic-coated pipe. (20533)<br />
Oiling and Lubrication<br />
l Rugged and proven oil pump<br />
l Automatic oil feed for optimum cooling<br />
l Large, easy-to-empty, chip tray<br />
l 1 gallon oil reservoir<br />
l Use ROCOOL ® cutting oil, (01922) a special<br />
blend of sulfo-chlorinated mineral oil to<br />
ensure superior quality threads and long<br />
die life.<br />
00579 on 00045 stand<br />
Safety<br />
See page 35 for cross<br />
reference to Ridgid ® * dies<br />
l All units come with a safety foot switch.<br />
Dimensions<br />
l 37-1/2" x 13-1/8" x 18-1/2" (L x W x H)<br />
l Carriage travel 11"<br />
Optional Stands<br />
l Open wheeled stand with tool tray<br />
l Closed wheeled stand with locking<br />
tool cabinet<br />
E-239<br />
Standard Supply: Threading machine (00579) with built-in pipe<br />
cutter and reamer, foot-operated safety switch, 2 snap-o-matic die<br />
heads (00063, 00066), 2 sets of HSS dies (00028, 00031), 1 gallon<br />
oil. (01922)<br />
Description lb No.<br />
COLLINS ® CLASSIC 22A with<br />
Snap-O-Matic ® die heads/dies, 72 rpm, 115V 240.0 00579<br />
Snap-O-Matic ® die heads/dies, 100 rpm, 115V 240.0 00587<br />
Snap-O-Matic ® die heads/dies, 230V 240.0 00592<br />
UNIQUAD ® die heads/dies, 72 rpm, 115V 240.0 00596<br />
Automatic die heads/dies, 72 rpm, 115V 240.0 00597<br />
Automatic ball-detent die head/dies 240.0 00575A<br />
RIDGID ® compatible automatic die heads/dies 240.0 00575R<br />
Basic 22A unit without die head/dies 220.0 00585<br />
Replacement jaws (set 8) 5.5 01623<br />
Low indent jaws for plastic-coated pipe (set 8) 5.5 20533<br />
Reamer, 1/8"-2" conical, 5-blade 6.0 00160<br />
Spare cutter wheel (1) 0.3 00157<br />
Spare cutter wheel (6) 1.0 00158<br />
Cutter assembly, wheel type 11.0 00159<br />
Oil sump baffle 4.0 00155<br />
Open wheeled stand with tool tray 54.0 00045<br />
Threader storage cabinet with wheels 165.0 E-239<br />
Waterproof cover 5.0 00154<br />
Mounting Kit for ROGROOVER 7.0 45001<br />
Switch Assembly 10.0 01297<br />
Switch Handle 0.3 1221-H<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
800.545.7698 www.rothenberger-usa.com
Drive Motor<br />
l Heavy Duty, 115 V, AC/DC 50/60 Hz.<br />
Develops up to 3 HP<br />
l 6-Brush motor for higher torque<br />
l High speed threading – 25 rpm<br />
l Easy to maintain and service<br />
l 85db max. noise level<br />
No Load Spindle Speed<br />
l 25 rpm<br />
Pipe Cutter and Reamer<br />
l Precision pipe cutter with dual guide for<br />
accurate pipe cutting and control for<br />
exact length required<br />
l 5-Blade conical reamer for 1/8" to 2"<br />
l Optional blade reamer for 2-1/2" to 4"<br />
Pipe Chuck<br />
l COLLINS ® SUPER GRIP chucking system<br />
l R/L chucking<br />
l 4 heavy duty jaws at both front and rear of<br />
machine ensure that pipe is automatically<br />
gripped and centered<br />
COLLINS ® High Performance Threading Machines<br />
RHINO ®<br />
1/2" to 4" Threading Machine<br />
This is a top-quality threading machine for standard use by plumbing and electrical contractors.<br />
Standard Supply: Threading machine (00550) with<br />
built-in pipe cutter, reamer (00097), foot operated safety<br />
switch, 2-1/2"- 4" die head (64380) and dies (59912)<br />
Automatic Die Heads<br />
800.545.7698 www.rothenberger-usa.com<br />
l Automatic 2-1/2" to 4"<br />
l Optional 1/2" to 2" automatic die head, small<br />
die head adapter and reamer<br />
l Automatically adjusted thread length<br />
l Threading range with optional package:<br />
Pipe or conduit 1/2" to 4"<br />
Bolt or rod 5/8" to 2-1/4"<br />
Alloy Precision Dies<br />
l Long operating life<br />
l Optimum cutting geometry and excellent<br />
chip discharge<br />
Oiling and Lubrication<br />
Description lb No.<br />
l “Quick Shot” lubricating system<br />
l 2-gallon oil reservoir<br />
l Use ROCOOL ® Cutting Oil, (01922) a special<br />
blend of sulf-chlorinated mineral oil assures<br />
long die life and superior quality threads.<br />
RHINO ® complete machine<br />
with 2-1/2" - 4" automatic die heads & dies<br />
340.0 00550<br />
RHINO ® complete machine with 2-1/2" - 4"<br />
automatic die heads & dies for plastic-coated pipe<br />
340.0 P00551C<br />
RHINO ® optional 1/2" - 2" package with<br />
1/2" - 2" automatic die heads and dies<br />
with 1/2" - 2" conical reamer<br />
27.0 00561<br />
Reamer<br />
1/8" to 2" conical, 5-blade reamer assembly<br />
5.5 00097<br />
1/8" to 2" reamer cone only 5.5 01894<br />
2-1/2" to 4" twin-edged blade 5.0 00107<br />
2-1/2" to 4" reamer assembly 5.0 00551<br />
Cutter assembly 40.0 00106<br />
Spare cutter wheel (one only) 1.0 00104<br />
Spare Cutter Wheel, 3 pk. 1.0 00105<br />
Open wheel stand (with tool tray) 56.0 00548R<br />
Threader storage cabinet with wheels 165.0 E-239<br />
Mounting kit for ROGROOVER 14.0 45004<br />
Contact Factory for Special Voltages, Configurations, and Accessories.<br />
Safety<br />
l All units come with safety foot switch.<br />
l Cut-off switch to limit carriage travel<br />
Optional Stands<br />
l Open wheeled stand with tool tray<br />
l Closed wheeled stand with locking<br />
tool cabinet<br />
l Superjack Pipe Stand with adjustable<br />
height and 2000 lb. capacity<br />
E-239<br />
29<br />
3
3<br />
COLLINS ® High Performance Threading Machines<br />
30<br />
Product Profile<br />
• Range<br />
TECHNICAL DATA<br />
Pipe or conduit 1/2"- 4"<br />
Bolt or rod 19-76 mm, 5/8"- 3"<br />
• Dimensions 60" x 30" x 44-1/2" (L x W x H)<br />
Height to center line of spindle 35-1/2"<br />
Carriage travel 13"<br />
• Motor 5 H.P, 230/460V 3 phase, 50-60 Hz 1170 rpm<br />
(instant reversing)<br />
Optional 5 H.P, 230/460V 1 phase, 50-60 Hz 1170 rpm<br />
Optional 10 HP, 230/460V, 3 phase, 50-60 Hz, 1800 rpm<br />
• Spindle speed 1/2"-1" 48 rpm<br />
while threading 1-1/4"-2" 26 rpm<br />
2-1/2"-3" 16 rpm<br />
3-1/2"-4" 12 rpm<br />
• Switches Three-station push button switch (forward-stop-release)<br />
Optional toggle type (right hand-left hand)<br />
• Starter Magnetic with thermal overload<br />
• Oil Reservoir 5 gallon capacity<br />
Description lb No.<br />
44A Thread-O-Matic ® 1212.0 00039<br />
66A 6" THREAD-O-MATIC ®<br />
Standard unit with one Quad (1"-2"), two Dual (2-1/2"-3", 3-1/2"-4", and<br />
two Mono (5"-6") Snap-O-Matic ® die heads and NPT High Speed dies.<br />
Includes small die head adapter, 1/2"-2" cone reamer assembly, and 1/2"-<br />
2" wheel-type cutter assembly.<br />
Engineered with the same heavy duty construction as the 44A, the 66A<br />
features a welded steel plate frame and base.<br />
This machine is built to order–please call for lead time<br />
Check out this<br />
product on YouTube!<br />
under ROTHENBERGER<br />
Threading<br />
44A 4" THREAD-O-MATIC ®<br />
Top-of-the-line high production unit with three Dual (1/2"-3/4",<br />
2-1/2"-3", and 3-1/2"-4") and one Quad (1"-2") Snap-O-Matic ® die<br />
heads and NPT High Speed dies. Includes small die head adapter and<br />
1/2"-2" cone reamer assembly.<br />
The 44A’s heavy duty construction includes welded steel plate frame<br />
and base.<br />
This machine is built to order–please call for lead time<br />
Product Profile<br />
TECHNICAL DATA<br />
• Range Pipe or conduit 1"– 6"<br />
Bolt or rod 32-90 mm, 1-1/4" – 4"<br />
• Dimensions 48-3/8" x 30" x 45-3/4" (L x W x H)<br />
Height to center line of spindle 36-3/4"<br />
Carriage travel 10"<br />
• Motor 5 HP, 230/460V 3 phase, dual-speed, 50-60 Hz 1170 rpm<br />
(instant reversing)<br />
• Spindle speed 1/2" – 2" 62 rpm<br />
while threading 2-1/2" – 3" 32 rpm<br />
3-1/2" – 4" 16 rpm<br />
5" – 6" 11 rpm<br />
• Switches Three-station push button switch (forward-stop-release)<br />
Optional toggle type (right hand-left hand)<br />
• Starter Magnetic with thermal overload<br />
• Oil Reservoir 5 gallon capacity<br />
Description lb No.<br />
66A THREAD-O-MATIC ® 1700.0 00174<br />
800.545.7698 www.rothenberger-usa.com
Nipple Chucks<br />
1/2" - 2"<br />
Nipple chucks convert unthreaded or short pipe lengths into useful<br />
close-threaded nipples<br />
For 1/2" - 2" pipe — up to schedule 40 (00088, 00089)<br />
Faster and more economical to use than nipple chuck adapter systems<br />
2-1/2" to 4" and 5" to 6"<br />
Patented mechanism expands and self-locks pipe from inside for work on short<br />
pipe lengths<br />
2-1/2" - 4" pipe nipple chuck assembly (00072, 00098)<br />
5" to 6" nipple chuck assembly can be used on both conduit and pipe (00073)<br />
ROGROOVER 6"<br />
00072 00073<br />
l Spacer for standard groove depths:<br />
Adjustable and finely-controlled<br />
arrester for consistent groove depth<br />
800.545.7698 www.rothenberger-usa.com<br />
THREADING ACCESSORIES & ROLL GROOVING<br />
Description lb No.<br />
For use with PANTHER, 1SE, 2SE, 50R, 4SE:<br />
NIPPLE MAX Set, 1/2" - 2" 16.0 00088<br />
Nipple Chuck, 1/2" 0.9 00184<br />
Nipple Chuck, 3/4" 1.2 00185<br />
Nipple Chuck, 1" 1.6 00186<br />
Nipple Chuck, 1-1/4" 2.2 00187<br />
Nipple Chuck, 1-1/2" 2.6 00188<br />
Nipple Chuck, 2" 4.3 00189<br />
External Nipple Chuck, 1/2" - 2" Sch. 80 pipe 15.0 01850<br />
For use with RHINO ® , 22A, 33A, 44A, 66A: 20.0 00089<br />
Nipple Chuck, 1/2" 0.9 00190<br />
Nipple Chuck, 3/4" 1.2 00191<br />
Nipple Chuck, 1" 1.6 00192<br />
Nipple Chuck, 1-1/4" 2.2 00193<br />
Nipple Chuck, 1-1/2" 2.6 00194<br />
Nipple Chuck, 2" 4.3 00195<br />
NIPPLE MAX Set, 1/2" - 2", extension bar ??.? 00199<br />
NIPPLE MAX Set, 1/2" - 2" 16.0 00089<br />
External Nipple Chuck, 1/2" - 2" Sch. 80 pipe 15.0 01850<br />
For use with 33A, 44A, 66A:<br />
Nipple Chuck Assembly for 2-1/2"- 4" pipe 43.0 00072<br />
Nipple Chuck Assembly for 2-1/2"- 4" conduit 50.0 00098<br />
For use with all Collins machines:<br />
Nipple Chuck Assembly for 5"- 6" 50.0 00073<br />
Portable rolling groover for standard and thin-walled steel pipes up to 6" (150 mm).<br />
Particularly suitable for installations, sprinkler systems, larger heating units, and in industrial use, as well as for quick connection of pipes anywhere<br />
welding is not allowed. Lightweight and compact design.<br />
l Allen key mount:<br />
Always on hand<br />
l Easy assembly/dismantling of the case-hardened and<br />
knurled pressure and drive rollers:<br />
Long life<br />
For Model lb No.<br />
ROGROOVER, machine ONLY 27.9 8870922<br />
Please select correct mounting kit below:<br />
ROPOWER 50R and SUPERTRONIC 2SE 8.5 56511<br />
COLLINS ® CLASSIC 22A 8.5 45001<br />
RIDGID ® * 300 8.5 45002<br />
RHINO ® 8.5 45004<br />
SUPERTRONIC 4SE 9.0 56512<br />
44A 9.0 45005<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
Check out this product<br />
on YouTube!<br />
under ROTHENBERGER<br />
Nipple Chucks<br />
l Ratchet drive R/L for adjusting the depth of<br />
standard-conforming groove:<br />
Convenient, easy and fast<br />
l Lightweight aluminum casing:<br />
Easy to transport<br />
31<br />
3
3<br />
Threading Accessories<br />
32<br />
65008<br />
01922<br />
00002<br />
65013<br />
70753<br />
RONOL ®<br />
High-performance cutting oil<br />
l Mineral oil basis<br />
For threading of all materials, including stainless steel<br />
Mineral-based threading oils may not be permissible in drinking water<br />
installations — Please check the pertinent standards in your area.<br />
Description Contents lb No.<br />
RONOL ® Spray 6.8 oz. (200 ml) 0.6 65018<br />
RONOL ® Spray can 20.3 oz. (600 ml) 1.7 65008<br />
RONOL ® SYN<br />
High-performance cutting fluid<br />
l No mineral oils, purely synthetic:<br />
Developed and approved for drinking water and plumbing<br />
installations.<br />
Description Contents lb No.<br />
RONOL ® SYN Spray can 20.3 oz. (600 ml) 1.7 65013<br />
ROCOOL ® Cutting Oil<br />
Special blend of sulfo-chlorinated mineral oil assures long die<br />
life and superior quality threads. ROCOOL ® cutting oil and<br />
automatic through-the-die-head oil flow makes it impossible<br />
to cut a dry thread.<br />
Description lbs No.<br />
ROCOOL ® Cutting Oil (1 gallon) 8.0 01922<br />
ROCOOL ® Cutting Oil (six 1 gallon containers) 48.0 00001<br />
ROCOOL ® Cutting Oil (5 gallons) 40.0 00002<br />
ROCOOL ® Cutting Oil (55 gallons) 480.0 00003<br />
Bucket Oiler 20.0 70753<br />
Safety Foot Switch<br />
For all ROTHENBERGER threading machines.<br />
Corresponds to industrial associations’ safety and accident<br />
requirements, with oil-proof rubber cable and plug.<br />
Model lb No.<br />
3 step, with emergency stop switch, 115V 5.0 00161<br />
800.545.7698 www.rothenberger-usa.com
Tribench with 6" Chain Vise<br />
l Sturdy, one-piece steel frame:<br />
Easily folds for transport<br />
l Includes holes and slots:<br />
For bending, cutting, or attaching tools<br />
l Integrated chain vise:<br />
Up to 6" pipe capacity.<br />
l Interchangeable jaws:<br />
Works with Ridgid ® * 460 model<br />
l Ceiling brace for overhead support of the stand:<br />
Secure frame even during difficult work<br />
Description Size lb No.<br />
Tribench with chain vise 1/8" - 6" 48.0 70752<br />
Top Screw Cam Lock Vise<br />
Tough, powerful, bending device and tube support, forged and hardened,<br />
wear-resistant jaws, powerful chain<br />
l V-shaped support:<br />
Prevents bending during clamping<br />
l Universal vise attachment<br />
l Offset lever and pre-tensioning screw:<br />
Quick fastening<br />
Description lb No.<br />
Vise, 1/8" - 6" O.D. 20.5 70716<br />
SUPERJACK Pipe Stands<br />
Supports full lengths of pipe, 1/2"-8", when using pipe threading<br />
machines<br />
l Height capacity: 27"-50"<br />
l Weight capacity: 2,500 lb. max<br />
l Folding stand includes carrying handle<br />
Model lb No.<br />
SUPERJACK with V-Head 25.0 10640<br />
SUPERJACK with Ball Transfer Head 29.0 00101<br />
Folding SUPERJACK with V-Head 26.0 10641<br />
Folding SUPERJACK with Ball Transfer Head 30.0 10642<br />
One set of Ball Transfer Head 2.45 00100<br />
Bench Yoke Vise<br />
Foldable, with automatic closing hook, milled and hardened upper<br />
and lower support jaw, powerful smooth-running spindle<br />
Description lb No.<br />
Bench Yoke Vise, 1/8" - 4" O.D. 25.0 70711<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
800.545.7698 www.rothenberger-usa.com<br />
10640 10641<br />
Vises and Stands<br />
Ball Transfer Head<br />
33<br />
3
3<br />
Die Heads & Dies<br />
Precision Die Heads<br />
For SUPERTRONIC 1250, 2000 and<br />
SUPER CUT models.<br />
Feature enlarged shaving discharge<br />
chambers for faster threading,<br />
strengthened locking plate and precise<br />
die seating.<br />
For Plastic-coated<br />
Size NPT pipe, NPT lb<br />
1/4" 70907X – 1.3<br />
3/8" 70908X – 1.3<br />
1/2" 70912X P70912C 1.5<br />
3/4" 70913X P70913C 1.5<br />
1" 70914X P70914C 2.0<br />
1-1/4" 70915X P70915C 2.3<br />
1-1/2" 70849X P70849C 5.5<br />
2" 70850X P70850C 6.0<br />
PANTHER ® ,<br />
COLLINS ® CLASSIC 22A<br />
Snap-O-Matic ® Die Heads and Dies<br />
34<br />
00063<br />
00221<br />
Snap-O-Matic ® Die Head<br />
Available in two-position or four-position settings up to 2".<br />
See following pages for the right part number for use with<br />
your machine.<br />
Description 1/8" 1/4" & 3/8" 1/2" & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" lb<br />
Die Head, NPT 00061 00062 00063 00064 00065 00066 10.0<br />
Dies, NPT 00029 00030 00031 00023 00024 00028 1.0<br />
Dies, NPT Stainless 00225 00226 00227 00053 00054 – 1.0<br />
Die Head, NPSM 00202 00201 00200 – – 00203 10.0<br />
Dies, NPSM 00303 00304 00302 – – 00301 1.0<br />
Dies, Plastic – – 02265 – – 02391 1.0<br />
Automatic Opening Pipe Die Heads and Dies<br />
Uniquad ® Pipe Die Heads and Dies<br />
00222<br />
Precision Threading Dies<br />
Precision Dies<br />
Gentle first cut, extreme long life,<br />
4 pieces/pack.<br />
Achieve optimal results with<br />
Original ROTHENBERGER<br />
threading fluid!<br />
Description lb No.<br />
1/4" NPT 0.3 70916X<br />
3/8" NPT 0.3 70917X<br />
1/2" NPT 0.3 70918X<br />
3/4" NPT 0.3 70919X<br />
1" NPT 0.3 70920X<br />
1-1/4" NPT 0.3 70921X<br />
1-1/2" NPT 0.3 70945X<br />
2" NPT 0.4 70946X<br />
Special die head cuts pipe thread lengths the same, time after time —<br />
a hardened steel trip trigger automatically opens at the desired or<br />
standard thread length. Single-lever motion sizes and closes the die<br />
head. The trigger can be swiveled out of position for long-running<br />
threads. Available for die sizes 1/2" – 3/4" or 1" – 2".<br />
Description 1/2" & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" lb<br />
Die Head 00221 00221 00221 00221 10.0<br />
Dies, NPT 00027 00023 00024 00028 1.0<br />
Dies, NPSM 00300 00301 – – 1.0<br />
Uniquad ® Die Head: Fully adjustable, truly versatile die head for up to<br />
2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation.<br />
For threading pipe<br />
Uniquad ® heads use four sets of interchangeable high-speed steel dies:<br />
1/8", 1/4" – 3/8", 1/2" – 3/4", or 1" – 2"<br />
Description 1/8" 1/4" & 3/8" 1/2" & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" lb<br />
Die Head 00222 00222 00222 00222 00222 00222 10.0<br />
Dies, NPT 00025 00026 00027 00023 00024 00028 1.0<br />
Dies, NPT Stainless 00050 00051 00052 00053 00054 – 1.0<br />
Dies, NPSM 00303 00304 00300 – – 00301 1.0<br />
Dies, Plastic 02581 02582 02583 – – 02391 1.0<br />
800.545.7698 www.rothenberger-usa.com
PANTHER ® , COLLINS ® CLASSIC 22A, continued<br />
Uniquad ® Bolt Die Heads and Dies<br />
RHINO ® , 4SE, 2SE, and 1SE<br />
Automatic Opening Pipe Die Heads and Dies<br />
Manual NPSM Pipe Die Heads and Dies.<br />
Manual die heads for parallel NPSM pipe threads<br />
from 1/2" - 3".<br />
52500<br />
Description RO part number RIDGID ® part number<br />
1/2-3/4" Alloy Dies NPT 89162 47745<br />
1-2" Alloy Dies NPT" 89163 47750<br />
1/4"-3/8" H.S Steel Dies NPT" 56383 47760<br />
1/2-3/4" H.S. Steel Dies NPT 00125 47765<br />
1-2" H.S. Steel Dies NPT" 00126 47770<br />
1/4-3/8" Stainless Steel Dies NPT 00217 47780<br />
1/2-3/4" Stainless Steel Dies NPT 00218 47785<br />
1-2" Stainless Steel Dies NPT" 00219 47790<br />
800.545.7698 www.rothenberger-usa.com<br />
Die Heads & Dies<br />
Description Use on 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" lb<br />
Die Head, NPT, Manual 2SE 20165 20165 – – – – – – – – – 11.0<br />
Dies, NPT, Alloy 1SE 89100 89100 89120 89120 89121 – – – – – – 1.0<br />
Die Head, NPT 1SE – – 52091 52091 52091 52091 52091 52091 – – – 18.0<br />
Die Head, NPT 2SE, 4SE, RHINO ® – – 52500 52500 52500 52500 52500 52500 – – – 18.3<br />
Dies, NPT, Alloy 2SE, 4SE, RHINO ® – – 89101 89101 89102 89102 89102 89102 – – – 1.0<br />
Die Head, NPT 4SE, RHINO ® – – – – – – – – 64350 64350 64350 20.8<br />
Dies, NPT, Alloy 4SE, RHINO ® – – – – – – – – 59912 59912 59912 3.0<br />
Die Head, NPSM, Manual 2SE, 4SE, RHINO – – 20171 20171 20171 20171 20172 20172 20172 20172 – 20.0<br />
Dies, NPSM, Alloy 2SE, 4SE, RHINO – – 89148 89148 89149 89149 89150 89150 89151 89151 – 3.0<br />
Note: alloy dies are not resharpenable.<br />
RIDGID ® * Style<br />
Universal "R" Series Dies<br />
Uniquad ® Die Head: Fully adjustable, truly versatile die head for up to<br />
2" pipe and 2-1/4" bolt. Sizing is manual, but still a simple operation.<br />
For threading bolt<br />
Uses either left-hand or right-hand dies to 2-1/4".<br />
Description 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" lb<br />
Die Head 00222 00222 00222 00222 00222 00222 00222 00222 00222 00222 10.0<br />
Dies, UNC 00004 00005 00006 00007 00008 00009 00010 00011 00012 00013 1.0<br />
Dies, UNF 00340 00341 00342 00343 00344 00345 00346 00347 00348 00349 1.0<br />
Description 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/4" lb<br />
Die Head 00222 00222 00222 00222 00222 00222 00222 00222 00222 10.0<br />
Dies, UNC 00014 00015 00016 00017 00018 00019 00020 00021 00022 1.0<br />
Dies, UNF 00350 00351 00352 00353 00354 00355 00356 00357 – 1.0<br />
High Performance Automatic die heads with quick Snap-O-Matic ® type<br />
size selection open automatically at the desired or standard thread<br />
length. Depth of thread can be adjusted for individual sizes and moves<br />
the die head position for long-running threads.<br />
Universal "R" Series Die Head<br />
Will accept "R"-style dies from 1/8" – 2" NPT for the PANTHER and<br />
ROPOWER 50R<br />
Description RO part number<br />
Die Head 50R Manual 1/4"-3/8" 00121<br />
Die Head Panther Manual 1/4"-3/8" 05600<br />
Die Head 50R Automatic 1/2"-2" 56265<br />
Die Head Panther 1/2"-2" 05600<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
35<br />
3
3<br />
Die Heads & Dies<br />
2SE and 50R for Bolt Threads<br />
Manual Opening Die Head and Dies<br />
36<br />
00066<br />
Manual Die Head for bolt threading up to 1" on 2SE and ROPOWER<br />
50R machines<br />
Description 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" - 1-1/4" 1-3/8" - 1-1/2" lb<br />
Die Head 20160 20160 20160 20160 20160 20162 20162 8.5<br />
Dies, UNC, Alloy 89016 89017 89018 89019 89020 89197 89198 1.0<br />
33A and 44A Thread-O-Matic<br />
Snap-O-Matic ® Pipe Die Heads and Dies<br />
Description 1/2 & 3/4" 1" & 1-1/4" 1-1/2" & 2" 1" - 2" 2-1/2" - 3" 3-1/2" - 4" lb<br />
Die Head, NPT 00063 00064 00065 00066 00055 00057 35.0<br />
Dies, NPT 00031 00023 00024 00028 00041 00042 5.0<br />
Dies, NPT Stainless 00227 00053 00054 – 00047 00048 5.0<br />
Die Head, NPSM 00200 – – 00203 00205 00207 35.0<br />
Dies, NPSM 00302 – – 00301 00305 00306 5.0<br />
Dies, Plastic 02265 – – 02391 02364 06676 5.0<br />
Uniquad ® & Snap-O-Matic ® Bolt Die Heads & Dies<br />
Large Snap-O-Matic ® Die Head<br />
Available in two-position in 2-1/2" - 4" for 33A and 44A.<br />
Description 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" lb<br />
Die Head 00222 00222 00222 00222 00222 00222 00222 00222 10.0<br />
Dies, UNC 00010 00011 00012 00013 00014 00015 00016 00017 1.0<br />
Dies, UNF 00346 00347 00348 00349 00350 00351 00352 00353 1.0<br />
Description 1-5/8" 1-3/4" 1-7/8" 2" 2-1/4" 2-1/2" 2-3/4" 3" lb<br />
Die Head 00222 00222 00222 00222 00222 00223 00223 00223 10.0<br />
Dies, UNC 00018 00019 00020 00021 00022 – – – 1.0<br />
Dies, UNF 00354 00355 00356 00357 – – – – 1.0<br />
Die Head Bolt – – – – – 00223 00223 00223 10.0<br />
Dies, UNC RH only – – – – – 00330 00331 00332 1.0<br />
800.545.7698 www.rothenberger-usa.com
66A Thread-O-Matic<br />
Snap-O-Matic ® Pipe Die Heads and Dies<br />
00059<br />
800.545.7698 www.rothenberger-usa.com<br />
Die Heads & Dies<br />
Large Snap-O-Matic ® Die Head<br />
Available in two-position up to 4" and single position<br />
for 5" and 6"<br />
Description 1" - 1-1/4" 1-1/2" - 2" 1’ - 2" 2-1/2" - 3" 3-1/2" - 4" 5" 6" lb<br />
Die Head, NPT 00064 00065 00066 – – – – 10.0<br />
Dies, NPT 00023 00024 00028 – – – – 1.0<br />
Dies, NPT Stainless 00053 00054 – – – – – 1.0<br />
Die Head, NPT – – – 00056 00058 – – 35.0<br />
Dies, NPT – – – 00041 00042 – – 5.0<br />
Dies, NPT Stainless – – – 00047 00048 – – 5.0<br />
Die Head, NPT – – – – – 00059 00060 54.0<br />
Dies, NPT – – – – – 00043 00043 6.0<br />
Dies, NPT Stainless – – – – – 00049 00228 6.0<br />
Die Head, NPSM – – 00203 – – – – 10.0<br />
Dies, NPSM – – 00301 – – – – 1.0<br />
Die Head, NPSM – – – 00206 00208 – – 35.0<br />
Dies, NPSM – – – 00305 00306 – – 5.0<br />
Die Head, NPSM – – – – – 00204 00209 54.0<br />
Dies, NPSM – – – – – 00307 00307 6.0<br />
Uniquad<br />
00222<br />
® Pipe Die Heads & Dies Uniquad ® Die Head<br />
Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4"<br />
bolt. Sizing is manual, but still a simple operation.<br />
For threading pipe<br />
Uniquad ® head uses four sets of interchangeable high-speed steel dies:<br />
1/8", 1/4" – 3/8", 1/2" – 3/4", 1" – 2".<br />
Description 1" - 1-1/4" 1-1/2" - 2" 1" - 2" lb<br />
Die Head 00222 00222 00222 10.0<br />
Dies, NPT 00023 00024 00028 1.0<br />
Dies, NPT Stainless 00053 00054 – 1.0<br />
Dies, NPSM – – 00301 1.0<br />
Automatic Opening Pipe Die Heads & Dies Special die head cuts pipe thread lengths the same, time after time —<br />
a hardened steel trip trigger automatically opens at the desired or<br />
standard thread length. Single-lever motion sizes and closes the die<br />
head. The trigger can be swiveled out of position for long-running<br />
threads. Available for die sizes 1/2" – 3/4" or 1" – 2".<br />
00221<br />
Description 1" - 1-1/4" 1-1/2" - 2" 1" - 2" lb<br />
Die Head 00221 00221 00221 10.0<br />
Dies, NPT 00023 00024 00028 1.0<br />
Dies, NPSM – – 00301 1.0<br />
37<br />
3
3<br />
Die Heads & Dies<br />
66A Die Heads & Dies, continued<br />
Uniquad ® Bolt Die Heads & Dies<br />
Description 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/4" lb<br />
Die Head 00222 00222 00222 00222 00222 00222 00222 00222 10.0<br />
Dies, UNC 00015 00016 00017 00018 00019 00020 00021 00222 1.0<br />
Dies, UNF 00351 00352 00353 00354 00355 00356 00357 – 1.0<br />
Snap-O-Matic ® Bolt Die Heads & Dies<br />
Description 2-1/2" 2-3/4" 3" 3-1/4" 3-1/2" 3-3/4" 4" lb<br />
Die Head, Bolt 66A 00224 00224 00224 00224 00224 00224 00224 35.0<br />
Dies, UNC Right Hand only 00330 00331 00332 00333 00334 00335 00336 5.0<br />
Size Head Centering Grooving & Cutting Double Double Saran<br />
Dies Cutting Bit Only Bevel 45 Bevel 37-1/2" Tools<br />
3/4" - 2" 00471 00489 00477 00478 00480 00479 00481<br />
22A, 33A, 44A (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40)<br />
1" - 2" 00470 00488 00477 00478 00480 00479 00481<br />
All Units (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40 & 80) (Sch. 40)<br />
2-1/2" - 3" 00472 00490 00482 00483 00486 00484 + 00485 00487<br />
33A, 44A (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
2-1/2" - 3" 00475 00490 00482 00483 00486 00484 + 00485 00487<br />
66A (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
3-1/2" - 4" 00473 00491 00482 00483 00486 00484 + 00485 00487<br />
33A, 44A (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
3-1/2" - 4" 00476 00491 00482 00483 00486 00484 + 00485 00487<br />
66A (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
5" - 6" 00474 00492 00482 00483 00486 00484 + 00485 00487<br />
66A (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
2-1/2" - 3" 00574 00490 00482 00483 00486 00484 + 00485 00487<br />
RHINO ® (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
3-1/2" - 4" 00575 00491 00482 00483 00486 00484 + 00485 00487<br />
RHINO ® (Sch. 40 & 80) (Sch. 40, 80, 160) (Sch. 40) (Sch. 40) (Sch. 40 - 160) (Sch. 40)<br />
small Die Head Adaptor 00558<br />
RHINO ® (cut grooving)<br />
38<br />
00222<br />
Grooving and Beveling Die Heads & Tools<br />
Uniquad ® Die Head<br />
Fully adjustable, truly versatile die head for up to 2" pipe and 2-1/4"<br />
bolt. Sizing is manual, but still a simple operation.<br />
For threading bolt<br />
Uses either left-hand or right-hand dies to 2-1/4".<br />
800.545.7698 www.rothenberger-usa.com
COLLINS E-Z CUTTER ®<br />
The fastest 100 pound machine you can buy!<br />
This fast, high-volume, production cutter makes quick work of 1/4"- 4" pipe<br />
and 5/8"- 4-1/2" tubing. The E-Z Cutter ® is built to withstand everyday<br />
knocks and abuses yet light enough to set up anywhere.<br />
Product Profile<br />
FEATURES<br />
l Universal AC/DC motor provides a full 1/2 HP for all-day production needs<br />
l Gear-driven rollers turn the work for true perpendicular cutting<br />
l Ball-bearing assembled cutter wheel revolves freely for even wear<br />
l High-speed tool-steel cutter wheels provide thousands of cuts with no<br />
external burr – so clean that no further finishing is needed before applying<br />
fittings<br />
l Foot switch provides operator safety while freeing both hands for highvolume<br />
production demands<br />
TECHNICAL DATA<br />
• Range Pipe 1/4"- 4" I.D.<br />
Tubing 5/8"- 4-1/2" O.D.<br />
• Dimensions 19" x 10" x 19" (L x W x H)<br />
• Drive Type Gear-driven rollers<br />
• Cutter Wheel Heat-treated, high-speed tool steel<br />
• Motor 1/2 HP Universal AC/DC, 50-60 Hz<br />
Optional 230V motor<br />
All models include a heavy-duty footswitch and one pipe cutter wheel.<br />
Description lb No.<br />
E-Z CUTTER ® Model A, 115V 121.0 00032<br />
E-Z CUTTER ® Model A, 230V 121.0 00533<br />
E-Z CUTTER ® Model C, 115V 125.0 00033<br />
E-Z CUTTER ® Model C, 230V 125.0 00534<br />
C versions include two heavy-duty rollers and two stationary supports<br />
Steel pipe cutter wheel 1.0 00034<br />
For galvanized, black, and stainless steel<br />
Copper tube cutter wheel 1.0 00035<br />
Soil pipe cutter wheel 1.0 00535<br />
Plastic pipe cutter wheel 1.0 00536<br />
Stationary support 3.0 00036<br />
E-Z CUTTER ® stand 40.0 00037<br />
Roller bearing support 3.0 00069<br />
Pipe support fitting 1.0 00071<br />
Foot switch, 115V 8.0 00079<br />
Foot switch, 230V 8.0 02350<br />
800.545.7698 www.rothenberger-usa.com<br />
Production Cutting Machines<br />
Turn your E-Z CUTTER ® into a complete production<br />
system with these timesaving accessories:<br />
FOR BENCH MOUNTING:<br />
l Stationary Support (00036) mounts your 1-1/4" support pipe to the<br />
workbench surface<br />
l Roller Bearing Support (00069) slides onto the support pipe and<br />
provides easy travel and rotation of work.<br />
FOR FLOOR MOUNTING:<br />
Model C on optional stand (00037)<br />
l E-Z CUTTER ® Stand (00037) bolts to the floor for stationary support<br />
l Pipe Support fitting (00071) (with 1" pipe legs) mounts onto 1-1/4"<br />
pipe also using the Roller Bearing Support on support pipe<br />
l Pipe Jack with Ball-Bearing Transport Head (00101) replaces system<br />
of support pipe and fittings, providing a handy alternative for<br />
supporting the work.<br />
39<br />
3
3<br />
Notes<br />
40<br />
800.545.7698 www.rothenberger-usa.com
Hand Tools<br />
800.545.7698 www.rothenberger-usa.com<br />
Tube and Pipe Cutters 42 – 46<br />
Plastic Pipe Shears 47, 48<br />
Pliers 49<br />
Pipe Wrenches 50, 51<br />
Chain Wrenches 51<br />
Deburring and Reaming Tools 52<br />
Basin Wrenches 52<br />
Installation Tools 53<br />
In addition to specialized machines and tools, ROTHENBERGER offers a complete range of<br />
high-quality hand tools for plumbing, heating and climate control systems.<br />
Professional clamping, installation, and cutting tools, as well as vices and workbenches for<br />
mobile applications, clearly demonstrate the breadth of the ROTHENBERGER<br />
product range.<br />
41<br />
4
4<br />
Tube Cutters<br />
ROTRAC Tube Cutters<br />
High precision tube cutter for copper tubes<br />
l Cast aluminum design:<br />
Compact and light<br />
Tube Cutter Replacement Wheels<br />
High precision tube cutter for copper tubes<br />
42<br />
70020<br />
ROTRAC 28 PLUS<br />
Includes 3 copper<br />
wheels for stainless<br />
steel, pin and clip<br />
l Improved design provides smooth-running,<br />
telescopic action:<br />
Consistent working radius, blade<br />
advances faster<br />
70021<br />
ROTRAC 42 PLUS<br />
Includes 3 copper<br />
wheels for stainless<br />
steel, pin and clip<br />
ROTHENBERGER Fits Cutters from<br />
Cutter Wheel Part No. RIDGID ® * Lenox ®<br />
70007B, 2 pack 101, 118, 150, 151,<br />
Fits <strong>Rothenberger</strong> cutters 152, 153, 205<br />
70010, 70011, 70020, 70021 replaces #33185<br />
70017B, 2 pack<br />
Fits <strong>Rothenberger</strong> cutters 10, 15, 20 21010, 21011, 21012, 21013<br />
70401, 70402, 70105, 70019, replaces #33160 replaces #21192, 21017<br />
70065, 70027, 70030<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
l Foldaway Reamer<br />
l Protected screw spindle:<br />
Prevents dirt ingress and jamming<br />
l Features a spare cutter wheel in handle for<br />
cutting stainless steel tube, large knurled knob<br />
Easier to turn<br />
70010 70011<br />
Description O.D. lb No.<br />
ROTRAC 28 1/8" - 1-1/8" 1.0 70010<br />
ROTRAC 42 1/4" - 1-5/8" 1.0 70011<br />
Cutter Wheel, 2 pk. 0.1 70007B<br />
Cutter Wheel, 10 pk. 0.1 70007X<br />
ROTRAC 28 PLUS 1/8" - 1-1/8" 1.0 70020<br />
ROTRAC 42 PLUS 1/4" - 1-5/8" 1.0 70021<br />
ROTRAC 20PL for plastic pipe 1/8" - 3/4" 1.0 70012<br />
ROTRAC 32PL for plastic pipe 3/16" - 1-1/4" 1.0 70013<br />
ROTRAC 42 for flexible gas pipe 1/4" - 1-5/8" 1.0 70018<br />
Replacement pin, clip 0.3 99016<br />
Cutter Wheel, stainless steel 0.1 90007<br />
800.545.7698 www.rothenberger-usa.com
l Large knurled knob, handy design:<br />
Fatigue-free pressure control<br />
l Two guide rollers with recess:<br />
Cuts close to flares<br />
l Handy design with very small working radius<br />
Ideal for hard to reach places<br />
l Large knurled knob, handy design:<br />
Fatigue-free pressure control<br />
l Two guide rollers with recess:<br />
Cuts close to flares<br />
l Handy design with small working radius of 1-3/4" (45 mm):<br />
Ideal for hard to reach places<br />
l Large knurled knob, handy design:<br />
Fatigue-free pressure control<br />
l Two guide rollers with recess:<br />
Cuts close to flares<br />
l Handy design with small working radius of 1-3/4":<br />
Ideal for hard to reach places<br />
l Retractable internal deburrer and spare cutter wheel in handle:<br />
Always within reach<br />
l Two guide rollers with recess:<br />
For cuts close to flares<br />
71019<br />
800.545.7698 www.rothenberger-usa.com<br />
Tube Cutters<br />
MINICUT I PRO / MINICUT II PRO<br />
Tube cutter for copper tubes<br />
Description O.D. lb No.<br />
MINICUT I PRO 1/8" - 5/8" 0.2 70401<br />
MINICUT II PRO 1/4" - 7/8" 0.3 70402<br />
Cutter wheel, 2 pk. 0.1 70017B<br />
Cutter wheel, 5 pk. 0.6 70017D<br />
Axle, screw 0.1 70041<br />
MINICUT 2000<br />
Tube cutter for copper tubes<br />
Ergonomic design of body and knob with seating surface for the<br />
hand during turning<br />
Description O.D. lb No.<br />
MINICUT 2000 1/8" - 7/8" 0.4 70105<br />
Cutter wheel, 2 pk. 0.1 70017B<br />
Cutter wheel, 5 pk. 0.6 70017D<br />
Axle, screw 0.1 70041<br />
MINI MAX<br />
Tube cutter for copper tubes<br />
Ergonomic design of body and knob with seating surface for the<br />
hand during turning<br />
Description O.D. lb No.<br />
MINI MAX 1/8" - 1-1/8" 0.8 70015<br />
Cutter wheel, 2 pk. 0.1 70017B<br />
Cutter wheel, 5 pk. 0.6 70017D<br />
Axle, screw 0.1 70041<br />
TUBE CUTTER 30/50<br />
Tube cutter for copper tubes<br />
Description O.D. lb No.<br />
TUBE CUTTER 30 1/8" - 1-1/8" 0.7 71019<br />
TUBE CUTTER 50 1/2" - 2" 0.8 70065<br />
Cutter wheel, 2 pk. 0.1 70017B<br />
Cutter wheel, 5 pk. 0.6 70017D<br />
Cutter wheel, Stainless Steel, 5 pk. 0.6 70056D<br />
Axle, screw 0.1 70041<br />
43<br />
4
4<br />
Tube Cutters<br />
Automatic Tube Cutter<br />
Ratchet telescopic cutter<br />
Description O.D. lb No.<br />
Automatic size 1 1/8" - 2-5/8" 2.0 70030<br />
Spare cutter wheel size 1, 2 pk. 0.1 70017B<br />
Cutter wheel, size 1, 5 pk. 0.3 70017D<br />
Automatic size 2 2" - 5" 3.5 70142<br />
Automatic size 3 4" - 6-5/8" 4.0 70143<br />
Cutter wheel sizes 2/3, 2 pk. 0.1 70057D<br />
Deburring blade sizes 1/2/3, 10 pk. 0.3 21652B<br />
Axle and screw 0.1 70149<br />
Automatic PL Plastic Tube Cutter<br />
Ratchet telescopic cutter for plastic pipe<br />
Description O.D. lb No.<br />
Automatic PL size 1 1/8" - 2-5/8" 2.0 70031<br />
Cutter wheel, size 1, 3 pk. 0.1 70028D<br />
Automatic PL size 2 2" - 5" 3.5 70032<br />
Clutter wheel, size 2, 3 pk. 0.1 55054D<br />
Axle and screw 0.1 70149<br />
PIPESLICE<br />
Tube Cutter<br />
Cutting copper tubing has never been easier! Simply snap the cutter<br />
onto the tube and turn.<br />
Nominal<br />
Description dia. O.D. lb No.<br />
PIPESLICE 1 3/8" 1/2" 0.6 88807<br />
PIPESLICE 2 1/2" 5/8" 0.6 88810<br />
PIPESLICE 3 5/8" 3/4" 0.6 88808<br />
PIPESLICE 4 3/4" 7/8" 0.6 88802<br />
PIPESLICE 5 1" 1-1/8" 1.0 88814<br />
Cutter wheel for 1/2/3 0.1 88806<br />
Cutter wheel for 4/5 0.1 88803<br />
44<br />
For copper, brass, aluminum, thin-walled steel, and plastic coated tubes<br />
l Ratchet telescopic guide with automatic spring-driven withdrawal:<br />
Quick adjustment, fast opening<br />
l Retractable internal deburring tool and spare cutter wheel in handle:<br />
Always within reach<br />
70031<br />
l Cut tubes with less turns:<br />
Quick cutting of copper tubes<br />
l Self-alignment:<br />
No re-adjustment necessary<br />
l Less space required:<br />
Ideal for hard to reach places<br />
l Cast aluminum casing<br />
800.545.7698 www.rothenberger-usa.com
35 PRO / 42 PRO TUBE CUTTER<br />
Cuts tubes made of:<br />
copper, brass, aluminum, thin-walled steel<br />
PE, PP, PVDF, plastic-coated tubes<br />
stainless steel<br />
l Two guide rollers<br />
with recess:<br />
For cuts near<br />
flares<br />
For Copper, Aluminum<br />
Description O.D. lb No.<br />
35 PRO 1/4"-1-3/8" 1.0 70027<br />
42 PRO 1/4"-1-5/8" 1.2 70029<br />
Cutter wheel, 2 pk 0.3 70017B<br />
Cutter Wheel, 5 pk. 0.3 70017D<br />
For Multi-layer Piping<br />
Description O.D. lb No.<br />
42 PRO MSR 1/4" - 1-5/8" 1.2 70109<br />
Cutter wheel, 1 pk 0.1 70188<br />
For Stainless Steel<br />
Description O.D. lb No.<br />
35 PRO SS 1/4" - 1-3/8" 1.1 70055<br />
42 PRO SS 1/4" - 1-5/8" 1.2 70070<br />
Cutter wheel, SS 0.1 70056<br />
Cutter Wheel, Stainless Steel, 5 pk. 0.3 70056D<br />
Replacement Parts<br />
l Retractable internal tube deburrer:<br />
Always within reach<br />
Description O.D. lb No.<br />
Deburring Blades, 10 pk. 0.3 21652B<br />
Deburring Blades, 1 pk. 0.1 21652<br />
Axle and screw 0.1 70041<br />
800.545.7698 www.rothenberger-usa.com<br />
35 PRO (70027)<br />
42 PRO (70029)<br />
42 PRO MSR (70109)<br />
35 PRO SS (70055)<br />
42 PRO SS (70070)<br />
l Constant, tight working radius of 4-7/8" (123 mm)<br />
l Exact telescopic guide:<br />
Precise cut<br />
l Metal casing with DURAMANT ® coating:<br />
Strong and extremely stable<br />
Perfect for confined spaces<br />
l Easy to turn<br />
adjustment knob:<br />
Quick adjusting of<br />
the working area<br />
Tube Cutters<br />
l Spare cutter wheel (70027 only)<br />
in handle:<br />
Immediately available when<br />
needed<br />
(35 PRO only)<br />
Constant swing radius of 4.8"<br />
45<br />
4
4<br />
Pipe Cutters<br />
1-1/4" and 2" Steel Pipe Cutter<br />
l Wide rollers:<br />
Secure guiding of cutter wheel on tube<br />
Description O.D. lb No.<br />
1-1/4" Pipe Cutter 1/8" - 1-1/4" 2.5 70040<br />
Cutter wheel, 1-1/4", 3 pk. 0.5 70046D<br />
2" Pipe Cutter 1/8" - 2" 5.5 70045<br />
Cutter wheel, 2", 3 pk. 0.5 70051D<br />
Cutter wheel for cast iron, 2" 0.3 70054<br />
2" Pipe Cutter for Plastic Coated Pipe 1/8" - 2" 5.5 P70045C<br />
4" Steel Pipe Cutter<br />
l Wide rollers:<br />
Secure guiding of cutter wheel on tube<br />
l Easy pressure control:<br />
Optimum force transmission onto tube<br />
Description O.D. lb No.<br />
4" Pipe Cutter 2"- 4" 17.0 70060<br />
Cutter wheel, 4", 2 pk. 0.5 70061D<br />
4" Pipe Cutter for Plastic Coated Pipe P70060C<br />
Stainless Steel Pipe Cutters<br />
For exact cutting of stainless steel tubes<br />
Description O.D. lb No.<br />
1-1/4" Stainless Steel Pipe Cutter 1/8"-1-1/4" 2.4 70086<br />
Cutter wheel, 1-1/4" 0.1 70088<br />
2" Stainless Steel Pipe Cutter 1/4" - 2" 4.8 70087<br />
Cutter wheel, 2" 0.1 70089<br />
Chain Tube Cutter<br />
Description O.D. lb No.<br />
MULTICUT 65 1"- 2" 1.3 70285<br />
Cutter wheel chain 0.4 70286<br />
46<br />
l Easy pressure control:<br />
Optimum force transmission onto tube<br />
l Hardened cutter wheel made of high alloy steel:<br />
Long service life<br />
l Burr-free external cutting:<br />
Immediate thread cutting possible<br />
l Optional cutter wheel for cast iron pipes<br />
l 1/8" – 2" Pipe Cutter for Plastic Coated Pipe<br />
l Hardened cutter wheel made of high alloy steel:<br />
Long service life<br />
l Burr-free external cutting:<br />
Immediate thread cutting possible<br />
l Optional cutter wheel for cast iron pipes<br />
l Hardened cutter wheel made of high alloy steel:<br />
Long service life<br />
l Burr-free external cutting:<br />
Immediate thread cutting possible<br />
For copper, brass, aluminum, thin-walled steel tubes, and plastic coated<br />
tubes.<br />
l Stable chain with 15 mini cutter wheels, two-step adjustment:<br />
Ideal for working in confined spaces such as<br />
parallel-running tubes<br />
l Chrome-plated<br />
with PVC<br />
handles<br />
800.545.7698 www.rothenberger-usa.com
ROCUT ® Professional<br />
For precise cutting of PVC, PP, PE, PEX, PB, and CPVC pipes.<br />
Rugged precision shears for effortless cutting of plastic pipes.<br />
l Double- sided blade and ratchet support:<br />
Precise force transfer and precise<br />
guided cutter feed<br />
l Stainless steel blade with V-edge:<br />
Pin-point precision without<br />
deformation<br />
l Ideally meshed cutting curve:<br />
Minimum effort during<br />
cutting<br />
l Wide pipe support:<br />
Precise, right-angled cut<br />
l Teflon coated blade<br />
800.545.7698 www.rothenberger-usa.com<br />
l Rubber handle:<br />
Secure grip<br />
52000<br />
Plastic pipe shears<br />
ROCUT ® Professional 42TC<br />
ROCUT ® Professional 50TC<br />
ROCUT ® Professional 75TC<br />
l Releasing lever:<br />
Automatic, controlled<br />
opening of the blade at<br />
the push of a button<br />
l Lockable lever:<br />
Shear arms lockable in<br />
transport<br />
position<br />
Max. Sch.<br />
Description 40 PVC Max. O.D. lb No.<br />
ROCUT ® 42TC 1-1/4" 1-5/8“ 1.0 52000<br />
Blade, replacement 0.3 52042<br />
Axle and nut, replacement 0.1 80205<br />
Spring, replacement 0.3 5680204<br />
Max. Sch.<br />
Description 40 PVC Max. O.D. lb No.<br />
ROCUT ® 50TC 1-1/2" 2" 1.4 52010<br />
Spare stainless steel blade 0.4 52011<br />
Axle and nut, replacement 0.1 80205<br />
Spring, replacement 0.3 5685004<br />
ROCUT ® Professional 63TC<br />
Max. Sch.<br />
Description 40 PVC Max. O.D. lb No.<br />
ROCUT ® 63TC 2" 2-1/2" 1.4 52030<br />
Spare stainless steel blade 0.4 52031<br />
Axle and nut, replacement 0.1 80205<br />
Spring, replacement 0.3 5685004<br />
Max. Sch.<br />
Description 40 PVC Max. O.D. lb No.<br />
ROCUT ® 75TC 2-1/2" 3" 3.6 52015<br />
Spare stainless steel blade 0.5 52016<br />
Spring, replacement 0.3 5687504<br />
47<br />
4
4<br />
Plastic Pipe Shears<br />
48<br />
Check out this<br />
product on YouTube!<br />
under ROTHENBERGER<br />
Plasticuts<br />
See our other PEX Tools on page 20!<br />
PLASTICUT PEX & CPVC CUTTER<br />
Pipe cutter ideal for use in confined spaces. No force required<br />
to operate. Lightweight and simple to use. Cuts PEX and<br />
CPVC 1/2" to 1".<br />
Description Max. O.D. lb No.<br />
PLASTICUT, 1/2" 1/2" 0.1 59060<br />
PLASTICUT, 3/4" 3/4" 0.1 59070<br />
PLASTICUT, 1" 1" 0.1 59080<br />
Replacement Blade, 1/2", 3/4", 3 pk. 0.1 59000<br />
Replacement Blade, 1", 3 pk. 0.1 59001<br />
ROCUT ® 32TC PEX Cutter<br />
New light and sturdy cutter for PE, PEX, PP, CPVC, and multi-layer<br />
pipe. Blade is flat to “turn and cut."<br />
Description Max. O.D. lb No.<br />
ROCUT 32TC 1-1/4" 1.6 52040<br />
Replacement Blade 52041<br />
ROCUT ® 26TC PEX Cutter<br />
New direct cut action shear with a stainless steel blade for fast and<br />
accurate cuts on PE, PEX, PP, and CPVC plastic pipe.<br />
Description Max. O.D. lb No.<br />
ROCUT 26TC 1" 0.8 52005<br />
Direct Cut PEX Shear<br />
New direct cut action shear with a stainless steel blade for fast and<br />
accurate cuts on PE, PEX, PP, and CPVC plastic pipe.<br />
Description Max. O.D. lb No.<br />
Direct Cut Shear 1-3/8" 4.5 55089<br />
Economy Plastic Pipe Shears<br />
Standard action cutters provide a fast, clean cut on most types of<br />
plastic pipes.<br />
Max. Sch<br />
Description 40 PVC Max. O.D. lb No.<br />
ROCUT ® 32 1" 1-1/8" 1.2 55090E<br />
ROCUT ® 42 1-1/4" 1-5/8" 1.6 55091E<br />
ROCUT ® 63 2" 2-3/8" 3.5 55095E<br />
Replacement Blade for ROCUT 32 0.5 50032<br />
Replacement Blade for ROCUT 42 0.8 50042<br />
Replacement Blade for ROCUT 63 1.5 50063<br />
800.545.7698 www.rothenberger-usa.com
ROGRIP ®<br />
Self-adjusting multi-purpose pliers<br />
Optimal for use on various forms of<br />
material. With a perfect grip and<br />
improved leverage, the ROGRIP<br />
offers many advantages over<br />
conventional pliers.<br />
Made of drop forged chrome<br />
vanadium steel.<br />
l Twice-hardened:<br />
Long service life<br />
l High quality DURAMANT ®<br />
surface coating:<br />
Wear-resistant surface<br />
protection<br />
l Double hardened teeth:<br />
Firm grip on any surface, even<br />
under the toughest conditions<br />
Description Max. O.D. lb No.<br />
ROGRIP ® 10" 1-5/8" 1.0 70558<br />
ROLOCK ®<br />
800.545.7698 www.rothenberger-usa.com<br />
l Improved leverage compared to<br />
conventional pliers:<br />
Optimum force transmission<br />
The new ROLOCK ® Pliers, a professional-grade water pump pliers with jaw locking system,<br />
provide a secure grip on round, square or hex-shaped items with the push of a button.<br />
l Multi-purpose jaws grip<br />
round, flat, square or hex<br />
items<br />
Water Pump Pliers<br />
l 14 groove opening positions:<br />
Opening capacity of 2-1/3"<br />
l Strong jaws:<br />
Won’t slip, even on smooth<br />
surfaces<br />
l Asymmetrical gripping surfaces,<br />
rhombus-shaped:<br />
Optimum grip<br />
l Induction hardened teeth<br />
with high wear resistance:<br />
Long service life<br />
Max. O.D. lb No.<br />
7" 1" 0.5 70521<br />
10" 1-1/4" 0.8 70522<br />
12" 1-1/2" 0.1 70523<br />
l Automatic fit on various forms of<br />
material up to 1-5/8" (42 mm) dia.<br />
One handed operation, even for<br />
larger tube diameters<br />
Pliers<br />
l Ergonomically shaped<br />
cushioned handles:<br />
Strong grip, anti-slip<br />
l Finger guard prevents<br />
pinching of fingers<br />
Increased job safety<br />
Grips hexagonal<br />
shapes Grips pipes Grips sheets Grips fittings<br />
l Patented enclosed, adjusting lock system<br />
provides fast selection of the opening size with<br />
the touch of a button<br />
l Adjustable for 7 sizes, stable, tough:<br />
Variable use<br />
l Non-slip, rubber handle grips:<br />
Secure, anti-slip<br />
l Durable, double-hardened, chrome<br />
vanadium steel with black oxide finish:<br />
Resists corrosion<br />
Description lb No.<br />
ROLOCK ® 7" 0.5 70531<br />
ROLOCK ® 10" 0.8 70532<br />
ROLOCK ® 12" 1.0 70533<br />
l Longer, thinner pliers with<br />
measurements for corners:<br />
Ideal for hard to reach places<br />
l Ergonomically shaped anti-slip,<br />
plastic covered legs:<br />
Firmer grip<br />
l Crush and clamp guard:<br />
Protects fingers<br />
Complies with DIN 5231 D, with heavy duty box<br />
joint, chrome vanadium steel, drop forged,<br />
tempered, polished head and joint<br />
49<br />
4
4<br />
Pipe Wrenches<br />
Adjustable Wrench<br />
Chrome vanadium steel, drop forged, chrome-plated and polished<br />
l Smooth-running, robust roller with minimum play in the<br />
sliding guides<br />
HEAVY DUTY Pipe Wrench<br />
50<br />
Max. O.D. lb No.<br />
8" 1" 1.0 70150<br />
10" 1-1/2" 2.0 70151<br />
12" 2" 3.5 70152<br />
14" 2" 4.5 70153<br />
18" 2-1/2" 6.5 70154<br />
24" 3" 10.5 70155<br />
36" 5" 20.0 70156<br />
48" 6" 37.0 70157<br />
ALUMINUM Pipe Wrench<br />
Pipe Wrench Parts<br />
lb No.<br />
6" 0.5 70441<br />
8" 0.8 70442<br />
10" 1.0 70443<br />
12" 1.5 70444<br />
15" 2.5 70445<br />
Max. O.D. lb No.<br />
10" 1-1/2" 2.0 70159<br />
14" 2" 3.0 70160<br />
18" 2-1/2" 4.0 70161<br />
24" 3" 6.0 70162<br />
36" 5" 11.5 70163<br />
48" 6" 20.0 70164<br />
ALUMINUM Pipe Wrench for PVC Coated Conduit<br />
10" 1-1/2" 2.0 P70159C<br />
14" 2" 3.0 P70160C<br />
18" 2-1/2" 4.0 P70161C<br />
24" 3" 6.0 P70162C<br />
Wrench Set of Heel Jaw<br />
Size Springs Nut and Pin Hook Jaw<br />
8" 70170 70180 70190 70200<br />
10" 70171 70181 70191 70201<br />
12" 70172 70182 70192 70202<br />
14" 70173 70183 70193 70203<br />
18" 70174 70184 70194 70204<br />
24" 70175 70185 70195 70205<br />
36" 70176 70186 70196 70206<br />
48" 70177 70187 70197 70207<br />
Monoblock cast body with high strength,<br />
double T profile, forged jaw and hook,<br />
fine-polished teeth set against turning direction,<br />
induction hardened, tempered, and anti-slip<br />
adjustment screw.<br />
Complies with US standard GGG-W-651 Type I Class A<br />
l Spring-supported hook:<br />
One-handed ratchet-like use<br />
l Quick preset of tube diameter using scale on hook<br />
Features similar to HEAVY DUTY<br />
Complies with US standard GGG-W-651 Type I Class B<br />
l Extremely light aluminum alloy with high strength:<br />
Approx. 40% lighter<br />
l ALUMINUM Pipe Wrench for PVC Coated Conduit has<br />
specially designed jaws for gripping coated pipe<br />
Protects plastic coating<br />
ROTHENBERGER pipe wrench parts are interchangeable with<br />
Ridgid ® * and other industry pipe wrenches.<br />
*Ridgid ® is a registered trademark of Ridge Tool Co.<br />
800.545.7698 www.rothenberger-usa.com
HEAVY DUTY End Pipe Wrench<br />
Features similar to HEAVY DUTY<br />
Complies with US standard GGG-W-651 Type IV<br />
l Offset wrench head:<br />
Ideal for work in confined spaces or close to walls<br />
ALUMINUM Offset Pipe Wrench<br />
Features similar to HEAVY DUTY<br />
Complies with US standard GGG-W-651 Type I Class B<br />
l Extremely light aluminum alloy with high strength:<br />
Approx. 40% lighter<br />
l Offset wrench head:<br />
Ideal for work in confined spaces or close to walls<br />
Chain Pipe Wrench 4"<br />
Profile handle made of drop forged, chrome<br />
vanadium steel, polished head and powerful chain<br />
made of tempered special steel<br />
l With a double-sided teeth surface set against the<br />
turning direction:<br />
Works in both directions without re-inserting<br />
HEAVY DUTY Chain Pipe Wrench<br />
Very tough design for the most demanding applications, tried and tested<br />
in pipeline construction. Forged jaws and handle; replaceable jaws.<br />
l Strong chain made of tempered special steel:<br />
Fits every cross-section<br />
l Double-sided tooth system for ratchet-like use:<br />
For right and left-handed motion<br />
800.545.7698 www.rothenberger-usa.com<br />
Pipe Wrenches / Chain Wrenches<br />
Max. O.D. lb No.<br />
10" 1-1/2" 1.7 70166<br />
14" 2" 3.2 70167<br />
Max. O.D. lb No.<br />
14" 2" 3.0 70115<br />
18" 2-1/2" 4.0 70116<br />
Max. O.D. lb<br />
12" 4" 2.0 70235<br />
No.<br />
Max. O.D. lb No.<br />
27" 2-1/2" 6.0 70243<br />
37" 4" 12.0 70244<br />
44" 6" 25.0 70245<br />
50" 8" 33.0 70246<br />
63" 12" 62.0 70247<br />
51<br />
4
4<br />
Deburring and Reaming Tools / Basin Wrenches<br />
Universal Internal/External<br />
Deburring Tools<br />
Quick and easy deburring<br />
For copper, steel and stainless steel, with polished cutting bit<br />
made of hardened special steel<br />
Description O.D. lb No.<br />
Heavy Duty, for copper and stainless steel 3/8" - 2" 0.4 70075<br />
Heavy Duty, for copper and stainless steel 1/8" - 1-3/8" 0.3 11006X<br />
For copper and plastic 1/8" - 1-5/8" 0.3 11006<br />
Ratchet Pipe Reamer 1/4 - 2"<br />
Rapid and clean deburring<br />
For steel tubes, with smooth-running ratchet, cutting bit made of<br />
tempered steel<br />
Description O.D. lb No.<br />
Ratchet internal reamer blade 1/4" - 2" 5.9 70289<br />
Spare reamer blade 0.5 70296<br />
Deburring Tools<br />
For fast deburring of edges, tubes and sheets; replaceable blades<br />
Description lb No.<br />
Deburring tool with HSS deburring blade 0.1 21660<br />
Note: Blade not replaceable<br />
Deburring tool with deburring blade no. 1 0.2 21655<br />
HSS deburring blade no. 1 universal, 1 pk. 0.3 21652<br />
HSS deburring blade no. 1 universal, 10 pk. 2.8 21652B<br />
HSS = High Speed Steel<br />
Telescopic Basin Nut Wrench<br />
Chrome-plated, with pivoted reversible jaw<br />
l Telescopic action:<br />
4 length adjustments<br />
Description lb No.<br />
Telescopic Basin Wrench, 3/8" - 1-1/4" 2.0 70225<br />
Telescopic Basin Wrench, 1-1/4" - 2-1/2" 3.0 70226<br />
Standard Basin Nut Wrench<br />
Chrome-plated, with pivoted reversible jaw<br />
Description lb No.<br />
Basin Nut Wrench, 3/8" - 1-1/4" 2.0 70236<br />
52<br />
11006X<br />
11006<br />
21660<br />
21655<br />
21652<br />
70225<br />
70075<br />
800.545.7698 www.rothenberger-usa.com
800.545.7698 www.rothenberger-usa.com<br />
Strap and Fittings Wrench<br />
Made of special aluminum alloy, with replaceable nylon strap.<br />
l Safe to use on chrome-plated fittings:<br />
No damage to polished surfaces<br />
Max. O.D. inch lb No.<br />
3" 12" 1.0 70240<br />
8" 12" 1.3 70241<br />
SANIGRIP PL Plier<br />
Installation Tools<br />
Special chrome vanadium steel, drop forged, chrome-plated,<br />
4 adjustable sizes at joint. With teethed grip jaws, SANIGRIP PL<br />
features plastic jaws to protect fittings.<br />
l Ideal for plastic screw joints up to dia. 2-3/8" (62 mm):<br />
Optimum grip<br />
l Secure and gentle grip on precious fittings:<br />
No damage to polished surfaces<br />
Description inch Max. O.D. lb No.<br />
SANIGRIP PL 10" 2-3/8" 0.6 70416<br />
Spare plastic jaws (pair) 0.1 70417<br />
Plumber‘s 7-piece Repair Kit<br />
All the tools you need for a typical repair job in a sturdy carrying<br />
case. Thread, grip and cut 1/2" through 1" pipe.<br />
Kit includes: heavy duty tool bag (40231), ROTRAC 42 Plus (70021),<br />
18" aluminum pipe wrench (70161), ROCUT 50TC shear (52010),<br />
ROFIRE swivel torch (35016), 10" plumber‘s pliers (70522), basin<br />
wrench (70225)<br />
Description lb No.<br />
Plumber's 7-piece Repair Kit 17.8 70615<br />
Tool Bag 4.0 40231<br />
53<br />
4
4<br />
Notes<br />
54<br />
800.545.7698 www.rothenberger-usa.com
Testing and Freezing<br />
Technology<br />
Test Pumps 56<br />
Electric Pipe Freezing 57, 58<br />
CO2 Pipe Freezing 59<br />
FREEZE-PAK 59<br />
ROTHENBERGER test pumps reliably verify system integrity and help identify leaks so they<br />
can be repaired before they cause larger problems.<br />
High-tech freezing equipment allows repairs to plumbing systems with a very short<br />
interruption of service.<br />
55<br />
5
5<br />
Test Pumps<br />
RP50-S<br />
Precision Test Pumps<br />
For quick and exact compression testing and leak testing on pipe<br />
systems and containers in plumbing and heating installation, and<br />
in boiler and pressure vessel manufacture. Ideal for filling solar<br />
systems. Indispensable testing device for every installer. Fill and<br />
compression test in one work session, with water or oil.<br />
Description Max. Pressure lb No.<br />
RP50 Test Pump 60 bar/860 psi 16.0 60200<br />
RP50-S Repair Kit 0.15 60201<br />
TP25<br />
Test pump for quick compression testing<br />
For leak testing of smaller pipe systems and containers in plumbing<br />
and heating installations.<br />
Description Max. Pressure lb No.<br />
TP25 Test Pump 25 bar/363 psi 16.0 60250<br />
TP25 Repair Kit 0.20 60251<br />
56<br />
Product Profile<br />
TECHNICAL DATA<br />
• Testing and pressure range: 0–60 bar, 1 bar steps<br />
0–860 psi, 20 psi steps<br />
0–6 MPa, 0.1 MPa steps<br />
• Tank capacity: 3.2 gal<br />
• Suction capacity: 1.5 oz/stroke<br />
• Dimensions: 28-1/2”x6-5/8”x10-1/4” (L x W x H)<br />
• Connections: R 1/2”<br />
Product Profile<br />
TECHNICAL DATA<br />
• Testing and pressure range 0–25 bar, 1 bar steps<br />
0–363 psi, 20 psi steps<br />
• Tank capacity: 1.2 gallon<br />
• Suction capacity: 0.67 oz/stroke<br />
• Dimensions: 17-3/8”x7-7/8”x9-1/2” (L x W x H)<br />
• Connections: R 1/2”<br />
Cut-off valve in<br />
monoblock design<br />
l Steel reinforced<br />
test hose:<br />
No false reading<br />
from hose bulging.<br />
l Steel reinforced test hose:<br />
No false reading from<br />
hose bulging<br />
l Distortion proof handle with<br />
lockable arm<br />
Ergonomic rubber grip<br />
doubles as carrying<br />
handle<br />
l Single-valve system:<br />
Simple operation<br />
l High performance:<br />
Long stroke for<br />
quick filling<br />
l Twin valve system in monoblock design:<br />
Constant pressure levels and reduction<br />
of leak-prone connections<br />
l Small dimensions:<br />
Ideal for tight spaces<br />
l Weather- and cold-resistant tank:<br />
Durament-epoxy coating<br />
800.545.7698 www.rothenberger-usa.com
ROFROST ® TURBO 1-1/4" & 2"<br />
High tech pipe freezing system for copper, steel, and plastic<br />
composite pipes<br />
Ideal for maintenance, repair, and expansion work in plumbing and<br />
heating installations<br />
l Large temperature display:<br />
Secure, controlled<br />
freezing and monitoring<br />
Anti-kink, diffusion proof, monotube<br />
system with plastic capillary pipes<br />
guarantees high flexibility and<br />
uninterrupted operation<br />
l Compact design:<br />
Portable use, optimal for service industry l Plastic capillary pipes:<br />
High flexibility and uninterrupted<br />
operation<br />
l Simple clamping system:<br />
Usable even in confined spaces<br />
Excellent for working close to walls<br />
or on floors<br />
800.545.7698 www.rothenberger-usa.com<br />
Electric Pipe Freezing Systems<br />
Use for parallel-running pipes<br />
and in confined spaces<br />
Product Profile<br />
FEATURES<br />
l Ergonomically formed freezing clamps:<br />
Simple clamping, even in confined spaces<br />
l Equal ice build-up on pipe:<br />
Protects materials<br />
l CFC-free refrigerant:<br />
Environmentally friendly<br />
l Fully automatic, controlled freezing:<br />
Saves time and money<br />
l Self-contained freezing unit:<br />
No need to use refrigerant, no transport of steel canisters<br />
l Short freezing times:<br />
Eliminates long interruption of heating or water supply<br />
l 6 standardized adaptor sets:<br />
Covers 15 pipe dimensions<br />
Good close to walls, only 2 inches<br />
contact surface required<br />
57<br />
5
5<br />
ROFROST Electric Pipe Freezing Systems<br />
ROFROST ® TURBO 1-1/4"<br />
Refrigeration set with 2 refrigeration hoses and freezing clamps for<br />
l copper O.D. 3/8" – 1-3/8"<br />
l steel dia. 1/8" – 1-1/4"<br />
l plastic and multilayer composite pipes<br />
Set includes 7 reduction inserts, each with 2 half-shells, sizes II, IV, VI,<br />
VII, VIII, X, and XII for copper pipes O.D. 1/2", 5/8", 3/4", 7/8", 1",<br />
1-1/8", 1-3/8", and steel pipes dia. 1/2", 3/4", 1", 1-1/4"<br />
Description lb No.<br />
ROFROST ® TURBO 1-1/4" 55.0 62202<br />
58<br />
ROFROST ® TURBO 2"<br />
Refrigeration set with 2 refrigeration hoses and freeze clamps for<br />
l copper O.D. 3/8" – 2-3/8"<br />
l steel dia. 1/8" – 2"<br />
l plastic and multilayer composite pipes<br />
Set includes 4 reduction inserts, each with 2 half-shells, sizes A, D,<br />
E, and F for copper pipes O.D. 1-3/8", and steel pipes dia. 3/4", 1",<br />
1-1/4", 1-1/2"<br />
Optional Expansion Set (62230) for copper pipes O.D. 1/2", 5/8",<br />
7/8", and steel pipes dia. 1/4", 1/2"<br />
Space requirements for freezing clamps<br />
ROFROST ® ROFROST TURBO 2"<br />
® TURBO 1-1/4"<br />
Amin = 1.1 in<br />
Bmin= 1.5 in<br />
Use on vertical pipes in<br />
corners<br />
Amin= 2.1 in<br />
Use on pipe wall<br />
fittings/valves<br />
Bmin = .6 in<br />
Use on vertical pipes on<br />
walls<br />
Description lb No.<br />
ROFROST ® TURBO 2" 55.0 62205<br />
Reduction Inserts 1-1/4" Reduction Inserts 2"<br />
Reduction<br />
Insert copper pipe steel pipe lb No.<br />
Size O.D. dia.<br />
Size I 3/8" 1/8" 0.2 62217<br />
Size II 1/2" - 0.2 62211<br />
Size IV 5/8" - 0.2 62219<br />
Size VI 3/4" - 0.2 62224<br />
Size VII 7/8" 1/2" 0.2 62214<br />
Size VIII 1" - 0.2 62226<br />
Size IX - 3/4" 0.2 62215<br />
Size X 1-1/8" - 0.2 62227<br />
Size XII 1-3/8" 1" 0.2 62216<br />
ROFROST ® Heat Conductive Paste<br />
Description Content lb No.<br />
ROFROST ® Heat Conductive Paste 150 ml 0.5 62291<br />
Reduction<br />
Insert copper pipe steel pipe lb No.<br />
Size O.D. dia.<br />
Size A - 3/4" 0.2 62231<br />
Size B 1-1/8" - 0.2 62232<br />
Size C 1-1/4" - 0.2 62233<br />
Size D 1-3/8" 1" 0.2 62234<br />
Size E - 1-1/4" 0.2 62235<br />
Size F - 1-1/2" 0.2 62236<br />
Size G 2-1/8" - 0.2 62237<br />
Expansion Set for copper O.D. 1/2", 5/8", 7/8" 1.5 62230<br />
and steel dia. 1/4", 1/2"<br />
The reduction insert Size E also serves as an adaptor piece for fitting<br />
ROFROST ® TURBO 1-1/4" reduction inserts, from size I - size XII.<br />
Amin= 1.5 in<br />
Bmin= 1.8 in<br />
Use on vertical pipes in<br />
corners<br />
Amin= 2.3 in<br />
Use on pipe wall<br />
fittings/valves<br />
For optimal heat conduction between cold<br />
sleeve, reduction insert and pipe surface,<br />
residue free work, physiologically neutral.<br />
Bmin= .7 in<br />
Use on vertical pipes on<br />
walls<br />
800.545.7698 www.rothenberger-usa.com
ROFROST ® CO 2 Set<br />
Manual freezing set<br />
For quick, easy and CFC-free freezing using carbon dioxide of:<br />
copper pipes dia. 1/2" – 2-1/8"<br />
steel dia. 1/8" – 2"<br />
plastic pipes as well as multilayer composite tubes<br />
Set includes: 2 handles with feed valves (65032), 2 high pressure<br />
hoses (65033), 10 prs. of freezer heads (2 for ea. pipe dimension),<br />
T-piece for bottle connection (65034), stopper for one-sided<br />
freezing (65049), wrench (65045), internal hex screwdriver (65046),<br />
plastic case<br />
copper pipe steel pipe<br />
Description O.D. dia. lb No.<br />
ROFROST ® CO2 Set 1/2" – 2-1/8" 1/8" – 2" 13.0 65030<br />
Handle with feed valve and bayonet connection 0.4 65032<br />
High pressure hose, 6-1/2 ft 0.3 65033<br />
Nozzle and filter piece for feed valve 0.3 65048<br />
ROFROST ® Freezing Heads<br />
Size No. copper pipe steel pipe No.<br />
O.D. dia. lb<br />
I 1/2" 1/8" 0.5 65035<br />
2 - 1/4" 0.5 65036<br />
3 5/8" 3/8" 0.5 65037<br />
4 3/4" - 7/8" 1/2" 0.5 65038<br />
5 1-1/8" 3/4" 0.5 65039<br />
6 1-3/8" 1" 0.5 65040<br />
7 1-5/8" 1-1/4" 0.5 65041<br />
8 - 1-1/2" 0.5 65042<br />
9 2-1/8" - 0.5 65043<br />
10 - 2" 0.5 65044<br />
800.545.7698 www.rothenberger-usa.com<br />
l Freezing heads offer constant block<br />
clamping of pipe diameter:<br />
No breaking freezing sleeve<br />
l No emptying of pipes required<br />
Fast, safe application<br />
Made of durable, cold-resistant plastic. 65043<br />
FREEZE-PAK<br />
Check out this<br />
Instant pipe freezing kit<br />
product on YouTube!<br />
under ROTHENBERGER<br />
The FREEZE-PAK is the ideal way to make<br />
quick repairs without draining or interruption Freeze-Pak<br />
of water supply. Quick Freeze spray produces<br />
a temporary ice plug in plumbing and heating<br />
systems that will last up to 30 minutes.<br />
Foam sleeves wrap pipe and are<br />
fastened with plastic ties.<br />
Kit includes 1 can Quick Freeze spray (64001), 2 foam pipe jackets,<br />
4 plastic ties<br />
Description lb No.<br />
FREEZE-PAK kit 1.7 64004<br />
Foam pipe jacket replacement, 2 pieces 0.3 64002<br />
Quick Freeze Spray replacement, 17.5 oz. (500 g) 1.4 64001<br />
65044<br />
Quick Freeze is sprayed into center of foam wraps until frost<br />
appears on outside, indicating pipe section is frozen.<br />
CO 2 Pipe Freezing<br />
65035<br />
Product Profile<br />
FEATURES<br />
l Produces an ice plug in 10 minutes<br />
l Works on copper, iron, lead or plastic pipes<br />
l No need to drain system<br />
l Works vertically and horizontally<br />
l Safe to use - CFC free<br />
TECHNICAL DATA<br />
• Size range: 1/4" - 1" O.D.<br />
l Carbon dioxide offers<br />
high refrigeration power<br />
up to -79°C/-110°F:<br />
Extremely short<br />
freezing times<br />
NOTE: Only use bottles<br />
with standpipes<br />
l Plastic freezer heads:<br />
Efficient freezing in<br />
minimal space<br />
65036<br />
Repair is made between 2 frozen pipe<br />
sections.<br />
59<br />
5
5<br />
Notes<br />
60<br />
800.545.7698 www.rothenberger-usa.com
Soldering and Brazing<br />
Equipment<br />
ROFIRE HAND TORCH 62<br />
SUPER FIRE 3 62<br />
SWEATBOX II 63<br />
SUPER FIRE 2 63<br />
FLAME REFLECTOR 63<br />
ROFIRE SWIVEL TORCHES 64<br />
MAPP ® & PROPANE GAS 64<br />
ROTHERM 2000 64<br />
ROTHENBERGER's professional torch equipment ensures perfectly soldered and brazed<br />
connections for plumbing, HVAC, and refrigeration. With more than 25 years of<br />
experience in this area, ROTHENBERGER stands for safety and performance.<br />
61<br />
6
6<br />
Soldering and Brazing Torches<br />
ROFIRE Hand Torch<br />
Hand torch with cyclone burner<br />
l Self-igniting piezo ignition:<br />
Immediate flame at the push of a button<br />
l Locking button:<br />
Continuous working<br />
l Fine regulating valve:<br />
Precise flame adjustment<br />
Description lb No.<br />
ROFIRE Hand Torch 0.9 35415<br />
SUPER FIRE 3 Torch 1.5 35431<br />
Pin-point burner 0.2 35455<br />
Standard burner 0.2 35456<br />
Swirl-flame burner 0.2 35457<br />
Hot-air burner 0.5 35458<br />
Soft-flame burner 0.8 35459<br />
Flame Reflector 0.2 31043<br />
62<br />
Provides fast burner exchange with a flick of the wrist.<br />
l High-performance Piezo ignition:<br />
Reliable lighting up to 30,000<br />
ignitions<br />
Hand Torch Tip Specification Chart<br />
l Trigger on/off:<br />
Lights instantly; shuts off<br />
if dropped or released<br />
Model Number 35458 Tip 35457 Tip 35456 Tip 35455 Tip 35459 Tip<br />
Description<br />
Hot air<br />
Burner<br />
Cyclone<br />
Burner<br />
Standard<br />
Burner<br />
Pinpoint<br />
Burner<br />
Soft flame<br />
Burner<br />
Automotive X X X X X<br />
Brazing X X X X<br />
Soldering X X X<br />
Maintenance & Repair X X X X<br />
Hobbyist X X X X X<br />
Specifications<br />
Head Diameter 1.5" 0.55" 0.6" 0.6" 0.95"<br />
Length 10.2" 7.3" 5.9" 5.9" 7.4"<br />
Weight 0.5 lbs 0.2 lbs 0.3 lbs 0.3 lbs 0.4 lbs<br />
BTUs* 6,500 8,500 4,800 1,700 13,650<br />
Gas Consumption per hour 0.33 0.43 0.24 0.1 0.68<br />
*BTUs are calculated using propane<br />
Works with MAP-Pro (Part No. 50012) and Propane (Part No. 50010)<br />
l Trigger guard<br />
l Locking button:<br />
Provides continuous flame<br />
for hands-free use<br />
SUPER FIRE 3<br />
HEAVY-DUTY, ergonomic, brazing torch<br />
l Fine regulating valve:<br />
Allows for precise flame<br />
adjustment<br />
The SUPER FIRE 3 premium torch is designed to provide convenience and<br />
safety to the user. The gas adjustment offers a precise flame adjustment<br />
and the swirl-flame burner tip "wraps" around the fitting for quick and<br />
even heating with MAPP ® or propane. A built in regulator gives a<br />
consistent flame in all positions, even upside down!<br />
Check out this<br />
product on YouTube!<br />
under ROTHENBERGER<br />
SUPERFIRE3 Torch<br />
l High impact fiberreinforced<br />
body<br />
l Longer skirt for stability on the bottle:<br />
this reduces thread damage<br />
31043<br />
800.545.7698 www.rothenberger-usa.com
SWEATBOX II<br />
A handy kit that includes all the tools needed to sweat copper.<br />
l SUPER FIRE 3 Heavy Duty Torch (35431)<br />
Swirl-flame burner tip<br />
Reliable Piezo ignition<br />
MAPP/propane anti-flare<br />
l 35 PRO Tube Cutter (70027)<br />
Cuts 1/4" - 1-3/8" O.D. copper<br />
Bearing designed for smooth actuation<br />
Spare cutter wheel in handle<br />
Retractable reamer<br />
l MINI MAX Tube Cutter (70015)<br />
Cuts 1/4" - 1-1/8" O.D.<br />
Compact design<br />
Smooth actuation<br />
Small working radius for confined spaces<br />
l Carry case<br />
Description lb No.<br />
SWEATBOX II 2.8 P20023<br />
SUPER FIRE 2 Heavy Duty Brazing Torch<br />
For soft and hard soldering, and other applications.<br />
l Swirl-flame "wraps" around tube<br />
Provides quick and even heating<br />
l Piezo ignition<br />
Immediate flame ignition at the push of a button<br />
l Fine regulating valve:<br />
Precise flame adjustment<br />
l Integrated constant-pressure regulator:<br />
Even pressure at all temperatures<br />
Description lb No.<br />
SUPER FIRE 2 Brazing Torch 1.5 35644X<br />
Includes Swirl Flame burner<br />
Pencil flame torch tip 0.1 35658<br />
Swirl flame torch tip 0.1 35661<br />
Flame Reflector<br />
Protects surrounding materials or walls when soldering pipes.<br />
l Mounts onto most burner tips:<br />
Nothing separate to hold or attach to pipe<br />
l Evenly heats pipe:<br />
Saves energy and time<br />
l Durable stainless steel<br />
l 2-1/2" wide<br />
Mounting<br />
Description dia. lb No.<br />
Flame Reflector 5/8" - 7/8" 0.2 31043<br />
800.545.7698 www.rothenberger-usa.com<br />
Soldering and Brazing Torches<br />
63<br />
6
6<br />
Soldering and Brazing Torches/Electric Soldering Equipment<br />
ROFIRE Swivel Torches<br />
The latest in torches, these heads swivel 360° for hard-to-reach areas.<br />
64<br />
35016<br />
ROFIRE Swivel Pro<br />
Cyclone Burner<br />
l Self Igniting<br />
l Reliable Piezo ignition switch<br />
l Cyclone burner<br />
l Targeted, efficient heat output<br />
l Fast and easy soldering<br />
Description lb No.<br />
ROFIRE Swivel PRO Cyclone 1.0 35014<br />
ROFIRE Swivel PRO Cyclone Piezo 1.0 35016<br />
ROFIRE Swivel PRO Double Barrel 1.0 35012<br />
MAPP ® and Propane Gas<br />
Special gas mix for high-performance soldering work.<br />
Description lb No.<br />
MAP-Pro 2.0 50012<br />
Propane 2.0 50010<br />
ROTHERM 2000<br />
50012<br />
Electric soft-soldering unit<br />
For simple, safe, and timesaving soft-soldering of 1/4" - 2-1/8" (6-54mm) dia.<br />
copper pipe without a flame. The ROTHERM 2000 is perfect for use in areas with<br />
a fire hazard.<br />
Performance features<br />
l Heat resistant soldering unit suitable fore building sites with high 2,000 watt<br />
heating power.<br />
l Fast, pin-point heating of soldering surface without open flame<br />
l Compact design for easy transport.<br />
10.25" L x 7.5" W x 8" H<br />
l 115V, 50/60 Hz<br />
Includes ROTHERM 2000 Soft Soldering unit, cleaning pads, internal<br />
pipe brushes, steel case<br />
Description lb No.<br />
ROTHERM 2000 soft-soldering unit 23.2 36701<br />
Accessories:<br />
Flat electrode with holders (pair) 0.3 36711<br />
Rod electrode with holders (pair) 0.3 36710<br />
Flat electrodes (pair) 0.4 36721<br />
Rod electrodes (pair) 0.1 36720<br />
Soldering paste 4.1 45225<br />
Steel case 10.9 36715<br />
35012<br />
50010<br />
l Thermal overload protection:<br />
Shuts off automatically<br />
35014<br />
ROFIRE Swivel Pro<br />
Cyclone<br />
l Reliable Piezo ignition switch<br />
l Cyclone burner<br />
l Targeted, efficient heat output<br />
l Fast and easy soldering<br />
ROFIRE Swivel Pro<br />
Double Barrel<br />
l High heat output<br />
l Cyclone burner<br />
Product Profile<br />
FEATURES<br />
l Extremely high flame temperature, utmost burning performance<br />
l Guaranteed constant top burner performance<br />
l Poses no health risks (contains no BUTADIENE)<br />
l Easy to use<br />
l Increased user safety<br />
l Longer periods of use<br />
l High performance in short<br />
amount of time:<br />
Fast return on investment<br />
No purchasing or handling<br />
of gas cylinders<br />
l Soldering without open flame:<br />
No risk of fire when near<br />
flammable wall or floor, or<br />
plastic parts<br />
l Flexible, 13 foot long cables:<br />
Provides large working<br />
radius<br />
Reaches ceiling work<br />
l Large, stainless steel cooling ribs on both<br />
shanks of the tongs:<br />
Prevents overheating of the handle<br />
800.545.7698 www.rothenberger-usa.com
ROWELD ® P 315 W<br />
Butt welding machine ø 90–315mm<br />
800.545.7698 www.rothenberger-usa.com<br />
ROWELD ®<br />
For information on the full-line of ROTHENBERGER ROWELD products,<br />
visit us at rothenberger-usa.com<br />
or contact ROWELD Hotline at 1-866-994-3610.<br />
ROWELD ® P 160 Saniline<br />
Plastic sanitary pipe welding machine<br />
from ø 40–160mm<br />
ROWELD ® P 63 S-5 Sword<br />
Socket welding Unit ø 20–63mm<br />
65<br />
7
7<br />
Notes<br />
66<br />
800.545.7698 www.rothenberger-usa.com
Pipe and Drain Inspection<br />
and Cleaning<br />
ROSCOPE ® 68<br />
Pipe and Drain Inspection Systems 69, 70<br />
ROCAM Camera Sonde Locator 71<br />
R600 Drain Cleaning Machine 72<br />
ROSPI 8 Plus Manual Drain Cleaning Unit 73<br />
Drain Cleaning Cables and Tools 73, 74<br />
ROTHENBERGER's line of pipe and drain inspection and cleaning equipment includes the<br />
ROCAM Cordless Drain Inspection Cameras in black and white or color. These cameras are<br />
the ideal tool for inspecting, locating, and documenting damage or obstructions in drains or<br />
hollow spaces.<br />
Once the problem area is found, ROTHENBERGER has a drain cleaning machine that will<br />
reach the obstruction, and eliminate it by cutting or grinding with one of our many<br />
attachment tools.<br />
67<br />
8
8<br />
Pipe & Drain Inspection Systems<br />
ROSCOPE ®<br />
Professional Hand-held Inspection<br />
Tool with 3.5" TFT color display<br />
l Taking photos is quick and easy:<br />
Date and Time optional<br />
l Easy data transfer to laptop:<br />
USB interface<br />
l 3.5" TFT Monitor color:<br />
Clear image, oil- and<br />
scratch-resistant<br />
monitor, adjusted<br />
picture<br />
68<br />
l Modular controller system with 4 modules:<br />
Multi-functional application possibilities<br />
Description lb No.<br />
l Menu- and tool-control:<br />
Multifunction buttons<br />
l Direct inspection and<br />
video playback<br />
l Direct still picture<br />
replay<br />
l Can be connected to an external<br />
display:<br />
AV Out / Mini USB interface<br />
Plumbing<br />
Product Profile<br />
FEATURES<br />
l Inspection is possible in a variety of areas<br />
l Take still photos of inspection<br />
l Fast filming of the inspection (date and time optional)<br />
l Immediate replay of the inspection<br />
l USB interface for easy data transfer to laptop<br />
l SD memory card for expandability<br />
TECHNICAL DATA<br />
• Display 3.5" TFT Display 320x240 Pixel<br />
• Battery Rechargeable Li-Polymer-accu<br />
• Video Format MPEG<br />
• Picture Format JPEG<br />
• Circuit Points Mini USB / AV Out<br />
l Continuous brightness regulation (LED):<br />
Optimal illumination<br />
l Built in expandable memory<br />
capacity:<br />
SD-card slot, 2 GB memory<br />
card included<br />
Gooseneck<br />
ROSCOPE Master Unit 2.60 69361<br />
Plumbing (Pipe Module 25 / 72 in case) 1.60 69372<br />
Industrial (Micro Module) 0.30 69376<br />
Gooseneck (TEC Module) 0.30 69364<br />
Utility (Pipe Module 20/9) 0.50 69385<br />
Accessories (hook, mirror, magnet) 10mm 0.30 69379<br />
Accessories (mirror, magnet) 5.5mm 0.30 69380<br />
Charger 0.20 69386 Utility Industrial<br />
800.545.7698 www.rothenberger-usa.com
ROCAM ® Cordless<br />
Drain Inspection Camera<br />
l On-board battery charger with<br />
charge status indicator:<br />
Battery is always charged<br />
l Easy battery disconnect:<br />
Conserves battery<br />
power (1—1.5 hour<br />
charge time)<br />
l ABS housing:<br />
Impact and<br />
splash<br />
resistant<br />
Perfect<br />
for use<br />
on building<br />
sites<br />
l Pinhole lens with<br />
LED illumination:<br />
Brilliant, clear<br />
image for easy<br />
diagnosis<br />
l Fold down monitor cover:<br />
Acts as sun visor for best<br />
viewing of image<br />
ROCAM ® Cordless models listed below include 2 guide skids,<br />
electrical adapter, cable.<br />
Description lb No.<br />
ROCAM ® Cordless color 36.0 69635NT<br />
with Transmitter and distance counter<br />
Replacement Cable 2.3 69480<br />
Replacement Battery 2.0 69550<br />
Power Supply, replacement 2.0 H88953<br />
Guide Ball 0.3 74628<br />
Recording Device 69002<br />
ROCAM ® Camera Sonde Locator 7.5 69001<br />
l New hinges feature gas shock<br />
absorbers:<br />
Cover doesn’t slam shut<br />
800.545.7698 www.rothenberger-usa.com<br />
Pipe & Drain Inspection Systems<br />
l Digital metering readout:<br />
For determining exact<br />
location of blockages<br />
Product Profile<br />
FEATURES<br />
l Flexible camera head for excellent maneuverability<br />
l One-man, single-handed device<br />
l Continuously adjustable LED brightness<br />
l Integrated storage compartment<br />
l Battery charge indicator<br />
l Recording device provided<br />
TECHNICAL DATA<br />
• For hollow spaces and drains of 2” to 6” (50 to 150 mm)<br />
• Camera head diameter 1-1/4” (33 mm)<br />
• Push cable diameter 3/16” (4.5 mm)<br />
• Push cable length 118 ft (36 m)<br />
• Main operation 110 V / 50–60 Hz or 24 V battery<br />
l Video In / Video Out:<br />
For optional video<br />
recording and playback<br />
l Rugged tubular frame acts as handle:<br />
Stable positioning on any surface<br />
Easy to carry<br />
ROCAM ® Camera Locator<br />
69001<br />
ROCAM ® Cordless Accessories<br />
ROCAM ® Guide Ball<br />
l External diameter 2-3/4" (70 mm):<br />
For centering the camera head in the pipe<br />
l Used with the push rod:<br />
Keeps camera head centered in large pipes increasing<br />
illumination and field of vision<br />
ROCAM ® Mobile Replacement Battery 24V / 1.4 Ah-NiCd<br />
l Reserve battery:<br />
Prolongs battery-powered operating time<br />
l Clicks into place:<br />
Won't fall out<br />
ROCAM ® Camera Heads<br />
l Available in black & white or color:<br />
Exchangeable modules<br />
Brilliant image resolution for sharp pictures<br />
l Automatic lighting control:<br />
No need for constant readjustment<br />
l Camera head measures only 1-5/16"<br />
(33mm) diameter:<br />
Easily maneuvers bends<br />
l Sapphire lens with edge protection:<br />
Sturdy and durable<br />
69<br />
8
8<br />
Pipe & Drain Inspection Systems<br />
ROCAM ® Plus Cordless<br />
Drain Inspection Camera<br />
l ABS housing:<br />
Impact and<br />
splash<br />
resistant<br />
Perfect for<br />
use on<br />
building<br />
sites<br />
70<br />
l On-board battery charger with<br />
charge status indicator:<br />
Battery is always charged<br />
l Easy battery disconnect:<br />
Conserves battery<br />
power<br />
l Fold down monitor cover:<br />
Acts as sun visor for best viewing<br />
of image<br />
l Pinhole lens with LED illumination:<br />
Brilliant, clear image for easy<br />
diagnosis<br />
ROCAM ® Plus Cordless model listed below includes 2 guide skids,<br />
electrical adapter, mini module, cable.<br />
l New hinges feature gas shock absorbers:<br />
Cover doesn’t slam shut<br />
Description lb No.<br />
ROCAM ® Plus Cordless color 325' 61.5 69825NT<br />
with Transmitter and distance counter<br />
Replacement Cable 2.3 H82460<br />
Replacement Head 0.65 69701NT<br />
Transmitter 1.0 69850<br />
Replacement Battery 1.6 69570<br />
Charger 2.3 69120<br />
Recording Device 69002<br />
ROCAM ® Camera Sonde Locator 7.5 69001<br />
ROCAM ® Plus Replacement Battery<br />
l 12 V high-performance battery:<br />
For flexible use<br />
l Up to 2.5 hours operating time<br />
Product Profile<br />
FEATURES<br />
l Compact all-in-one unit<br />
l Transmitter for problem location<br />
l Heavy-duty flexible, reinforced push cable<br />
l Sturdy, splash-proof ABS housing<br />
l Video in/out for optional recording and playback<br />
l Standard on-screen distance counter<br />
l Self-leveling head<br />
l Recording device provided<br />
TECHNICAL DATA<br />
• For hollow spaces and drains of 2" to 12" (50 to 300 mm)<br />
• Camera head diameter 1.57" (40 mm)<br />
• Push cable diameter 5/16" (7.5 mm)<br />
• Push cable length 320 ft (100 m)<br />
• Main operation 110 V / 50–60 Hz or 12 V battery<br />
l Digital metering readout:<br />
For determining exact<br />
location of blockages<br />
l Video In / Video Out:<br />
For optional video<br />
recording and playback<br />
l Rugged tubular frame acts as handle:<br />
Stable positioning on any surface<br />
Easy to carry<br />
ROCAM ® Camera Locator<br />
69001<br />
Description lb No.<br />
ROCAM ® Plus Battery 1.6 69570<br />
Replacement Battery Charger 69120<br />
Replacement Lens Assembly H82402<br />
800.545.7698 www.rothenberger-usa.com
ROCAM ® Camera Sonde Locator<br />
For use with <strong>Rothenberger</strong> ROCAM ® Cameras<br />
Whether locating water lines, sewer lines, inspection cameras or sondes, this<br />
is an economical and de-pendable locator for companies of all sizes.<br />
Multi-functional capability allows user to locate live power lines without the<br />
use of a transmitter.<br />
l Frequency<br />
indicator<br />
l On/Off Button<br />
l Measures depth<br />
800.545.7698 www.rothenberger-usa.com<br />
Drain Cleaning Equipment and Cables<br />
l Displays absolute<br />
signal strength or<br />
depth<br />
l Selects frequency<br />
l Adjusts gain up or down or sets optimum<br />
gain when signal is off:<br />
Bargraph scale<br />
l Relative signal strength bargraph:<br />
Single bar shows gain setting<br />
Product Profile<br />
FEATURES<br />
l Active frequencies of 512 Hz and 33 kHz allow accurate tracing of sondes,<br />
pipe cameras with transmitters<br />
l 50/60 Hz frequency locates live utilities without the use of a transmitter<br />
l Backlit digital display for low-light reading<br />
l Push-button depth accurate up to 15 feet<br />
l Locate sondes up to 10 feet in cast iron<br />
l Weather proof membrane buttons<br />
l Made in the U.S.A.<br />
TECHNICAL DATA<br />
• Input Frequency 512 Hz, 33 kHz, 50/60 Hz, RF RF<br />
• RF Frequency Range 14 kHz to 30 kHz<br />
• Antenna Mode Peak, pin-point peak, and null<br />
• Display Indicators Backlit LCD bar graph, low battery,<br />
signal strength, mode and function<br />
indicators<br />
• Audio Indication Variable pitch response<br />
• Current Measurement Display indicates relative current<br />
• Power Source 6 Disposable, “C” batteries<br />
• Battery Life Continuous: 40 hours;<br />
Intermittent: 82 hours<br />
• Signal Strength LCD bar graph, absolute signal<br />
strength readout<br />
• Gain Control Up/down for automatic centering<br />
and manual<br />
• Dynamic Range 126 dB Depth<br />
• Depth Measurement Push-button readout to 15 feet or<br />
manual triangulation method<br />
• Operating Temperature -4º F to +133º F (-20ºC to +55º C)<br />
• Size 30.3” x 9.4” (77 cm x 24 cm)<br />
• Weight 3 lbs (1.36 kg)<br />
Description lb No.<br />
ROCAM ® Camera Sonde Locator 7.5 69001<br />
71<br />
8
8<br />
Drain Cleaning Equipment<br />
110/115V<br />
Description lb 50/60 Hz<br />
R 600V machine with guide hose 46.0 72869V<br />
R 600 with accessories 105.0 72676<br />
Includes: 5 x cables 7/8" dia. (72441),<br />
cable basket (72112), guide hose (72541),<br />
guide glove (72120), separating pin (72101),<br />
straight auger (72221), bulb auger (72263),<br />
spade head cutter (72261), funnel auger (72222),<br />
serrated forked cutter (72250)<br />
72<br />
Product Profile<br />
l Reinforced guide hose sheathing with precision quick coupling:<br />
Safe, kink-free cable feed; prevents dirt ingress<br />
l Die-cast aluminum frame and fiberglass reinforced side panels:<br />
Extremely light and sturdy<br />
l Clamping device:<br />
For secure lengthening/shortening of cables<br />
l Lockable drive lever:<br />
Serves as carrying handle<br />
l Optional tri-pod stand:<br />
Provides safe, non-slip, higher position of machine when working on<br />
toilets and inspection holes<br />
• Cable size with direct take-up: 7/8” (22 mm) and 5/8” (16 mm)<br />
• For pipe sizes: 3/4” - 6” (20 - 150 mm) dia.<br />
• Maximum working length: 200 ft. (61 m) with 7/8” cables<br />
165 ft. (50 m) with 5/8” cables<br />
• Rating: 0.4 kW (0.55 HP)<br />
RH and LH drive<br />
• Speed: 467 rpm<br />
72541<br />
72120, 72121<br />
FEATURES<br />
TECHNICAL DATA<br />
Cables sold separately<br />
58182<br />
72112<br />
R600<br />
Drain Cleaning Machine<br />
For pipes 3/4" - 6" diameter, the R600 is ideal for installation and<br />
maintenance work in hospitals and municipal buildings.<br />
l Patented CENTER-LOCK<br />
cable clutch system<br />
Safe and powerful<br />
transmission to the<br />
cable<br />
l Locking drive lever<br />
Serves as carrying<br />
handle<br />
Accessories for R600 lb No.<br />
Guide Hose, 13 ft. 6.0 72541<br />
Clutch Jaws with springs, R600 2.0 72638<br />
Tri-pod Stand, collapsible 16.5 58182<br />
Separating Pin for 7/8” and 1-1/4” cables/tools 0.1 72101<br />
Cable Basket for 7/8” cables, 74 max ft. 3.6 72112<br />
Cable Guide Glove, left 0.5 72120<br />
Cable Guide Glove, right 0.5 72121<br />
Cable, 7/8" dia., 15' 9.5 72441<br />
800.545.7698 www.rothenberger-usa.com
ROSPI 8 PLUS<br />
Manual and electric drain cleaning unit<br />
For use with hex drive on conventional power drill or by hand with<br />
attached handle<br />
l Flexible, 5/16" x 25' cable with integrated bulb auger:<br />
Removes contamination from hard-to-reach places<br />
l Impact-resistant, enclosed snake container:<br />
Protects cable from dirt<br />
l Works in tight bends:<br />
No need to dismantle sink strainers or siphons<br />
Description lb No.<br />
ROSPI 8 PLUS 5.5 72095<br />
Cable, replacement, 5/8" x 25 ft. 4.5 72412<br />
72111<br />
72110<br />
Cables sold separately<br />
72112<br />
Serrated Forked Cutter<br />
l Lock Rings:<br />
Flexible, self-binding<br />
material<br />
l Universal tool for sludge deposits and roots<br />
l Hardened spring steel with teeth on both sides 72250<br />
Coupling dia. Working range No.<br />
lb<br />
7/8" 3" 4" 4" - 6" 0.6 72250<br />
1-1/4" 4" 4" 4-3/4" - 8" 0.6 72350<br />
800.545.7698 www.rothenberger-usa.com<br />
Drain Cleaning Equipment and Cables / Tools<br />
Standard Cables & Baskets<br />
l Flexible<br />
l For general cleaning with normal loading and short distances<br />
l Easy operation in tight bends or a succession of pipe bends<br />
l Includes patented lock-ring technology<br />
R/K<br />
Description ft Type lb No.<br />
Drain Cleaning Cable, 5/8" 7.5 C 8 2.4 72431<br />
Drain Cleaning Cable, 7/8" 15 C 10 8.8 72441<br />
Drain Cleaning Cable, 1-1/4" 15 C 11 13.9 72451<br />
Cable Basket for 5/8" cables, 113 max ft. 2.9 72110<br />
Cable Basket for 1-1/4" cables, 59 max ft. 5.1 72111<br />
Cable Basket for 7/8" cables, 74 max ft. 3.6 72112<br />
ROTHENBERGER Lock Ring<br />
One-of-a-kind safety ring for the optimum transmission of the torque<br />
pressure onto the coupling with 100% surface pressure<br />
l Increased safety<br />
l Increased durability/service life of the spiral<br />
l Patent Pending<br />
Two-way Root Cutter<br />
Drain Cleaning Tools<br />
l For chopping up roots and solid materials<br />
l Hardened spring steel with teeth on front and back:<br />
Cuts in both directions<br />
72265<br />
Coupling dia. Working range No.<br />
lb<br />
7/8" 2-1/2" 3-1/8" 3" - 4" 0.6 72265<br />
1-1/4" 2-1/2" 3-1/8" 3" - 4" 0.7 72365<br />
73<br />
8
8<br />
Drain Cleaning Tools<br />
Cross-blade Cutter, Serrated<br />
l Powerful tool with hardened, break-proof, steel blades<br />
l Use for textile or sludge obstructions and coarse<br />
removal of encrustations<br />
l Use as preparatory tool for chain spinning<br />
Recommended for use with SMK cables<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1" 1-3/8" 1-1/2" - 3" 0.1 72175<br />
7/8" 1-3/4" 2-3/8" 2-3/4" - 4" 0.2 72275<br />
1-1/4" 1-3/4" 2-3/8" 2-3/4" - 4-1/8" 0.4 72374<br />
Chain-spinning Heads with Spikes<br />
l Without ring:<br />
Improved maneuvering in pipe bends<br />
l Intensive cleaning action:<br />
Reduces risk of renewed obstructions<br />
Ideal for final cleaning of pipe<br />
l For concrete and cast iron pipes<br />
Retrieving Auger<br />
l Specially designed tool with a claw<br />
for retrieving textiles, tools, cables, etc.<br />
74<br />
72278<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1-1/8" 6-1/8" 2" - 5" 0.4 72186<br />
7/8" 2" 6-5/8" 2-3/4" - 5" 1.9 72278<br />
1-1/4" 2-3/4" 8-5/8" 3-1/2" - 5-1/2" 3.0 72347<br />
Spiral Sawtooth Cutter<br />
l Special tool for chopping up small roots, branches,<br />
and other materials<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1-3/4" 1" 2" - 3" 0.1 72166<br />
7/8" 1-3/4" 1-9/16" 3" - 4" 0.3 72229<br />
1-1/4" 2-1/2" 2-1/8" 3" - 4" 0.5 72329<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1-3/8" 2-1/8" 2" - 3" 0.1 72162<br />
7/8" 1-3/4" 4" 3" - 6" 0.3 72203<br />
1-1/4" 2-1/2" 5" 3" - 10" 0.6 72325<br />
Spade-head Cutter<br />
l Special curved tool for silt and sludge deposits<br />
Coupling dia. Working range No.<br />
lb<br />
7/8" 2-1/2" 2-1/2" 4" - 6" 0.4 72261<br />
1-1/4" 2-1/2" 2-3/4" 4" - 6" 0.6 72360<br />
Grease Cutter<br />
l Standard tool for removing grease and other soft<br />
deposits, such as soap accumulations<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1" 1-3/8" 1-1/2" - 3" 0.1 72169<br />
5/8" 1-3/8" 1-3/4" 2" - 3" 0.1 72170<br />
7/8" 1-3/4" 2-3/8" 2-3/8" - 5" 0.2 72234<br />
Straight Auger<br />
l Standard tool for establishing the nature<br />
of an obstruction in order to determine<br />
suitable cleaning tool<br />
l For snagging or drilling through obstructions caused by textiles,<br />
paper, cellulose materials, kitchen refuse, etc.<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 5/8" 4-3/8" 1" - 3" 0.2 72161<br />
7/8" 7/8" 8-1/4" 2" - 4" 0.4 72221<br />
1-1/4" 1-1/4" 8-5/8" 3" - 10" 0.8 72321<br />
Bulb Auger<br />
l Specially designed for small pipes, and drains with multiple bends<br />
l Standard, highly flexible tool for clearing light textile & paper<br />
obstructions<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1-1/8" 4-1/2" 1-1/2" - 3" 0.2 72163<br />
7/8" 1-9/16" 7" 2" - 4" 0.5 72263<br />
1-1/4" 2" 8-5/8" 3" - 10" 0.1 72363<br />
Carbide-tipped Cutters<br />
Carbide-tipped blades<br />
l Blades are carbide tipped:<br />
Clears hardest obstructions and encrustations<br />
such as cement deposits, urine<br />
and water scale<br />
l Blades are securely mounted to tool body:<br />
Long service life<br />
l Recommended for use with S or SMK cables<br />
72291<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1" 1-3/8" - 2" 0.2 72191<br />
7/8" 1-3/16" 2" - 3" 0.2 72291<br />
1-1/4" 1-3/4" 2-3/8" - 4" 0.6 72392<br />
Funnel Auger<br />
l Large grab capacity can also be used<br />
to retrieve cables<br />
l For removing or opening up<br />
obstructions caused by textiles<br />
or paper.<br />
Coupling dia. Working range No.<br />
lb<br />
5/8" 1-1/4" 4-3/8" 2" - 4" 0.2 72165<br />
7/8" 2-1/8" 7-1/4" 4" - 6" 0.7 72222<br />
1-1/4" 2-3/8" 7-5/8" 4" - 10" 1.2 72322<br />
800.545.7698 www.rothenberger-usa.com
Greenlee<br />
Hand Tools 76 – 80<br />
Hole Making 80 – 86<br />
Bending 87<br />
Fishing 88<br />
Testing & Measurement 89 – 91<br />
Storage 92 – 93<br />
Tools, Testers, and Related Accessories from Greenlee for the Plumbing Market<br />
9<br />
75
9<br />
Hand Tools<br />
High Leverage Side-cutting Pliers, 9" dipped grip<br />
Specifications<br />
Overall Length: 9-3/8" (23.8 cm)<br />
l Double layered vinyl handles for comfort and slip resistance<br />
l Handles allow for easy storage of tools in pouches and tool bags<br />
l High leverage pliers design and diamond-serrated jaws for optimum cutting and<br />
gripping performance<br />
l Forged from chrome vanadium steel for greater durability and strength<br />
l Precision-machined and induction-hardened blades strengthen cutters and<br />
provide consistent performance<br />
l Effectively cuts hardened wire, ACSR, bolts, screws and nails<br />
l Through-hardened steel for longer life<br />
High Leverage Diagonal Cutting Pliers 8" dipped grip<br />
76<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
0151-09SD<br />
l Note: This is not an insulated tool<br />
Description lb No.<br />
High Leverage Side-cutting Pliers, 9" dipped grip 1.13 0151-09SD<br />
Specifications<br />
Overall Length: 8-3/4" (22.2 cm)<br />
l Custom grip allows area for user identification<br />
l Flared handles for added comfort and leverage<br />
l Wider grip design provides larger load bearing area for user comfort<br />
l Forged from chrome vanadium steel for greater durability and strength<br />
0251-08D<br />
l Precision-machined and induction-hardened blades strengthen cutters and<br />
provide consistent performance<br />
l Effectively cuts most hardened wire, ACSR, bolts, screws and nails<br />
l Note: This is not an insulated tool<br />
l Through-hardened steel for longer life<br />
l Dual cutting edges for optimum cutting performance<br />
Description lb No.<br />
l Rugged riveted construction for smooth precise action<br />
High Leverage Diagonal Cutting Pliers 8" dipped grip 0.85 0251-08D<br />
Long Nose Pliers/Side Cutting 8" dipped grip<br />
Specifications<br />
Overall Length: 8-9/16" (21.7 cm)<br />
l Double layered vinyl handles for comfort and slip resistance<br />
l Handles allow for easy storage of tools in pouches and tool bags<br />
l Wider grip design provides larger load bearing area<br />
l Forged from chrome vanadium steel for greater durability and strength<br />
0351-08D<br />
l Effectively cuts both solid & stranded copper wire<br />
l Diamond-serrated jaws and hardened cutting edges for optimum cutting and<br />
gripping performance<br />
l Through-hardened steel for longer life<br />
l Exceeds ASME/ANSI specifications<br />
l Note: This is not an insulated tool<br />
l Rugged riveted construction for smooth precise action<br />
Description lb No.<br />
l Lifetime limited warranty<br />
Long Nose Pliers/Side Cutting 8" dipped grip 0.64 0351-08D<br />
Pump Pliers<br />
Specifications<br />
Overall Length: 10"(25.4 cm)<br />
Adjustment Grooves: 7<br />
Jaw Capacity: 2"(5.1 cm)<br />
l Slip-proof, ergonomic molded grip for increased comfort and reduced user<br />
fatigue<br />
0451-10M<br />
l Wider grip design provides larger load bearing areas<br />
l Precision-machined and through-hardened for consistent performance and<br />
longer life<br />
l Note: This is not an insulated tool<br />
l Right-angled teeth for gripping in both directions<br />
Description lb No.<br />
l Riveted process ensures joint integrity<br />
l Exceeds ASME/ANSI specifications<br />
l Lifetime limited warranty<br />
Pump Pliers, 10" molded grip 0.83 0451-10M<br />
Pump Pliers, 12" molded grip 1.29 0451-12M<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
0153-01C<br />
Description lb No.<br />
5-Piece Screwdriver Set 1.38 0153-01C<br />
7-Piece Screwdriver Set 1.63 0153-02C<br />
0153-42C<br />
Description lb No.<br />
6-in-1 Multi-tool 0.42 0153-42C<br />
0354-01<br />
Description lb No.<br />
7-Piece Combination Ratcheting Wrench Set 1.25 0354-01<br />
Utility Knife<br />
l Over-molded for secure, comfortable grip<br />
l Retractable three-position blade for safety and convenience<br />
l Easy front-loading design provides for quick blade change<br />
l Blade storage in pop-up holder<br />
l Packaged with three heavy-duty patented serrated blades<br />
l Note: This is not an insulated tool<br />
800.545.7698 www.rothenberger-usa.com<br />
5- or 7-Piece Screwdriver Set<br />
Hand Tools<br />
5-Piece Set contains: 3/16” x 6” Cabinet, 1/4” x 4” Keystone, 1/4” x 6” Cabinet,<br />
5/16” x 6” Keystone & #2 x 4” Phillips<br />
7-Piece Set contains: 3/16" x 4" Cabinet, 3/16" x 6" Cabinet, 1/4" x 4" Keystone,<br />
1/4" x 4"<br />
l Heavy-duty construction for longer life<br />
l Precision-machined tips for accurate fastener contact<br />
l Strong, durable black phosphate tips prevent plate chipping and reduce slipping<br />
l High-grade, rust resistant, chrome-plated finish<br />
l Soft, cushioned grip for extra comfort and torque<br />
l Painted handle end allows for easy identification of screwdriver type<br />
l Meets or exceeds ANSI standards<br />
l Lifetime limited warranty<br />
l Note: This is not an insulated tool<br />
6-in-1 Multi-tool<br />
Contains: 3/16" & 1/4" Flat-Tip, #1 and #2 Phillips and 5/16" & 1/4" Hex<br />
l High-quality bits for longer life<br />
l High-grade, rust resistant, chrome-plated finish<br />
l Soft, cushioned grip for extra comfort and torque<br />
l Lifetime limited warranty<br />
l Note: This is not an insulated tool<br />
7-Piece Combination Ratcheting Wrench Set<br />
Set contains: sizes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" & 5/8"<br />
l “Five-degree” ratcheting design for versatility and ease of use in tight spaces<br />
l Polished chrome finish for superior corrosion resistance<br />
l Precision heads for accurate fastener fit<br />
l Hardened for durability and longer life<br />
l Meets or exceeds ANSI standards<br />
l Lifetime guarantee<br />
l Note: This is not an insulated tool<br />
0652-11<br />
Description lb No.<br />
Utility Knife 0.44 0652-11<br />
77<br />
9
9<br />
Hand Tools<br />
Tape Measure<br />
l Compact housing fits easily in the hand and pouch<br />
l Easy to use Click Lock holds tape securely without moving the blade<br />
l Tough ABS case is over-molded with TPR for added protection<br />
l Stainless steel side panels<br />
l Double sided tape with double foot can be read from above or below<br />
l Rigid 1" wide blade on all models<br />
l Abrasion resistant nylon coated hardened steel blade<br />
l Four rivets on foot resist pull-off, adjust for inside and outside readings<br />
l 16" and 19.2" stud markings<br />
78<br />
l Note: This is not an insulated tool<br />
16 oz. Straight Claw Hammer<br />
l Universal design perfect for a variety of applications<br />
l Lightweight, durable fiberglass handle for shock resistance<br />
l Cushioned grip and flared handle end for user comfort and to reduce<br />
slipping<br />
l Exceeds ASME/ANSI specifications<br />
l Lifetime limited warranty<br />
l Note: This is not an insulated tool<br />
Pocket-light Flashlight<br />
l High intensity Xenon fired lamp<br />
l Luminous tip so flashlight can be located in the dark<br />
l Lifetime limited warranty<br />
l Submersible to 500 feet<br />
l Dust and rust proof<br />
l Batteries included<br />
Flexible LED Flashlight<br />
l Small 9/32" head will illuminate tight spaces other flashlights cannot<br />
l 16" flexible PVC coated cable will bend and hold the desired state<br />
l Runs up to 100 hours on two AA batteries (batteries are included)<br />
l Rugged white LED light source lasts over 50,000 hours<br />
l Anodized aluminum housing with push-button ON/OFF switch on tail-cap<br />
Description lb No.<br />
Flexible LED Flashlight 0.33 10220<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
0155-25A<br />
0155-16A<br />
Description lb No.<br />
Tape Measure, 25' 0.89 0155-25A<br />
Tape Measure, 16' 0.64 0155-16A<br />
0156-12<br />
Description lb No.<br />
16 oz. Straight Claw Hammer 1.57 0156-12<br />
46500<br />
Description lb No.<br />
Pocket-light Flashlight 0.44 46500<br />
10220<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
High Dexterity Gloves<br />
l Tough, soft and comfortable to wear–resists shrinking, stretching and<br />
hardening<br />
l Wing closing wrist strap for perfect adjustments, keeping debris out and<br />
easy-on/easy-off<br />
l Stretch fabric for flexibility and fit with padded knuckles<br />
l Textured palm pads for better grip, extra wear and added durability<br />
l Thumb design for better flexibility and Lycra side panels for improved<br />
dexterity<br />
l Terry cloth thumb to remove sweat or debris from face<br />
301A<br />
322-013<br />
333A<br />
800.545.7698 www.rothenberger-usa.com<br />
Keyhole Saw<br />
0358-11L<br />
Hand Tools<br />
Description lb No.<br />
High Dexterity Gloves, size L 0.20 0358-11L<br />
l Ergonomic style handle with non-slip grip creates a sure and comfortable feel<br />
l Hardened steel blade makes cutting drywall, cement board, plastic and wood quick<br />
and easy<br />
l Blade goes through the handle for maximum support of the cutting blade<br />
Description No.<br />
Keyhole Saw with 6" blade (152mm) 301A<br />
PVC Saws<br />
l “V” tooth design enables straight cuts on both push and pull saw strokes<br />
l Resharpenable blade<br />
l Pointed blade nose makes drywall surface penetration easy<br />
l Ergonomic handle is interchangeable with most popular PVC saw brands<br />
Description No.<br />
PVC Saw, 13" (330mm) 322-013<br />
PVC Saw, 18" (457mm) 322-018<br />
Blade for 00113 322-113<br />
Blade for 00114 322-118<br />
12" Heavy Duty Hacksaw<br />
l Over-molded rugged design for heavy-duty use and comfort<br />
l Fully-adjustable blade tension up to 30,000 psi for longer blade life and faster,<br />
accurate cuts<br />
l Alternative 45 degree blade mounting allows for flush cutting<br />
l Mounting for most reciprocating saw blades for extra versatility<br />
l Handy blade storage in tubular frame<br />
l Convenient front grip feature for two-handed sawing<br />
l Complete with bi-metal blade (12"/24 TPI)<br />
l Lifetime limited warranty<br />
Description lb No.<br />
12" Heavy Duty Hack Saw 2.15 333A<br />
79<br />
9
9<br />
Hand Tools / Hole Making<br />
Levels<br />
l Professional grade levels<br />
l Three rare-earth magnets provide superior<br />
holding strength<br />
l Four vial design - 0°, 90°, 45°, and 30°<br />
l Machined from aluminum alloy and anodized<br />
to aircraft standards<br />
l Compact size fits easily in tool pouch<br />
Specifications: (L107)<br />
Overall Length: 8-1/2" (21.6 cm)<br />
Width: 3/4" (1.9 cm)<br />
Height: 1-1/4" (3.2 cm)<br />
Slug-Splitter SC (Self-Centering)<br />
Knockout Punches<br />
l Slug-Splitter SC heavy-duty punches are designed to punch up<br />
through 10 gauge (3.5mm) stainless steel<br />
l Self-centering punch aligns itself on pilot hole (Slug-Splitter SC)<br />
l Designed for stainless steel applications<br />
l Unique slug-splitting design and tool steel construction easily punch<br />
to gauge (3.5mm) mild steel and stainless steel<br />
l Unique punch profile also splits slugs for easier slug removal<br />
Description dia. No.<br />
Slug-Splitter SC Knockout punch 1/2" 28154<br />
Slug-Splitter SC Knockout punch 3/4" 28156<br />
Slug-Splitter SC Knockout punch 1" 28158<br />
Slug-Splitter SC Knockout punch 1-1/4" 28160<br />
80<br />
Specifications: (L77)<br />
Overall Length: 5-1/2" (140 mm)<br />
Width: 3/4" (19 mm)<br />
Height: 1-1/2" (38 mm)<br />
Crimping/Stripping Combination Tool<br />
l Narrow nose for getting into tight boxes<br />
l Wire looping holes in jaw<br />
l Screw cutting stations are collapsed around the pivot - 20% less force is<br />
required<br />
l Machined stripping stations with a positive stop provide precise stripping<br />
diameters<br />
l Long curved cutter blades reduce force required by 25% and can cut<br />
NM in single cut<br />
l Smooth, rounded pivot bolt won't catch in tool pouch or on other tools<br />
l Easy-to-read graphics<br />
l Comfortable, cushioned grips<br />
1923<br />
Aviation Snips<br />
l Precision ground chrome moly steel blades<br />
provide smooth cutting action<br />
l Auto release latch for one handed<br />
operation<br />
l Cuts up to 18-gauge (1.2mm) cold-rolled<br />
steel or 24-gauge (0.7mm) 304 stainless<br />
steel<br />
l Meets ANSI/ASTM B107.16-1998<br />
specification<br />
1927<br />
0653-0L (Left Cut)<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
L77 L107<br />
Description lb No.<br />
Mini Magnetic Bubble Level 0.22 L77<br />
Torpedo Level 0.34 L107<br />
1923 Specifications<br />
Strips: 8-18 AWG solid, 10-22 AWG stranded<br />
Crimps: 10-22 AWG insulated and non-insulated terminals<br />
Cuts: #4-40, #6-32, #8-32, #10-24 and #10-32 screws<br />
Length: 8-1/2" (216 mm)<br />
1927 Specifications<br />
Strips: 10-22 AWG solid and stranded<br />
Crimps: 10-22 AWG insulated and non-insulated terminals<br />
Cuts: #4-40, #5-40, #6-32, #8-32, #10-24 and #10-32 screws<br />
Length: 8-1/8" (206 mm)<br />
Description No.<br />
Crimping/Stripping Combination Tool 1923<br />
Crimping/Stripping Combination Tool 1927<br />
0653-0R (Right Cut)<br />
0653-0S (Straight Cut)<br />
Description No.<br />
Left Cut Aviation Snips 0653-01L<br />
Right Cut Aviation Snips 0653-01R<br />
Straight Cut Aviation Snips 0653-01S<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
709<br />
7238SB<br />
7310SB<br />
800.545.7698 www.rothenberger-usa.com<br />
Slug-Buster ® Knockout Kit with<br />
Ratchet Wrench<br />
Hole Making<br />
l 1" Hex Ratchet Wrench allows use with both 3/8" (9.5mm) and 3/4"<br />
(19.1mm) draw studs<br />
l High-impact, rugged plastic carrying case<br />
Description lb No.<br />
Slug-Buster ® Knockout Kit with Ratchet Wrench 10 7238SB<br />
Ram and Hand Pump Hydraulic Driver Kit<br />
l Fast, easy and simple to operate<br />
l Compact design for field use on construction sites and maintenance jobs<br />
l Punches 10 times faster than wrench method<br />
l Will also drive 751 Cable Cutter head<br />
l Can be used with all standard round, Slug-Buster ® and Slug-Splitter SE punch<br />
sizes<br />
l Can be used with non-round punches (adapter may be required)<br />
l 3-foot hose<br />
l Powerful 11-ton hydraulic ram<br />
Description lb No.<br />
Ram and Hand Pump Hydraulic Driver Kit 24.5 7310SB<br />
Driver, Hand Pump, Slug-Buster ® Punches, Dies and Draw Studs<br />
for 1/2" through 2" and 2-1/2" through 4" Standard Conduit<br />
Size Punches, Dies and Draw Studs, Adapter, Spacers, Kwik<br />
Stepper ® Step Bit and Steel Case<br />
2-5/8" Diameter Plumber Stud Punch<br />
Punches 2-5/8" (66.7mm) diameter hole in metal studs for<br />
professional-looking installation of 2" water, vent, waste pipes<br />
l Two-speed lever action for fast, easy punching of 24 to 20 gauge<br />
thick metal studs<br />
l 2-1/8" (54mm) throat width fits over most studs and channels<br />
l High strength alloy aluminum c-frame and handle provides<br />
lightweight tool for easy handling<br />
l Lever action punch retraction strips punch out of metal stud fast and<br />
easy<br />
Description lb No.<br />
Plumber Stud Punch 10.60 713<br />
Metal Stud Punches<br />
l Punch up through 20 gauge (0.9mm) steel studs in one stroke<br />
l Aluminum head provides strength with minimum weight, reducing<br />
operator fatigue<br />
l Contoured handle design gives better operator leverage and makes it<br />
possible to punch in tight spaces<br />
l Self-stripping design eliminates punch hang-ups<br />
l Automatically centers holes on standard studs<br />
l Conversion kit available to upgrade early models form 24 gauge to 20<br />
gauge maximum capacity<br />
Description lb No.<br />
Metal Stud Punch, 7/8" (22.2mm) diameter 7.0 709<br />
Metal Stud Punch, 1-11/32" (34.1mm) diameter 7.5 710<br />
81<br />
9
9<br />
Hole Making<br />
6-32 to 1/4-20 6-Piece Drill Tap Kit<br />
l Complete hole drilling, tapping and deburring/countersinking in one<br />
operation with power drill saves labor and time<br />
l Back tapered beyond tap to prevent thread damage from over-drilling<br />
l Deburr/countersink also provided on bit beyond back taper<br />
l Made from hardened high-speed steel vs. carbon steel for longer life<br />
l High quality hex shank to ensure strong connection to drill chuck<br />
l Designed to tap up to 10-gauge metal<br />
l Quick change adaptor included in both metric and standard kits<br />
Description No.<br />
6-Piece Drill Tap Kit DTAPKIT<br />
Kwik Stepper ® Step Bit Kit<br />
Kit includes: 1/2" (34401), 7/8" (34403), and 1-1/8" (30008) multi-hole step<br />
bits , plastic case (35936)<br />
Hole Sizes: From 1/8" through 1-3/8" (3.2 - 34.9 mm)<br />
Capacity: Cut up through 3/8" (9.5 mm) mild steel, copper, brass, aluminum,<br />
wood, plastic and laminates<br />
l Unique split tip design penetrates through steel faster<br />
l Resists walking or skidding, even on round surfaces<br />
l Balanced, double-flute construction requires less pressure, does the work<br />
for you<br />
l Designed and manufactured in USA<br />
Nail Eater II ® Wood<br />
Boring Bits<br />
l Improved cutting edge provides 30%<br />
longer life span<br />
l Patented new design for improved<br />
cutting and cleaner holes<br />
l Self-feeding screw point draws bit<br />
through wood<br />
l Unique patented design cutting angle -<br />
smoother starts, reduced cutting loads<br />
l Made of super tough, heat-treated steel;<br />
cuts through nails and provides longer life<br />
l “Shorty” bits - for working in tight<br />
places, yet still can go through three<br />
abutting 2 x 4s<br />
l For more length, use Bit Extensions (see<br />
chart)<br />
82<br />
61PTS<br />
901-12<br />
904H-18<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
DTAPKIT<br />
35884<br />
Description No.<br />
Kwik Stepper ® Step Bit Kit 35884<br />
1-1/8" Electrician's Step Bit 30008<br />
1/2" Multi-Hole Step Bit 34401<br />
7/8" Multi-Hole Step Bit 34403<br />
Plastic Case 35936<br />
Description lb No.<br />
5/8" Shorty Wood Boring Bit 0.30 61PTS-5/8<br />
3/4" Shorty Wood Boring Bit 0.40 61PTS-3/4<br />
7/8" Shorty Wood Boring Bit 0.50 61PTS-7/8<br />
1" Shorty Wood Boring Bit 0.80 61PTS-1<br />
3/4" Big Shank Shorty Wood Boring Bit 0.50 62PTS-3/4<br />
7/8" Big Shank Shorty Wood Boring Bit 0.60 62PTS-7/8<br />
1" Big Shank Shorty Wood Boring Bit 0.70 62PTS-1<br />
1-1/8" Big Shank Shorty Wood Boring Bit 0.90 61/62PTS-1-1/8<br />
1-1/4" Big Shank Shorty Wood Boring Bit 1.10 61/62PTS-1-1/4<br />
3/4" Wood Boring Bit 1.20 66PT-3/4<br />
7/8" Wood Boring Bit 1.50 66PT-7/8<br />
1" Wood Boring Bit 1.80 66PT-1<br />
1-1/8" Wood Boring Bit 2.30 66PT-1-1/8<br />
1-1/4" Wood Boring Bit 1.20 66PT-1-1/4<br />
Bit Extension, 12" 1.40 901-12<br />
Bit Extension, 18" 4.30 904H-18<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
E-Z Bore ® Conduit and<br />
Pipe Bit Set<br />
l Complete assortment of the most<br />
commonly used E-Z Bore ® bits<br />
l High-impact, rugged plastic<br />
carrying case<br />
l Full complement of accessories<br />
conveniently stored<br />
Spade Bit Kit<br />
149H<br />
Spade Bit Kit Includes: 33A-3/8 , 33A-1/2 , 33A-5/8 , 33A-3/4 , 33A-<br />
7/8 , 33A-1<br />
l Bore hardwood, softwood, plywood and drywall<br />
l Forged and heat treated for long life<br />
l Hole in top center of bit for wire pulling<br />
l P.O.P. packaged<br />
Description No.<br />
Spade Bit Kit 33AR-6<br />
D‘VersiBIT ® Starter Kit<br />
l All the tools to complete a typical wiring job. Includes step bit (09-03-54B),<br />
placement tool (712P) and pulling grip (150Q)<br />
l 1" (25.4mm) Hex ratchet wrench allows use with both 3/8" (9.5mm) and<br />
3/4" (19.1mm) draw studs<br />
l 12.7mm Kwik Stepper ® step bit included<br />
l Plastic carrying case included<br />
Description No.<br />
DVersiBIT Starter Kit DBITKIT<br />
Step bit 09-03-54B<br />
Placement tool 712P<br />
Pulling grip 150Q<br />
D‘VersiBIT ® System Type A Auger<br />
l Wood-type auger bit with screw point<br />
l Pulls itself through wood, avoids walking or skidding<br />
l Excellent for drilling in soft woods or through thin sections<br />
l Slow back-taper allows for easy retrieval<br />
Description No.<br />
3/4" Type A Auger Bit 12-04-54A<br />
1" Type A Auger Bit 16-04-54A<br />
D'VersiBIT ® 1/4" x 54" Bit Extension 4XT-54<br />
800.545.7698 www.rothenberger-usa.com<br />
Hole Making<br />
Description lb No.<br />
EZ Bore ® Conduit and Pipe Bit Set 6.0 149H<br />
1" E-Z Bore Bit 0.40 149H-1<br />
1-1/8" E-Z Bore Bit 0.30 149H-1-1/8<br />
1-1/4" E-Z Bore Bit 0.30 149H-1-1/4<br />
1-3/8" E-Z Bore Bit 0.40 149H-1-3/8<br />
1-1/2" E-Z Bore Bit 0.40 149H-1-1/2<br />
1-3/4" E-Z Bore Bit 0.50 149H-1-3/4<br />
2" E-Z Bore Bit 0.60 149H-2<br />
2-1/8" E-Z Bore Bit 0.70 149H-2-1/8<br />
2-1/4" E-Z Bore Bit 0.70 149H-2-1/4<br />
2-9/16" E-Z Bore Bit 0.80 149H-2-9/16<br />
3" E-Z Bore Bit 1.10 149H-3<br />
3-5/8" E-Z Bore Bit 2.10 149H-3-5/8<br />
4-5/8" E-Z Bore Bit 2.60 149H-4-5/8<br />
12-04-54A<br />
16-04-54A<br />
DBITKIT<br />
33AR-6<br />
4XT-54<br />
83<br />
9
9<br />
Hole Making<br />
84<br />
830QS<br />
Stainless Steel Carbide Tipped Cutter Kit<br />
l Cuts stainless steel quickly and easily<br />
l Quick Change arbor allows you to change cutter heads with a simple push<br />
and a turn. Use the same arbor for different size cutting heads<br />
l Removable cutter heads available in sizes from 5/8" through 3"<br />
l Flange stop prevents over-drilling<br />
l Ejector spring on all sizes above 3/4"<br />
l Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking<br />
l Precision carbide teeth for optimum performance and durability<br />
l Minimum chuck size of 3/8"<br />
Quick Change Hole Saw Kit<br />
Kit contains Bi-metal hole saws for 1/2" through 2" conduit sizes<br />
l New arbor allows for rapid mounting or removal of hole saws<br />
l Faster, easier slug removal<br />
660<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
l Drill pilot hole without saw:<br />
1. Eliminates the “bite” when saw crashes into the steel<br />
2. Provides better ergonomics - reduces stress on wrist, arm and hand<br />
3. Eliminates obstructed view from hole saw<br />
l Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2")<br />
l Works with recessed light and carbide grit hole saw products as well<br />
l Adapters re-usable to minimize costs<br />
l Universal - works with any brand hole saw<br />
Description No.<br />
Quick Change Hole Saw Kit for 1/2"<br />
through 2" Conduit sizes 830QS<br />
5/16" Arbor, Minimum chuck Size 3/8" 02800<br />
7/16" Arbor, Minimum chuck Size 1/2" 02801<br />
Retrofit Kit-upgrade 3 hole saws up to 1-9/16" to Quick Change 02802<br />
Small Adapters for 9/16" to 1-9/16" Saws Qty. 10 02803<br />
Large Adapters for 1-5/8" to 6" Saws Qty. 3 02804<br />
Bushings for 1-1/4" to 1-9/16" Saws Qty. 5 02805<br />
Hole saw stops 826S<br />
Description Hole size No.<br />
Stainless Steel Carbide Tipped Cutter Kit<br />
7/8', 1-1/8', 1-3/8', 1-3/4', 2' cutter heads;<br />
arbor, hex key and case 660<br />
Carbide-tipped hole cutter 5/8" 645-5/8<br />
Carbide-tipped hole cutter 11/16" 645-11/16<br />
Carbide-tipped hole cutter 3/4" 645-3/4<br />
Carbide-tipped hole cutter 13/16" 645-13/16<br />
Carbide-tipped hole cutter 7/8" 645-7/8<br />
Carbide-tipped hole cutter 1" 645-1<br />
Carbide-tipped hole cutter 1-1/16" 645-1-1/16<br />
Carbide-tipped hole cutter 1-1/8" 645-1-1/8<br />
Carbide-tipped hole cutter 1-7/32" 645-1-7/32<br />
Carbide-tipped hole cutter 1-1/4" 645-1-1/4<br />
Carbide-tipped hole cutter 1-5/16" 645-1-5/16<br />
Carbide-tipped hole cutter 1-3/8" 645-1-3/8<br />
Carbide-tipped hole cutter 1-7/16" 645-1-7/16<br />
Carbide-tipped hole cutter 1-1/2" 645-1-1/2<br />
Carbide-tipped hole cutter 1-3/4" 645-1-3/4<br />
Carbide-tipped hole cutter 2" 645-2<br />
Carbide-tipped hole cutter 2-1/8" 645-2-1/8<br />
Carbide-tipped hole cutter 2-1/4" 645-2-1/4<br />
Carbide-tipped hole cutter 2-3/8" 645-2-3/8<br />
Carbide-tipped hole cutter 2-1/2" 645-2-1/2<br />
Carbide-tipped hole cutter 2-5/8" 645-2-5/8<br />
Carbide-tipped hole cutter 3" 645-3<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Ultra Cutter Kit<br />
Ultra Cutter Kit: Includes 7/8" to 2-1/2" cutters, two small arbors for<br />
extended assembly to 7/8" and 1-1/2" cutters, large arbor, hex wrench, case.<br />
For conduit sizes 1/2" through 2".<br />
l Lasts 10 times longer than standard hole saws<br />
l Precision-ground teeth cut smooth, burr-free holes with ease<br />
l 1/4" (6.35 mm) capacity<br />
l Durability and speed provide low cost per hole<br />
l Split-point pilot drill prevents "walking" - makes accurate hole placement easy<br />
l Spring-loaded slug ejector saves time<br />
l No tool required to change cutter sizes<br />
l Less chance of broken teeth because the saw body is machined out of solid,<br />
high-speed steel<br />
Carbide-Grit Hole Saws<br />
Long-lasting tungsten carbide-grit delivers extremely clean, smooth<br />
cuts through tile, cement board, and other abrasive materials<br />
l Perfect for cutting holes in Quazite ® enclosure or hardy board siding<br />
for 3-0 box installation<br />
l Rugged construction for enduring performance<br />
Bi-Metal Hole Saw Kit<br />
725-001<br />
Kit Includes: 7/8" hole saw (825-7/8), 1-1/8" hole saw (825-1-1/8), 1-3/8" hole saw (825-<br />
1-3/8), 1-3/4" hole saw (825-1-3/4), 2" hole saw (825-2), 2-1/2" hole saw (825-2-1/2),<br />
Arbor w/Pilot Drill (2) (38522), Arbor w/Pilot Drill (37157), Arbor w/Pilot Drill (37155),<br />
Arbor w/Pilot Drill (37156)<br />
l This plumber‘s hole saw kit provides an assortment of the most commonly used Greenlee<br />
variable pitch hole saw sizes and arbors<br />
l High-impact, rugged plastic carrying case<br />
Description<br />
830<br />
800.545.7698 www.rothenberger-usa.com<br />
930<br />
Hole Making<br />
Description No.<br />
Ultra Cutter Kit 930<br />
Description No.<br />
1/4" Carbide-Grit Tipped Pilot Drill 725-001<br />
7/8" Hole Saw 725-7/8<br />
1-1/8" Hole Saw 725-1-1/8<br />
1-3/8" Hole Saw 725-1-3/8<br />
1-1/2" Hole Saw 725-1-1/2<br />
1-3/4" Hole Saw 725-1-3/4<br />
2" Hole Saw 725-2<br />
2-1/8" Hole Saw 725-2-1/8<br />
2-1/2" Hole Saw 725-2-1/2<br />
3-5/8" Hole Saw 725-3-5/8<br />
4-1/8" Hole Saw 725-4-1/8<br />
4-1/2" Hole Saw 725-4-1/2<br />
Hole Saw Kit for 1/2" through<br />
2" conduit sizes 830<br />
7/8" Hole Saw 825-7/8<br />
1-1/8" Hole Saw 825-1-1/8<br />
1-3/8" Hole Saw 825-1-3/8<br />
1-3/4" Hole Saw 825-1-3/4<br />
2" Hole Saw 825-2<br />
2-1/2" Hole Saw 825-2-1/2<br />
Arbor w/Pilot Drill 38522<br />
Arbor w/Pilot Drill 37157<br />
Arbor w/Pilot Drill 37155<br />
Arbor w/Pilot Drill 37156<br />
No.<br />
85<br />
9
9<br />
Hole Making<br />
Bi-Metal Hole Saw Kit<br />
Kit Includes: 3/4" hole saw (825-3/4), 7/8" hole saw (825-7/8), 1-1/8" hole saw<br />
(825-1-1/8), 1-1/2" hole saw (825-1-1/2), 1-3/4" hole saw (825-1-3/4), 2-1/4" hole saw<br />
(825-2-1/4), Arbor w/Pilot Drill (37155), Arbor w/Pilot Drill (37156), Arbor w/Pilot Drill<br />
(38526)<br />
l This plumber‘s hole saw kit provides an assortment of the most commonly used Greenlee<br />
variable pitch hole saw sizes and arbors<br />
l High-impact, rugged plastic carrying case<br />
Reciprocating Blades<br />
l Progressive-pitch reciprocating saw blades cut a wide<br />
rage of standard construction materials quickly and<br />
cleanly - regardless of thickness<br />
l Bimetal construction provides maximum flexibility and<br />
break resistance - plus lasting sharpness<br />
l Exclusive plunge tip makes starting cuts faster and<br />
easier<br />
l Blades color coded by application<br />
86<br />
09963<br />
09991<br />
889<br />
1940<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Description No.<br />
Plumber’s Hole Saw Kit-3/4" through<br />
2-1/4" conduit sizes 889<br />
5/16" Arbor, min. chuck size 3/8" 02800<br />
7/16" Arbor, min. chuck size 1/2" 02801<br />
Retrofit kit, upgrade 3 hole saws<br />
up to 1-9/16" to quick change 02802<br />
Small adaptors for 9/16" to 1-9/16" Saws, qty. 10 02803<br />
Large adaptors for 1-5/8" to 6" Saws, qty. 3 02804<br />
Bushings for 1-1/4" to 1-9/16" Saws, qty. 5 02805<br />
Hole saw stops 826S<br />
Teeth<br />
Description Length (in.) per inch Type Application No.<br />
Metal, 5 pk. 6 x 3/4 x .035 progressive Bimetal, straight metal 353-123<br />
Metal, 5 pk. 4 x 5/16 x .035 18 Bimetal, scroll metal 353-318<br />
Metal, 5 pk. 4 x 3/4 x .035 18 Bimetal, straight metal 353-418<br />
Metal, 5 pk. 6 x 3/4 x .035 14 Bimetal, straight metal 353-614<br />
Metal, 5 pk. 6 x 3/4 x .035 18 Bimetal, straight metal 353-618<br />
Metal, 5 pk. 6 x 3/4 x .035 24 Bimetal, straight metal 353-624<br />
Metal, 2 pk. 8 x 3/4 x .050 10/14 Bimetal, straight metal 353-804<br />
Metal, 2 pk. 8 x 3/4 x .050 14 Bimetal, straight metal 353-814<br />
Metal, 2 pk. 8 x 3/4 x .050 18 Bimetal, straight metal 353-818<br />
Wood, 5 pk. 8 x 3/4 x .050 progressive HCS, Taper wood only 353-234<br />
Wood, 5 pk. 6 x 3/4 x .050 6 Bimetal, Taper wood with nails 353-656<br />
Wood, 5 pk. 6 x 3/4 x .050 6 Bimetal, straight wood with nails 353-646<br />
Wood, 5 pk. 9 x 3/4 x .050 6 Bimetal, straight wood with nails 353-956<br />
Wood, 5 pk. 12 x 3/4 x .050 6 Bimetal, straight wood with nails 353-156<br />
Demolition, 2 pk. 9 x 7/8 x .062 6 Bimetal, taper wood demolition 353-966<br />
Demolition, 2 pk. 9 x 7/8 x .062 8 /10 Bimetal, taper metal demolition 353-969<br />
Specialty, 5 pk. 8 x 3/4 x .050 progressive Bimetal, taper general 353-345<br />
Flex Splitter ® and Flexible Conduit Cutter<br />
l Cut flexible metal conduit in seconds with a few turns of the crank and an easy twist<br />
of the conduit<br />
l Ample clearance between handle and body for comfortable operation<br />
l Set conduit size for multiple cuts of the same size conduit. No need to reset<br />
l Compact and lightweight. Fits easily in back pocket or tool pouch<br />
l Set blade adjustment with only a screwdriver<br />
l Convenient in-handle blade storage - holds up to five spare blades<br />
l Point-of-purchase packaged. Blades point-of-purchase packaged 1 and 5 blades per<br />
package<br />
Description No.<br />
Flex Splitter ® Flexible Metal Conduit Cutter 1940<br />
Single Blade for 1940 1941-1<br />
5 pack blades for 1940 1941-5<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
PVC Heating Blankets for up to 4"<br />
l Make bends, offsets or saddles in PVC fast and easy<br />
l Easy to use: wrap blanket around PVC, secure with hook and loop strap<br />
l Built-in stiffeners help keep the blanket tight to the PVC surface<br />
l Remove blanket and form bend by hand<br />
l Controlled, even heating for uniform bending<br />
l Heavy-duty cord and thermostat for long life<br />
l Temperature over 300° F (149° C)<br />
Description lb No.<br />
PVC Heating Blanket for up to 1-1/2" 1.70 860-1-1/2<br />
PVC Heating Blanket for 2"-3" 3.30 860-3<br />
PVC Heating Blanket for 3-1/2" and 4" 4.80 860-4<br />
Electric PVC Heater/Bender for 1/2" - 2"<br />
Specifications<br />
Capacity: 1/2"- 2" PVC All Schedules<br />
Power Source: 120 VAC 20 AMP or 3000 Watt Generator<br />
l Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and<br />
form bend<br />
l Sturdy double wall metal with fiberglass insulation and reflective interior for fast,<br />
even heat<br />
l Full length door for easy PVC loading and removal<br />
l Other features include on/off switch, pilot light and carrying handle<br />
l Heats 24" long section of pipe<br />
Description lb No.<br />
Electric PVC Heating Blanket for 1/2" to 2" 15.0 849<br />
PVC Plugs and Plug Set<br />
Specifications<br />
Capacity: 2" - 6" PVC Schedules 40 and 80<br />
l Use with PVC Heating Blankets or Electric Heaters to plug the ends of the PVC<br />
being heated<br />
l The trapped air will help keep the PVC from collapsing while forming the bend<br />
l Use on Schedule 40 and 80 PVC<br />
l Available in 2" - 4" set or individual sizes 2" - 6"<br />
l Order two, one for each end of the PVC<br />
Description lb No.<br />
PVC Plugs and Plug Set 8.0 859-4<br />
800.545.7698 www.rothenberger-usa.com<br />
860<br />
849<br />
Bending<br />
859-4<br />
87<br />
9
9<br />
Fishing<br />
Steel Fish Tape<br />
l 1/8" x .060" Oil-tempered spring steel for excellent fishing performance<br />
l Dirt-free tape finish keeps hands cleaner during use<br />
l High-impact, one-piece handle for maximum durability, long life, and easy,<br />
comfortable use<br />
l 360º uniform grip, “no bump” case design reduces fatigue<br />
l Large handle grip for greater user control<br />
l Self-tensioning case for easy tape winding<br />
l Wide, impact-resistant rewinder case with viewports to ensure tape fit and<br />
retaining strap on inside to hold tape secure<br />
Description lb No.<br />
125' x 1/8" Steel Fish Tape in 12" Winder Case 5.5 FTS438-125<br />
240' x 1/8" Steel Fish Tape in 12" Winder Case 8.5 FTS438-240<br />
Steel Fish Tape<br />
l 50' x 1/8" x .045" Steel Fish tape with winder case<br />
l Oil-tempered spring steel for excellent fishing performance<br />
l Durable thumb winder slide to speed payout and rewind of fish tape as well as<br />
reduce fatigue<br />
Description lb No.<br />
Steel Fish Tape 1.2 438-5H<br />
Flat-Steel Fish Tape<br />
l Flat steel tape reaches easily above ceilings, under carpets, and through walls<br />
to install wire<br />
l 25' (7.6 m) long, extending your reach where a traditional fish tape can't<br />
l Winder case with crank handle for easy compact storage<br />
l Dimensions: Steel tape 25' (7.6 m) long x 1/4" (6.4 mm) wide X .030<br />
(.8 mm) thick<br />
Description No.<br />
36" Telescoping Wire Reacher<br />
l Extends your reach above ceilings and walls<br />
l Stainless-steel construction for long life<br />
l Hook can be used to install cables and wires up to 3/4in. (19 mm) diameter<br />
l Clip included for easy storage in shirt pocket<br />
l Self-contained, no loose parts<br />
Description lb No.<br />
36" Telescoping Wire Reacher 1.6 FP3<br />
88<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Flat-Steel Fish Tape 438-2X 438-2X<br />
FP3<br />
438-5H<br />
FTS438-125<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Non-Contact Voltage Detector<br />
Accessories included: (2) 1.5V AAA batteries<br />
l Designed and assembled in USA<br />
l Automatic self-test verifies the integrity of the unit<br />
l Bright LEDs and audible alarm sound if voltage is present<br />
l Silent-mode feature for use in quiet settings<br />
l Safe, non-contact voltage detection<br />
l Use to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and<br />
cables or to find a break in a wire<br />
l Automatically turns off after five minutes of non-use to conserve battery life<br />
l Low battery indicator<br />
l Lifetime Limited Warranty<br />
Adjustable Non-Contact Voltage Detector<br />
Accessories included: (1) 1.5V AAA Battery<br />
l Adjustable to safely detect power and low voltage<br />
l Safely detects AC voltage without touching the bare conductor<br />
l Adjustable for use on power wiring plus lighting, thermostats and<br />
other low voltage circuits<br />
l Use to detect voltage in outlets, lighting fixtures, wires and cables<br />
l Finds breaks in wires<br />
l Identifies hot and neutral conductors<br />
l Low battery Indication<br />
800.545.7698 www.rothenberger-usa.com<br />
Testing & Measurement<br />
GT-12<br />
Description No.<br />
Non-Contact Voltage Detector GT-12<br />
l Lifetime Limited Warranty Description No.<br />
DM-210A Digital Multimeter<br />
The DM-210A provides all of the critical day-to-day features of handheld<br />
multimeters in a smaller, ergonomic design. Look to this detector<br />
to take advantage of AutoCHECK, EF-Detection, audible and visible<br />
alerts and a back-lit LCD display.<br />
l Display backlight<br />
l Analog bar graph<br />
l Computer Interface capability<br />
l Auto Power Off<br />
l Auto and manual ranging<br />
l Data Hold<br />
DM-510A Digital Multimeter<br />
Specifications<br />
Voltage Detection: 50V–1000VAC<br />
Frequency: 50-500 Hz<br />
Measurement Category: CAT IV, 1000V<br />
Specifications<br />
Voltage: 60mV to 1,000V AC/DC<br />
Display counts: 6000<br />
Amperage: 600mA to 10A AC/DC<br />
Measurement Category: CAT IV 300V, CAT III 600V,<br />
CAT II 1000V<br />
The DM-510A provides critical functions in a streamlined design for<br />
CAT IV 300V, CAT III 600V and more, in a smaller, ergonomic design.<br />
Look to this detector to take advantage of AutoCHECK, EF-Detection,<br />
audible and visible alerts and a back-lit LCD display.<br />
l Display backlight<br />
l Analog bar graph<br />
l Computer Interface capability<br />
l Auto Power Off<br />
l Auto and manual ranging<br />
l Data Hold<br />
Specifications<br />
Voltage Detection: AC V 5-1000<br />
Frequency: 50-500Hz<br />
Measurement Category: CAT IV, 1000V<br />
Specifications<br />
Voltage: 60mV to 1,000V AC/DC<br />
Display counts: 6000<br />
Amperage: 600mA to 10A AC/DC<br />
Measurement Category: CAT IV 300V, CAT III 600V,<br />
CAT II 1000V<br />
GT-16<br />
Adjustable Non-Contact Voltage Detector GT-16<br />
DM-210A<br />
Description No.<br />
Digital Multimeter DM-210A<br />
DM-510A<br />
Description No.<br />
Digital Multimeter DM-510A<br />
89<br />
9
9<br />
Testing & Measurement<br />
Automatic Electrical Tester<br />
Accessories included: (1) 9 V battery, test leads,<br />
carrying case<br />
l Hassle-free, automatic measurement of amperage,<br />
voltage, and resistance<br />
l Compact design for measuring in tight spaces<br />
l 400A AC, 600V AC/DC measurement<br />
l Data hold to capture important readings<br />
l Auto off for longer battery life<br />
Manual Ranging Multimeter<br />
Accessories included: (1) 9V battery, Type K bead<br />
temperature probe (482ºF/250ºC max), protective<br />
boot<br />
l Measures AC/DC voltage, DC current, and<br />
resistance<br />
l Measures temperature over a wide range<br />
l Performs continuity and diode tests<br />
Infrared Thermometer<br />
Accessories included: (1) 9V battery and<br />
carrying case<br />
l Safe, non-contact temperature measurement<br />
l Laser indicates approximate center of the<br />
target area<br />
l Displays temperatures in either Fahrenheit or<br />
Celcius<br />
l Auto power off for longer battery life<br />
l Easy to read backlit display for use in low light<br />
conditions<br />
True RMS Clamp Meter<br />
Accessories included: 3V Standard button battery (IEC-CR<br />
2032; ANSI-NEDA 54004LC)<br />
l AC amperage, AC/DC voltage measurement<br />
l True RMS for the most accurate measurement where<br />
harmonics are present<br />
l Quick, easy operation<br />
l Auto power off for longer battery life<br />
l Resistance measurement<br />
l Audible continuity and diode tests<br />
l Frequency measurement<br />
l Data hold to capture measurement<br />
l 4000 count LCD<br />
l Lifetime Limited Warranty<br />
90<br />
CM-450<br />
TG-600<br />
CMT-80<br />
DM-40<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Specifications<br />
Amperage Measurement: 0.6 - 400.0A AC<br />
Voltage Measurement: AC V: 1.3-600.0V; DC V: 1.8-600.0;<br />
-0.6 to -600.0V<br />
Resistance: 2000Ω with continuity beeper<br />
Display: 6000-count LCD<br />
Jaw Opening: 1.06 " (27 mm)<br />
Measurement Category: Cat III, 600V<br />
Description No.<br />
Automatic Electrical Tester CMT-80<br />
Specifications<br />
Voltage Measurement: ACV - 200.0, 300V;<br />
DCV - 200.0, 2000mV; 20.00, 200.0, 300V<br />
Amperage Measurement: DCA - DCA 200.0, 2000µA; 20.00,<br />
200.0mA<br />
Resistance: 200.0, 2000Ω; 20.00, 200.0, 2000kΩ<br />
Temperature Range: -40°F to 1832°F (-40°C to 1000°C)<br />
Measurement Category: Cat II, 300V<br />
Description No.<br />
Multimeter, DMM, 600V AC/DC w/temp DM-40<br />
Specifications<br />
Optical resolution: 12:1 at focus point<br />
Target Temperature Range: -4°F to 932°F (-20°C to 500°C)<br />
Accuracy: ± 2% or 4°F (± 2°C)<br />
Repeatability: Within ± 1% of reading or ± 2°F (1°C)<br />
Response Time: 500ms, 95% response<br />
Emissivity: Preset at 0.98<br />
Description No.<br />
Infrared Thermometer TG-600<br />
Specifications<br />
Amperage Measurement: 40.00, 400.0, 600 A AC<br />
Voltage Measurement: 4.000, 40.00, 400.0, 600 V AC<br />
400.0 mV, 4.000, 40.00, 400.0, 600V DC<br />
Resistance: 400.0Ω; 4.000, 40.00, 400.0kΩ; 4.000, 40.00MΩ<br />
Display: LCD, 4000-count<br />
Jaw Opening: 1.02" (26 mm)<br />
Measurement Catagory: CAT III, 600V per UL 61010-1<br />
Description No.<br />
True RMS Clamp Meter CM-450<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Specifications<br />
Electrical: Twelve AA batteries<br />
Battery Life: 20 hours typical<br />
Environment: Operating Temperature:<br />
-4° to 122°F (-20°C to 50°C);<br />
Storage Temperature: -40°<br />
to 158°F (-40°C to 70°C)<br />
Physical: Length: 30.7" (780mm);<br />
Width: 7.8" (198mm);<br />
Height: 12.8" (325mm)<br />
Omni Marker ®<br />
Wire and Valve Locator<br />
l Adjustable transmit power allows you to select the best signal for<br />
maximum performance<br />
l Transmitter’s high power output offers extended range and use<br />
on higher resistance wire paths that other locators can’t touch<br />
l Receiver provides both audible and visual indications of signal<br />
strength<br />
l Lightweight receiver wand makes it easy for you to move along<br />
quickly to locate even the longest wire path<br />
l Rugged headphones block ambient noise and improve “feel” for<br />
the signal<br />
l Includes transmitter, receiver, headset, ground stake, and<br />
complete instructions<br />
Description lb No.<br />
Wire and Valve Locator 12.0 521A<br />
EML100<br />
l Electronically marks and relocates buried facilities<br />
l Unique design produces a uniform, spherical RF field in every direction<br />
l Easily located up to 5' away with any modern marker locator<br />
l Wider field with a signal peak directly above the marker provides<br />
precise location<br />
l Requires no particular orientation when buried<br />
l Greater range than standard 4" ball markers<br />
l High-reliability design lasts as<br />
long as your buried plant<br />
l Color coded by utility application<br />
l Lifetime limited warranty<br />
Uni Marker ®<br />
l Electronically marks buried facilities for later relocation<br />
l Rugged polyethylene case ensures years of useful life<br />
l Small size and flat design attach easily to non-metallic<br />
utility box lids, hand holes and other buried enclosures<br />
l Location is simple with any modern marker locator<br />
l Range is 25% more than other similar-style markers<br />
l Signal peak ensures location within inches of the<br />
marker<br />
l Color coded by utility application<br />
l Lifetime limited warranty<br />
160-168<br />
170-178<br />
800.545.7698 www.rothenberger-usa.com<br />
Testing & Measurement<br />
Marker-Mate ® Electronic Marker Locator<br />
l Designed to locate buried electronic markers, including Omni Marker ® ,<br />
and Uni Marker <br />
l Five+ foot depth range<br />
l Detects up to seven different marker types<br />
l User-adjustable detection threshold<br />
l Bar graph, numeric & audible signal strength indicators<br />
l Headphone jack<br />
l Adjustable time out feature prolongs battery life<br />
l Weather resistant<br />
Description lb No.<br />
Marker-Mate ® Electronic Marker Locator 4.50 EML100<br />
Description / Application Color Frequency No.<br />
Omni Marker ® / Power Red 169.8kHz 0160-0001-1<br />
Omni Marker ® / Water Blue 145.7kHz 0161-0001-1<br />
Omni Marker ® / Sanitary Green 121.6kHz 0162-0001-1<br />
Omni Marker ® / Telephone Orange 101.4kHz 0163-0001-1<br />
Omni Marker ® / Gas Yellow 83.0kHz 0164-0001-1<br />
Omni Marker ® / Cable TV Orange/Black 77.0kHz 0165-0001-1<br />
Omni Marker ® / Non-Potable Water Purple 66.35kHz 0168-0001-1<br />
Description / Application Color Frequency No.<br />
Uni Marker ® / Power Red 169.8kHz 0170-0001-1<br />
Uni Marker ® / Water Blue 145.7kHz 0171-0001-1<br />
Uni Marker ® / Sanitary Green 121.6kHz 0172-0001-1<br />
Uni Marker ® / Telephone Orange 101.4kHz 0173-0001-1<br />
Uni Marker ® / Gas Yellow 83.0kHz 0174-0001-1<br />
Uni Marker ® / Cable TV Orange/Black 77.0kHz 0175-0001-1<br />
Uni Marker ® / Non-Potable Water Purple 66.35kHz 0178-0001-1<br />
521A<br />
Specifications<br />
Power Requirements: Transmitter - (8) “D” Cell;<br />
Receiver - (1) 9V battery<br />
Battery Life: Transmitter - 50 hours nominal;<br />
Receiver - 100 hours nominal<br />
Transmitter Frequency: 1748Hz<br />
Transmitter Power: 750Vp-p 285Vrms<br />
Voltage Protection: 120VAC/250VDC<br />
Construction: Powder-coated aluminum housing in polyethylene case<br />
Case Dimensions: 33.5" x 8.25" x 3.75"<br />
91<br />
9
9<br />
Storage<br />
Mobile Storage Chest<br />
l Patented, recessed and concealed lock protectors for maximum security against drilling<br />
and cutting lock<br />
l Enhanced lid bolster for added support and durability<br />
l Finger-groove lid handle for easy opening<br />
l Convenient storage tray on back wall for small items<br />
l Steel support arms to hold lid in open position<br />
l Heavy-duty piano hinges with non-removable pin<br />
l Large, fold-down recessed handles for convenient lifting<br />
l Built-in 3-1/2" high skids with holes for easy caster installation<br />
l Optional threaded casters are available separately for easy mobility<br />
Specifications: (2448)<br />
Capacity: 16FT 3 (.45m 3 )<br />
Height: 24" (610mm)<br />
Width: 48" (1219mm)<br />
Depth: 24" (610mm)<br />
Slant-Top Box<br />
92<br />
Specifications: (3048)<br />
Capacity: 25FT 3 (.71m 3 )<br />
Height: 30" (762mm)<br />
Width: 48" (1219mm)<br />
Depth: 30" (762mm)<br />
Specifications: (1332)<br />
Capacity: 4.9FT<br />
Height: 14"<br />
Width: 32"<br />
Depth: 19"<br />
Specifications<br />
Capacity: 44FT3 (1.23m3 )<br />
Height: 48" (1219mm)<br />
Width: 60" (1524mm)<br />
Depth: 30" (762mm)<br />
Weight: 282lb. (128kg)<br />
l Large capacity storage with traditional slant-top design<br />
l Recessed and concealed lock protectors provide maximum security against<br />
drilling and cutting locks<br />
l Channel reinforcements on lid lock side panels into lid for added security<br />
when closed<br />
l Convenient storage tray on back wall for small items<br />
l Hinged lower shelf enables lower storage of larger items<br />
l Hemmed (reinforced) high-strength shelves<br />
l Continuous, non-removable hinge pins help prevent theft<br />
l Strategically located, easily accessible, durable gas-shocks provide for ease in<br />
opening lid<br />
l Angled 3-1/2" high support skids<br />
l Angled handle recess prevents pinch points<br />
l Features two reinforced steel shelves with large lip to prevent items from<br />
rolling off<br />
l Double-hinged cover folds up and out of the way<br />
l Optional casters are available separately for easy mobility<br />
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
2448<br />
Description lb No.<br />
Mobile Storage Chest 159.0 2448<br />
Mobile Storage Chest 183.0 3048<br />
Mobile Storage Chest 83.0 1332<br />
6" Swivel Casters (4) 22.0 503<br />
6" Swivel Casters (2 rigid, 2 swivel) 20.0 603<br />
3660<br />
Description lb No.<br />
Slant-Top Boxes 282.0 3660<br />
6" Swivel Casters (4) 22.0 503<br />
6" Swivel Casters (2 rigid, 2 swivel) 20.0 603<br />
800.545.7698 www.rothenberger-usa.com
For more information on the full Greenlee line,<br />
visit www.Greenlee.com or call<br />
Customer Service at 1-800-545-7698<br />
Specifications<br />
Capacity: 50FT 3 (1.42m 3 )<br />
Height: 48" (1219mm)<br />
Width: 60" (1524mm)<br />
Depth: 30" (762mm)<br />
Weight: 305lb. (138kg)<br />
4860<br />
Description lb No.<br />
Flat-Top Box 305.0 4860<br />
6" Swivel Casters (4) 22.0 503<br />
6" Swivel Casters (2 rigid, 2 swivel) 20.0 603<br />
Conduit and Pipe<br />
Storage Rack<br />
5660L<br />
l 7 individual bins allow you to sort by<br />
size and type<br />
l Folds down for storage<br />
l Casters included<br />
Specifications<br />
Capacity: 46FT 3 (1.3m 3 )<br />
Height: 56" (1422mm)<br />
Width: 60" (1524mm)<br />
Depth: 24" (610mm)<br />
Weight: 401lb. (182kg)<br />
800.545.7698 www.rothenberger-usa.com<br />
668<br />
Flat-Top Box<br />
Storage<br />
l Flat-top design provides more storage capacity for tall, bulky items, plus a<br />
large work surface for jobsite plans<br />
l Recessed and concealed lock protector inhibits forced entry and corrosion<br />
to lock<br />
l Channel reinforcements on lid lock side panels into lid for added security<br />
when closed<br />
l Hinged lower shelf allows for easy storage of larger objects<br />
l Angled handle recess prevents pinch points<br />
l Hemmed (reinforced) high-strength shelves<br />
l Continuous, non-removable hinge pins help prevent theft<br />
l Side-wall storage<br />
l Strategically located, easily accessible, durable gas-springs provide for ease in<br />
opening lid<br />
l Double hinge cover folds up and out of the way<br />
l Angled 3-1/2" high support skids<br />
l Optional casters are available separately for easy mobility<br />
Utility Cabinet<br />
l Recessed and concealed lock protector inhibits forced entry and<br />
corrosion to lock<br />
l Flush-mounted doors<br />
l Finger-groove door handles<br />
l Front-door storage<br />
l Hemmed (reinforced) high-strength shelves<br />
l Large, lower storage areas for bigger items<br />
l Continuous, non-removable hinge pins help prevent theft<br />
l Angled handle recess prevents pinch points<br />
l Three 3-1/2" high support skids<br />
l Weather-resistant design<br />
l Optional casters are available separately for easy mobility<br />
Description lb No.<br />
Utility Cabinet 401.0 5660L<br />
6" Swivel Casters (4) 22.0 503<br />
6" Swivel Casters (2 rigid, 2 swivel) 20.0 603<br />
Specifications<br />
Capacity: 1000 lbs. (454 kg)<br />
Dimensions: 58-1/2" (1486 mm) long x 34" (864 mm)<br />
wide x 63-1/2" (1613 mm) high<br />
Folded Down: 58-1/2" (1486 mm) long x 34" (864 mm)<br />
wide x 19"<br />
(483 mm) high<br />
Description lb No.<br />
Conduit and Pipe Storage Rack 113.0 668<br />
93<br />
9
9<br />
Notes<br />
94<br />
800.545.7698 www.rothenberger-usa.com
Index<br />
Numerical Index 100 – 110<br />
Alphabetical Index 111 – 114<br />
10<br />
99
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
000<br />
00001 ROCOOL ® CUTTING OIL (six 1 gallon containers) 32<br />
00002 ROCOOL ® Cutting OIL (5 gallons) 32<br />
00003 ROCOOL ® CUTTING OIL (55 gallons) 32<br />
00004 DIES, BOLT, UNC ( 1/4" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00005 DIES, BOLT, UNC ( 5/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00006 DIES, BOLT, UNC ( 3/8" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00007 DIES, BOLT, UNC ( 7/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00008 DIES, BOLT, UNC ( 1/2" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00009 DIES, BOLT, UNC ( 9/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00010 DIES, BOLT, UNC ( 5/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00011 DIES, BOLT, UNC ( 3/4" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00012 DIES, BOLT, UNC ( 7/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00013 DIES, BOLT, UNC ( 1" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00014 DIES, UNC ( 1-1/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00015 DIES, UNC ( 1-1/4" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00016 DIES, UNC ( 1-3/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00017 DIES, UNC ( 1-1/2" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00018 DIES, UNC ( 1-5/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00019 DIES, UNC ( 1-3/4" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00020 DIES, UNC ( 1-7/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00021 DIES, UNC ( 2" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00022 DIES, UNC ( 2-1/4" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00023 DIES, SOM ( 1" & 1-1/4" NPT - 22A, PANTHER ® ) 34, 37<br />
00024 DIES, SOM ( 1-1/2" & 2" NPT - 22A, PANTHER ® ) 34, 35, 36, 37<br />
00025 DIES, UNIQUAD ® ( 1/8" NPT - 22A, PANTHER ® ) 35<br />
00026 DIES, UNIQUAD ® ( 1/4" & 3/8" NPT - 22A, PANTHER ® ) 35<br />
00027 DIES, NPT ( 1/2" & 3/4" - 22A, PANTHER ® ) 34, 35<br />
00028 DIES, SOM ( 1" & 2" NPT - 22A, PANTHER ® ) 34, 35, 36, 37<br />
00029 DIES, SOM ( 1/8" NPT - 22A, PANTHER ® ) 34<br />
00030 DIES, SOM ( 1/4" & 3/8" NPT - 22A, PANTHER ® ) 34<br />
00031 DIES, SOM ( 1/2" & 3/4" NPT - 22A, PANTHER ® ) 34, 35, 36<br />
00032 E-Z CUTTER, MODEL A ( 115V) 39<br />
00033 E-Z CUTTER, MODEL C ( 115V) 39<br />
00034 CUTTER WHEEL, STEEL, E-Z Cutter 39<br />
00035 CUTTER WHEEL, COPPER, E-Z Cutter 39<br />
00036 SUPPORT, STATIONARY, E-Z CUTTER 39<br />
00037 EZ CUTTER STAND 39<br />
00039 44A THREAD-O-MATIC ® 30<br />
00041 DIES, SOM ( 2-1/2" - 3" NPT) 36, 37<br />
00042 DIES, SOM ( 3-1/2" - 4" NPT) 36, 37<br />
00043 DIES, SOM ( 5"- 6" NPT) 37<br />
00045 OPEN WHEELED STAND (WITH TOOL TRAY) 28<br />
00047 DIES, SOM, STAINLESS ( 2-1/2" - 3" NPT) 36, 37<br />
00048 DIES, SOM, STAINLESS ( 3-1/2" - 4" NPT) 36, 37<br />
00049 DIES, SOM, SS ( 5" NPT) 37<br />
00050 DIES, UNIQUAD ® ( 1/8" NPT STAINLESS - 22A, PANTHER ® ) 35<br />
00051 DIES, UNIQUAD ® ( 1/4" & 3/8" NPT STAINLESS - 22A, PANTHER ® ) 35<br />
00052 DIES, UNIQUAD ® ( 1/2" & 3/4" NPT STAINLESS - 22A, PANTHER ® ) 35<br />
00053 DIES, SOM, STAINLESS ( 1" & 1-1/4" NPT - 22A, PANTHER ® ) 34, 35, 36, 37<br />
00054 DIES, SOM, STAINLESS ( 1-1/2" & 2" NPT - 22A, PANTHER ® ) 34, 35, 36, 37<br />
00055 DIE HEAD, SOM ( 2-1/2" - 3" NPT - 22A, PANTHER ® ) 36<br />
100<br />
00056 DIE HEAD, SOM, ( 2-1/2" - 3" NPT - 66A) 37<br />
00057 DIE HEAD, SOM ( 3-1/2" - 4" NPT - 22A, PANTHER ® ) 36<br />
00058 DIE HEAD, SOM, ( 3-1/2" - 4" NPT - 66A) 37<br />
00059 DIE HEAD, SOM ( 5" NPT) 37<br />
00060 DIE HEAD, SOM ( 6" NPT) 37<br />
00061 DIE HEAD, SOM ( 1/8" NPT - 22A, PANTHER ® ) 34<br />
00062 DIE HEAD, SOM ( 1/4" & 3/8" NPT - 22A, PANTHER ® ) 34<br />
00063 DIE HEAD, SOM ( 1/2" & 3/4" NPT - 22A, PANTHER ® ) 34, 36<br />
00064 DIE HEAD, SOM ( 1" & 1-1/4" NPT - 22A, PANTHER ® ) 34, 36, 37<br />
00065 DIE HEAD, SOM ( 1-1/2" & 2" NPT - 22A, PANTHER ® ) 34, 36, 37<br />
00066 DIE HEAD, SOM ( 1" - 2" NPT - 22A, PANTHER ® ) 34, 36, 37<br />
00069 ROLLER BEARING SUPPORT 39<br />
00071 PIPE SUPPORT FITTING 39<br />
00072 NIPPLE CHUCK ASSEMBLY FOR 2-1/2" - 4" PIPE 31<br />
00073 NIPPLE CHUCK ASSEMBLY FOR 5" - 6" 31<br />
00074 MINI-COLLINS ® DRIVE ( 115V) 25<br />
00077 SAFEVISE 25<br />
00078 PNEUMATIC MINI_COLLINS ® DRIVE 25<br />
00079 FOOT SWITCH ( 115V) 39<br />
00088 NIPPLE MAX Set ( 1/2" - 2") 31<br />
00089 NIPPLEMAX SET ( 1/2" - 2" NPT) - 22A, RHINO ® , 33A, 44A, 66A) 31<br />
00097 REAMER ( 1/8" - 2" CONICAL, 5-BLADE REAMER ASSEMBLY) 29<br />
00098 NIPPLE CHUCK ASSEMBLY FOR 2-1/2" - 4" CONDUIT 31<br />
00<br />
00100 ONE SET OF BALL TRANSFER HEAD 33<br />
00101 SUPERJACK WITH BALL TRANSFER HEAD 33<br />
00104 SPARE CUTTER WHEEL (1 ONLY) 29<br />
00105 SPARE CUTTER WHEEL (3 PACK) 29<br />
00106 CUTTER ASSEMBLY 29<br />
00107 ( 2-1/2" - 4") TWIN-EDGED BLADE 29<br />
00111 MINI-COLLINS ® ADAPTER FOR RIDGID ® 111-R 25<br />
00116 MINI-COLLINS ® ADAPTER FOR SQUARE SHAFT ( 7/8") 25<br />
00117 MINI-COLLINS ® ADAPTER FOR SQUARE SHAFT 1"<br />
(FOR GEARED THREADER) 25<br />
00118 MINI-COLLINS ® ADAPTER FOR SQUARE SHAFT ( 1-1/4") 25<br />
00119 STEEL CARRYING CASE 25<br />
00121 DIE HEAD, RIDGID ® STYLE, 50R MANUAL ( 1/4" - 3/8") 35<br />
00125 DIES, RIDGID ® STYLE, H.S. STEEL ( 1/2" - 3/4" NPT) 35<br />
00126 DIES, RIDGID ® STYLE, H.S. STEEL ( 1" - 2" NPT) 35<br />
00154 WATER-PROOF COVER 28<br />
00155 OIL SUMP BAFFLE 28<br />
00157 SPARE CUTTER WHEEL (1) 28<br />
00158 SPARE CUTTER WHEEL (6) 28<br />
00159 CUTTER ASSEMBLY, WHEEL TYPE 28<br />
00160 REAMER, 1/8" - 2" CONICAL, 5-BLADE 28<br />
00161 3 STEP, WITH EMERGENCY STOP SWITCH ( 115V) 32<br />
00174 66A THREAD-O-MATIC ® 30<br />
00184 NIPPLE CHUCK ( 1/2") 31<br />
00185 NIPPLE CHUCK ( 3/4") 31<br />
00186 NIPPLE CHUCK ( 1") 31<br />
00187 NIPPLE CHUCK ( 1-1/4") 31<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
00188 NIPPLE CHUCK ( 1-1/2") 31<br />
00189 NIPPLE CHUCK ( 2") 31<br />
00190 NIPPLE CHUCK ( 1/2") 31<br />
00191 NIPPLE CHUCK ( 3/4") 31<br />
00192 NIPPLE CHUCK ( 1") 31<br />
00193 NIPPLE CHUCK ( 1-1/4") 31<br />
00194 NIPPLE CHUCK ( 1-1/2") 31<br />
00195 NIPPLE CHUCK ( 2") 31<br />
00199 NIPPLE MAX Set ( 1/2" - 2") EXTENSION BAR 31<br />
00200 DIE HEAD, SOM ( 1/2" & 3/4" NPSM - 22A, PANTHER ® ) 34, 36<br />
00201 DIE HEAD, SOM ( 1/4" & 3/8" NPSM - 22A, PANTHER ® ) 34<br />
00202 DIE HEAD, SOM ( 1/8" NPSM - 22A, PANTHER ® ) 34<br />
00203 DIE HEAD, SOM ( 1" - 2" NPSM - 22A, PANTHER ® ) 34, 36, 37<br />
00204 DIE HEAD, SOM ( 5" NPSM - 66A) 37<br />
00205 DIE HEAD, SOM ( 2-1/2" - 3" NPSM - 33A, 44A) 36<br />
00206 DIE HEAD, SOM ( 2-1/2"- 3" NPSM - 66A) 37<br />
00207 DIE HEAD, SOM ( 3-1/2" - 4" NPSM - PANTHER) 36<br />
00208 DIE HEAD, SOM ( 3-1/2"- 4" NPSM - 66A) 37<br />
00209 DIE HEAD, SOM ( 6" NPSM 66A) 37<br />
00217 DIES, RIDGID ® STYLE, STAINLESS STEEL ( 1/4" - 3/8" NPT) 35<br />
00218 DIES, RIDGID ® STYLE, STAINLESS STEEL ( 1/2" - 3/4" NPT) 35<br />
00219 DIES, RIDGID ® STYLE, STAINLESS STEEL ( 1" - 2" NPT) 35<br />
00221 DIE HEAD, AUTOMATIC ( 1/2" - 2" - 22A, PANTHER ® ) 34, 37<br />
00222 DIE HEAD, UNC/UNF BOLT, UNIQUAD<br />
( 1/4" - 2-1/4" NPT - 22A, PANTHER ® ) 35, 36, 37<br />
00223 DIE HEAD, UNC/UNF BOLT, UNIQUAD ( 2-1/2"-3" NPT - 33A, 44A) 36<br />
00224 DIE HEAD, SOM BOLT ( 2-1/2"- 4" - 66A) 38<br />
00225 DIES, SOM, STAINLESS ( 1/8" NPT - 22A, PANTHER ® ) 34<br />
00226 DIES, SOM, STAINLESS ( 1/4" - 3/8" NPT - 22A, PANTHER ® ) 34<br />
00227 DIES, SOM, STAINLESS ( 1/2" - 3/4" NPT - 22A, PANTHER ® ) 34, 36<br />
00228 DIES, SOM, SS ( 6" NPT - 66A) 37<br />
00300 DIES, UNIQUAD ® ( 1/2" & 3/4" NPSM - 22A, PANTHER ® ) 34, 35<br />
00301 DIES, SOM ( 1" - 2" NPSM - 22A, PANTHER ® ) 34, 35, 36, 37<br />
00302 DIES, SOM ( 1/2" & 3/4" NPSM - 22A, PANTHER ® ) 34, 36<br />
00303 DIES, SOM ( 1/8" NPSM - 22A, PANTHER ® ) 34, 35<br />
00304 DIES, SOM ( 1/4" & 3/8" NPSM - 22A, PANTHER ® ) 34, 35<br />
00305 DIES, SOM ( 2-1/2" - 3" NPSM - 33A, 44A, 66A) 36, 37<br />
00306 DIES, SOM ( 3-1/2"- 4" NPSM 33A, 44A, 66A) 37<br />
00307 DIES, SOM ( 5"- 6" NPSM - 66A) 37<br />
00330 DIES, UNC BOLT, SOM, ( 2-1/2" - RH ONLY 66A) 36, 38<br />
00331 DIES, UNC BOLT, SOM, ( 2-3/4" - RH ONLY 66A) 36, 38<br />
00332 DIES, UNC BOLT, SOM, ( 3" - RH ONLY 66A) 36, 38<br />
00333 DIES, UNC, SOM, BOLT ( 3-1/4" - RH ONLY 66A) 38<br />
00334 DIES, UNC, SOM, BOLT ( 3-1/2" - RH ONLY 66A) 38<br />
00335 DIES, UNC, SOM, BOLT ( 3 -3/4" - RH ONLY 66A) 38<br />
00336 DIES, UNC, SOM, BOLT ( 4" - RH ONLY 66A) 38<br />
00340 DIES, BOLT UNF ( 1/4" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00341 DIES, BOLT UNF ( 5/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00342 DIES, BOLT UNF ( 3/8" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00343 DIES, BOLT UNF ( 7/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00344 DIES, BOLT UNF ( 1/2" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00345 DIES, BOLT UNF ( 9/16" - 22A, PANTHER ® , UNIQUAD ® ) 35<br />
00346 DIES, BOLT UNF ( 5/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
800.545.7698 www.rothenberger-usa.com<br />
00347 DIES, BOLT UNF ( 3/4" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00348 DIES, BOLT UNF ( 7/8" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00349 DIES, BOLT UNF ( 1" - 22A, PANTHER ® , UNIQUAD ® ) 35, 36<br />
00350 DIES, BOLT UNF, SOM/UNIQUAD ( 1-1/8" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36<br />
00351 DIES, BOLT UNF, SOM/UNIQUAD ( 1-1/4" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36<br />
00352 DIES, BOLT UNF, SOM/UNIQUAD ( 1-3/8" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00353 DIES, BOLT UNF, SOM/UNIQUAD ( 1-1/2" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00354 DIES, BOLT UNF, SOM/UNIQUAD ( 1-5/8" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00355 DIES, BOLT UNF, SOM/UNIQUAD ( 1-3/4" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00356 DIES, BOLT UNF, SOM/UNIQUAD ( 1-7/8" - 22A,<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00357 DIES, BOLT UNF, SOM/UNIQUAD ( 2" - 22A,<br />
Numerical Index<br />
PANTHER ® , 33A, 44A, 66A) 35, 36, 38<br />
00470 DIE HEAD, GROOVE & BEVEL ( 1"- 2" - ALL UNITS) 38<br />
00471 DIE HEAD, GROOVE & BEVEL ( 3/4"- 2" - 22A, 33A, 44A) 38<br />
00472 DIE HEAD, GROOVE & BEVEL ( 2 1/2"- 3" - 33A, 44A) 38<br />
00473 DIE HEAD, GROOVE & BEVEL ( 3-1/2"- 4" - 33A, 44A) 38<br />
00474 DIE HEAD, GROOVE & BEVEL ( 5"- 6" - 66A) 38<br />
00475 DIE HEAD, GROOVE & BEVEL ( 2-1/2"- 3" - 66A) 38<br />
00476 DIE HEAD, GROOVE & BEVEL ( 3-1/2"- 4" - 66A) 38<br />
00477 GROOVING & CUTTING BIT ( 3/4"- 2" - ALL UNITS) 38<br />
00478 CUTTING TOOL, CUT OFF ONLY ( 3/4"- 2" - ALL UNITS) 38<br />
00479 CUTTING TOOL, DOUBLE BEVEL 37.5° ( 3/4"- 2" - ALL UNITS) 38<br />
00480 CUTTING TOOL, DOUBLE BEVEL 45° ( 3/4"- 2" - ALL UNITS) 38<br />
00481 CUTTING TOOL, SARAN ( 3/4"- 2" - ALL UNITS) 38<br />
00482 GROOVING & CUTTING BIT ( 2-1/2"- 4" - ALL UNITS) 38<br />
00483 CUTTING TOOL, CUT OFF ONLY ( 2-1/2"- 6" - ALL UNITS) 38<br />
00484 CUTTING TOOL, DOUBLE BEVEL 37.5° ( 2-1/2"- 6" ALL UNITS) 38<br />
00485 CUTTING TOOL, DOUBLE BEVEL 37.5° ( 2-1/2"- 6" ALL UNITS) 38<br />
00486 CUTTING TOOL, DOUBLE BEVEL 45° ( 2-1/2"- 6" - ALL UNITS) 38<br />
00487 CUTTING TOOL, SARAN ( 2-1/2"- 6" - ALL UNITS) 38<br />
00488 DIE SET, CENTERING ( 1"- 2" - ALL UNITS ) 38<br />
00489 DIE SET, CENTERING ( 3/4" - 2" - 22A, 33A, 44A ) 38<br />
00490 DIE SET, CENTERING ( 2-1/2" - 3" - 33A,44A,66A,RHINO ® ) 38<br />
00491 DIE SET, CENTERING ( 3-1/2" - 4" - 33A,44A,66A,RHINO ® ) 38<br />
00492 DIE SET, CENTERING ( 5" - 6" - 33A, 44A, 66A ) 38<br />
00533 E-Z CUTTER, MODEL A ( 230V) 39<br />
00534 E-Z CUTTER, MODEL C ( 230V) 39<br />
00535 CUTTER WHEEL, SOIL PIPE (E-Z CUTTER) 39<br />
00536 CUTTER WHEEL, PLASTIC PIPE 39<br />
00548A OPEN WHEELED STAND (WITH TOOL TRAY) 27<br />
00548R OPEN WHEELED STAND (WITH TOOL TRAY) 29<br />
00550 RHINO ® COMPLETE MACHINE WITH 2-1/2" - 4"<br />
AUTOMATIC DIE HEADS AND DIES 29<br />
00551 ( 2-1/2" - 4") REAMER ASSEMBLY 29<br />
00558 SMALL DIE HEAD ADAPTOR - RHINO ® 38<br />
10<br />
101
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
00561 RHINO ® OPTIONAL 1/2" - 2" PACKAGE WITH 1/2" - 2"<br />
102<br />
AUTOMATIC DIE HEADS AND DIES 29<br />
00574 DIE HEAD, GROOVE & BEVEL ( 2-1/2"- 3" - RHINO ® ) 38<br />
00575 DIE HEAD, GROOVE & BEVEL ( 3-1/2"- 4" - RHINO ® ) 38<br />
00575A COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH AUTOMATIC BALL-DETENT DIE HEAD/DIES 28<br />
00575R COLLINS ® CLASSIC 22A THREADING MACHINE<br />
W/ RIDGID ® COMPATIBLE DIE HEAD/DIES 28<br />
00579 COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH SNAP-O-MATIC ® DIE HEADS/DIES ( 72 rpm, 115V) 28<br />
00585 COLLINS ® BASIC 22A THREADING MACHINE<br />
WITHOUT DIE HEAD/DIES 28<br />
00587 COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH SNAP-O-MATIC ® DIE HEADS/DIES ( 100 rpm, 115V) 28<br />
00592 COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH SNAP-O-MATIC ® DIE HEADS/DIES ( 230V) 28<br />
00596 COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH UNIQUAD ® DIE HEADS/DIES ( 72 rpm, 115V) 28<br />
00597 COLLINS ® CLASSIC 22A THREADING MACHINE<br />
WITH AUTOMATIC DIE HEADS/DIES ( 72 rpm, 115V) 28<br />
0<br />
01297 SWITCH ASSEMBLY 28<br />
0151-09SD PLIERS, SIDE-CUTTING 9" 76<br />
0153-01C SCREWDRIVER SET, 5-PIECE 77<br />
0153-02C SCREWDRIVER SET, 7-PIECE 77<br />
0153-42C MULTI-TOOL, 6-IN-1 77<br />
0155-25A TAPE MEASURE, 25' 78<br />
0155-16A TAPE MEASURE, 16' 78<br />
0156-12 HAMMER, 16 OZ 78<br />
0160-0001-1 OMNI MARKER, POWER 91<br />
0161-0001-1 OMNI MARKER, WATER 91<br />
0162-0001-1 OMNI MARKER, SANITARY 91<br />
01623 REPLACEMENT JAWS (SET 8) 28<br />
0163-0001-1 OMNI MARKER, TELEPHONE 91<br />
0164-0001-1 OMNI MARKER, GAS 91<br />
0165-0001-1 OMNI MARKER, CABLE TV 91<br />
0168-0001-1 OMNI MARKER, NON-POTABLE WATER 91<br />
0170-0001-1 UNI MARKER, POWER 91<br />
0171-0001-1 UNI MARKER, WATER 91<br />
0172-0001-1 UNI MARKER, SANITARY 91<br />
0173-0001-1 UNI MARKER, TELEPHONE 91<br />
0174-0001-1 UNI MARKER, GAS 91<br />
0175-0001-1 UNI MARKER, CABLE TV 91<br />
0178-0001-1 UNI MARKER, NON-POTABLE WATER 91<br />
01850 EXTERNAL NIPPLE CHUCK ( 1/2" - 2" SCH. 80 PIPE ) 31<br />
01850 EXTERNAL NIPPLE CHUCK ( 1/2" - 2" SCH. 80 PIPE ) 31<br />
01894 ( 1/8" - 2" ) REAMER CONE ONLY 29<br />
01922 ROCOOL THREAD CUTTING OIL - 1 GALLON 27, 32<br />
02265 DIES, SOM ( 1/2" & 3/4" PLASTIC - 22A, PANTHER ® ) 34, 36<br />
02350 FOOT SWITCH ( 230V ) 39<br />
02391 DIES, SOM ( 1" - 2" PLASTIC - 22A, PANTHER ® ) 34, 35, 36<br />
0251-08D PLIERS, DIAGONAL CUTTING 8" 76<br />
02581 DIES, UNIQUAD ® ( 1/8" PLASTIC - 22A, PANTHER ® ) 35<br />
02582 DIES, UNIQUAD ® ( 1/4" & 3/8" PLASTIC - 22A, PANTHER ® ) 35<br />
02583 DIES, UNIQUAD ® ( 1/2" & 3/4" PLASTIC - 22A, PANTHER ® ) 35<br />
02800 ARBOR, 5/16" 84, 86<br />
02801 ARBOR, 7/16" 84, 86<br />
02802 RETROFIT KIT, HOLE SAW KIT 84, 86<br />
02803 ADAPTERS, SMALL, HOLE SAW KIT 84, 86<br />
02804 ADAPTERS, LARGE, HOLE SAW KIT 84, 86<br />
02805 BUSINGS, HOLE SAW KIT 84, 86<br />
0351-08D PLIERS, LONG NOSE, SIDE-CUTTING 8" 76<br />
0354-01 WRENCH SET, 7-PIECE RATCHETING 77<br />
0358-11L GLOVES, HIGH DEXTERITY 79<br />
0451-10M PUMP PLIERS, 10" 76<br />
0451-12M PUMP PLIERS, 12" 76<br />
04510 CUTTER WHEEL 26, 27<br />
05600 DIE HEAD, RIDGID ® STYLE, PANTHER MANUAL ( 1/4" - 3/8" ) 35<br />
0652-11 UTILITY KNIFE 77<br />
0653-01L AVIATION SNIPS, LEFT CUT 80<br />
0653-01R AVIATION SNIPS, RIGHT CUT 80<br />
0653-01S AVIATION SNIPS, STRAIGHT CUT 80<br />
06676 DIES, SOM ( 3-1/2" - 4" PLASTIC ) 36<br />
09-03-54B STEP BIT 83<br />
1<br />
10220 FLASHLIGHT, FLEXIBLE LED 78<br />
10640 SUPERJACK PIPE STAND FOR 1/2" - 8" PIPE 27, 33<br />
10641 FOLDING SUPERJACK WITH V-HEAD 33<br />
10642 FOLDING SUPERJACK WITH BALL TRANSFER HEAD 33<br />
11006 INTERNAL/EXTERNAL DEBURRING TOOL FOR TUBES DIA. (1/8"-1-1/2") 6<br />
11006 TUBE DEBURRER - HEAVY DUTY FOR COPPER<br />
OR PLASTIC (1/8"-1-5/8") 52<br />
11006X TUBE DEBURRER - HEAVY DUTY FOR COPPER<br />
OR STAINLESS STEEL (1/8"-1-3/8") 52<br />
11008 STANDARD RIVETED EXPANDER HEAD ( 5/16" ) 7<br />
11035 STANDARD RIVETED EXPANDER HEAD ( 1-3/8" ) 7<br />
11052 STANDARD RIVETED EXPANDER HEAD ( 3/8" ) 7<br />
11053 STANDARD RIVETED EXPANDER HEAD ( 1/2" ) 7<br />
11054 STANDARD RIVETED EXPANDER HEAD ( 5/8" ) 7<br />
11055 STANDARD RIVETED EXPANDER HEAD ( 3/4" ) 7<br />
11056 STANDARD RIVETED EXPANDER HEAD ( 7/8" ) 7<br />
11057 STANDARD RIVETED EXPANDER HEAD ( 1" ) 7<br />
11058 STANDARD RIVETED EXPANDER HEAD ( 1-1/8" ) 7<br />
11062 STANDARD RIVETED EXPANDER HEAD ( 1-5/8" ) 7<br />
11078 A1 TUBE EXPANDER ( 1-3/8", 1-5/8", 2-1/8", 2-5/8", 3-1/8", 4-1/8") 7<br />
12-04-54A AUGER BIT, 3/4" TYPE A 83<br />
12000 ROCAM ® EXPANDER ( 1-3/4" ) 6<br />
1221-H SWITCH HANDLE 28<br />
12318 ROCAM ® EXPANDER SET ( 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8" ) 6<br />
12323 ROCAM ® EXPANDER SET ( 3/8", 1/2", 3/4", 1" ) 6<br />
12324 ROCAM ® EXPANDER SET ( 1/2", 5/8", 7/8", 1-1/8" ) 6<br />
12325 ROCAM ® EXPANDER SET ( 1/2", 5/8", 7/8" ) 6<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
12427 1" PEX CRIMPER 20<br />
12428 1/2" & 3/4" PEX CRIMPER COMBO 20<br />
12429 PEX STAINLESS CLAMP PINCER RATCHET TOOL 20<br />
12430 PEX RING REMOVAL TOOL 20<br />
13158 MINI-COLLINS ® ADAPTER FOR SUPER CUT 25<br />
1332 STORAGE CHEST, MOBILE, 14X32" 92<br />
13950 MINI-COLLINS ® DRIVE ( 230V ) 25<br />
14486 GO/NO GO CALIBRATION GAUGE<br />
( 3/8", 1/2", 5/8", 3/4" ASTM F1807 PEX ) 16, 17, 18, 19, 20<br />
14487 GO/NO GO CALIBRATION GAUGE ( 3/8", 1/2", 3/4", 1"<br />
ASTM F1807 PEX ) 16, 17, 18, 19, 20<br />
149H BIT SET, EZ BORE CONDUIT & PIPE 83<br />
149H-1 E-Z BORE BIT, 1" 83<br />
149H-1-1/8 E-Z BORE BIT, 1-1/8" 83<br />
149H-1-1/4 E-Z BORE BIT, 1-1/4" 83<br />
149H-1-3/8 E-Z BORE BIT, 1-3/8" 83<br />
149H-1-1/2 E-Z BORE BIT, 1-1/2" 83<br />
149H-1-3/4 E-Z BORE BIT, 1-3/4" 83<br />
149H-2 E-Z BORE BIT, 2" 83<br />
149H-2-1/8 E-Z BORE BIT, 2-1/8" 83<br />
149H-2-1/4 E-Z BORE BIT, 2-1/4" 83<br />
149H-2-9/16 E-Z BORE BIT, 2-9/16" 83<br />
149H-3 E-Z BORE BIT, 3" 83<br />
149H-3-5/8 E-Z BORE BIT, 3-5/8" 83<br />
149H-4-5/8 E-Z BORE BIT, 4-5/8" 83<br />
150Q PULLING GRIP 83<br />
15031V COMPACT PRESS JAW ( 1/2" COPPER ) 16, 17, 18<br />
15032V COMPACT PRESS JAW ( 3/4" COPPER ) 16, 17, 18<br />
15033V COMPACT PRESS JAW ( 1" COPPER ) 16, 17, 18<br />
15222X ROPRESS PRESS JAW ( 1/2" COPPER ) 19<br />
15223X ROPRESS PRESS JAW ( 3/4" COPPER ) 19<br />
15224X ROPRESS PRESS JAW ( 1" COPPER ) 19<br />
15225X ROPRESS PRESS JAW ( 1-1/4" COPPER ) 19<br />
15226X ROPRESS PRESS JAW ( 1-1/2" COPPER ) 19<br />
15227X ROPRESS PRESS JAW ( 2" COPPER ) 19<br />
15251X ROPRESS PRESS JAW ( 3/8" PEX ) 19<br />
15252X ROPRESS PRESS JAW ( 1/2" PEX ) 19<br />
15253X ROPRESS PRESS JAW ( 5/8" PEX ) 19<br />
15254X ROPRESS PRESS JAW ( 3/4" PEX ) 19<br />
16-04-54A AUGER BIT, 1" TYPE A 83<br />
15256X ROPRESS PRESS JAW ( 1-1/4" PEX ) 19<br />
15930 COMPACT PRESS JAW ( 3/8" PEX ) 16, 17, 18<br />
15931 COMPACT PRESS JAW ( 1/2" PEX ) 16, 17, 18<br />
15932 COMPACT PRESS JAW ( 5/8" PEX ) 16, 17, 18<br />
15933 COMPACT PRESS JAW ( 3/4" PEX ) 16, 17, 18<br />
15934 COMPACT PRESS JAW ( 1" PEX ) 16, 17, 18<br />
15935 COMPACT PRESS JAW ( 1-1/4" PEX ) 16, 17, 18<br />
16001 ROPRESS COMPACT PRESS TOOL, NO JAWS 16<br />
16001 ROPRESS COMPACT PRESS TOOL, NO JAWS 16<br />
16002 ROPRESS COMPACT PRESS TOOL ( 1/2" - 1" )<br />
JAWS, BATTERY, CHARGER 16<br />
16013 CARRY CASE, COMPACT 16<br />
16101 ROPRESS CORDLESS TOOL - NO JAWS 17<br />
800.545.7698 www.rothenberger-usa.com<br />
16102 ROPRESS CORDLESS TOOL ( 1/2" - 2" JAWS, BATTERY, CHARGER ) 17<br />
16201 ROPRESS CORDED TOOL - NO JAWS 18<br />
16202 ROPRESS CORDED TOOL ( 1/2" - 2", JAWS,<br />
BATTERY, CHARGER ) 18<br />
1923 CRIMPING/STRIPPING COMBO TOOL 80<br />
1927 CRIMPING/STRIPPING COMBO TOOL 80<br />
1940 CONDUIT CUTTER, FLEX SPLITTER 86<br />
1941-1 REPLACEMENT BLADE, 1940 86<br />
1941-5 REPLACEMENT BLADE PACK, 1940 86<br />
2<br />
20160 DIE HEAD, MANUAL ( 1/2" - 1" BOLT - 2SE, 50R ) 36<br />
20162 DIE HEAD, MANUAL ( 1-1/8" - 1-1/2" BOLT - 2SE, 50R ) 36<br />
20165 DIE HEAD, MANUAL ( 1/4"-3/8" NPT - 2SE) 35<br />
20171 DIE HEAD, MANUAL ( 1/2" - 1-1/4" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
20172 DIE HEAD, MANUAL ( 1-1/2" - 3" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
20533 LOW INDENT JAWS FOR PLASTIC COATED PIPE (SET 8) 28<br />
21575 UNIDRILL ® 42 ( 3/8" - 1-5/8" ) 8<br />
21652 DEBURRING BLADE SIZES 1, 2, OR 3 ( 1 PK. ) 45<br />
21652 HSS DEBURRING BLADE NO. 1 UNIVERSAL ( 1 PK. ) 52<br />
21652B DEBURRING BLADE SIZES 1, 2, OR 3 ( 10 PK. ) 44, 45<br />
21652B HSS DEBURRING BLADE NO. 1 UNIVERSAL ( 10 PK. ) 52<br />
21655 DEBURRING TOOL WITH DEBURRING BLADE NO. 1 52<br />
21660 DEBURRING TOOL WITH HSS DEBURRING BLADE 52<br />
22016 TEE EXTRACTOR HOOK & BELL ( 5/8" ) 8<br />
22035 TEE EXTRACTOR HOOK & BELL ( 1-3/8" ) 8<br />
22038 TEE EXTRACTOR HOOK & BELL ( 1-1/2" ) 8<br />
22050 TEE EXTRACTOR HOOK & BELL ( 2" ) 8<br />
22054 TEE EXTRACTOR HOOK & BELL ( 2-1/8" ) 8<br />
22060 TEE EXTRACTOR HOOK & BELL ( 3/8" ) 8<br />
22061 TEE EXTRACTOR HOOK & BELL ( 1/2" ) 8<br />
22062 TEE EXTRACTOR HOOK & BELL ( 3/4" ) 8<br />
22063 TEE EXTRACTOR HOOK & BELL ( 7/8" ) 8<br />
22064 TEE EXTRACTOR HOOK & BELL ( 1" ) 8<br />
22065 TEE EXTRACTOR HOOK & BELL ( 1-1/8" ) 8<br />
22066 TEE EXTRACTOR HOOK & BELL ( 1-1/4" ) 8<br />
22068 TEE EXTRACTOR HOOK & BELL ( 1-5/8" ) 8<br />
22069 TEE EXTRACTOR HOOK & BELL ( 1-3/4" ) 8<br />
22080 EXTRACTOR CAM PINCER ( 1/2" - 1-1/2" ) 8<br />
22081 EXTRACTOR RATCHET ( 3/8" - 1-3/4" ) 8<br />
22124 TEE EXTRACTOR SET ( 1/2", 5/8", 7/8", 1-1/8" ) 8<br />
22216 TEE EXTRACTOR HOOK ( 5/8" ) 8<br />
22235 TEE EXTRACTOR HOOK ( 1-3/8" ) 8<br />
222402 PROFESSIONAL FLARING TOOL, 45°<br />
Numerical Index<br />
( 1/16", 1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" ) 10<br />
22244 TEE EXTRACTOR HOOK ( 1-3/4" ) 8<br />
22246 TEE EXTRACTOR HOOK ( 2" ) 8<br />
22254 TEE EXTRACTOR HOOK ( 2-1/8" ) 8<br />
22260 TEE EXTRACTOR HOOK ( 3/8" ) 8<br />
222601 UNIVERSAL FLARING TOOL, 45° ( 3/16" - 5/8" ) / (4-16mm) 10<br />
22261 TEE EXTRACTOR HOOK ( 1/2" ) 8<br />
22263 TEE EXTRACTOR HOOK ( 3/4" ) 8<br />
10<br />
103
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
22264 TEE EXTRACTOR HOOK ( 7/8" ) 8<br />
22265 TEE EXTRACTOR HOOK ( 1" ) 8<br />
22266 TEE EXTRACTOR HOOK ( 1-1/8" ) 8<br />
22267 TEE EXTRACTOR HOOK ( 1-1/4" ) 8<br />
22268 TEE EXTRACTOR HOOK ( 1-1/2" ) 8<br />
22270 TEE EXTRACTOR HOOK ( 1-5/8" ) 8<br />
23000 MAXI BENDER - TOOL ONLY 12<br />
23001 MAXI BENDER SUPPORT WITH R/L FORMERS 12<br />
23010 FORMERS FOR COPPER/ALUMINUM ( 3/8" ) 12<br />
23011 FORMERS FOR COPPER/ALUMINUM ( 1/2" ) 12<br />
23012 FORMERS FOR COPPER/ALUMINUM ( 5/8" ) 12<br />
23013 FORMERS FOR COPPER/ALUMINUM ( 3/4" ) 12<br />
23014 FORMERS FOR COPPER/ALUMINUM ( 7/8" ) 12<br />
23022X MAXI BENDER SET ( 3/8", 1/2", 5/8", 3/4", 7/8" ) 12<br />
23064 MAXI BENDER MSR SET ( 1/2", 3/4", 1" ) PEX 12<br />
24001 BENDING FORMER ( 3/16" ) 11<br />
24002 BENDING FORMER ( 1/4" ) 11<br />
24003 BENDING FORMER ( 5/16" ) 11<br />
24006 BENDING FORMER ( 3/8" ) 11<br />
24008 BENDING FORMER ( 1/2" ) 11<br />
24130 TUBE BENDER RATCHETING HANDLE 11<br />
24134 TUBE BENDER SET ( 1/4", 5/16", 3/8", 1/2" ) 11<br />
2448 STORAGE CHEST, MOBILE, 24X48" 92<br />
24504 ROBEND ® H+W PLUS SET ( 1/2", 5/8", 7/8" ) 13<br />
24516 ROBEND ® H+W PLUS ( 5/8" ) 13<br />
24519 ROBEND ® H+W PLUS ( 3/4" ) 13<br />
24522 ROBEND ® H+W PLUS ( 7/8" ) 13<br />
24551 ROBEND ® H+W PLUS ( 3/8" ) 13<br />
24552 ROBEND ® H+W PLUS ( 1/2" ) 13<br />
25001 ROBEND ® 3000 SET ( 1/2", 5/8", 3/4", 7/8", 1", 1-1/8" ) 13, 14<br />
25120 BENDING SPRAY 5.3 oz. (150 ml) 13<br />
25131 STANDARD TUBE BENDER ( 5/16" ) 13<br />
25136 STANDARD TUBE BENDER ( 5/8" ) 13<br />
25151 MINIBEND ( 1/4", 5/16", 3/8" ) 12<br />
25616 ROBEND ® 3000 ( 5/8" ) 14<br />
25619 ROBEND ® 3000 ( 3/4" ) 14<br />
25622 ROBEND ® 3000 ( 7/8" ) 14<br />
25625 ROBEND ® 3000 ( 1" ) 14<br />
25626 ROBEND ® 3000 ( 1-1/8" ) 14<br />
25652 ROBEND ® 3000 ( 1/2" ) 14<br />
25913 TUBE BENDER PRO ( 1/2" ) 13<br />
25914 TUBE BENDER PRO ( 3/4" ) 13<br />
26022 ROFLARE ® FLARING TOOL DOUBLE ( 6 - 16 mm ) 9<br />
26032 ROFLARE ® FLARING TOOL 37º SINGLE<br />
104<br />
( 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" ) 9<br />
26033 ROFLARE ® FLARING TOOL SINGLE/DOUBLE<br />
( 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" ) 9<br />
26034 ROFLARE ® / ROFORM ® DOUBLE FLARE ADAPTOR<br />
( 1/16", 1/4", 5/16", 3/8", 1/2" ) 9<br />
26036 ROFLARE ® FLARING TOOL SINGLE<br />
( 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" ) 9<br />
26038 ROFLARE ® FLARING TOOL SINGLE ( 6 - 16 mm ) 9<br />
26039 ROFLARE ® / ROFORM ® ADAPTOR, 180º 9<br />
26089P ROFORM ® SET CARRY CASE 9<br />
26710 ROFORM ® SET ( 6 - 8 - 10 - 12 - 15 - 16 mm) 9<br />
26711 ROFORM ® SET ( 6 - 16 mm ) 9<br />
26715 ROFORM ® SET ( 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" ) 9<br />
27181 EXTRACTOR RATCHET ( 2" - 4-1/4" ) 7, 8<br />
28154 KNOCKOUT PUNCH, 1/2" 80<br />
28156 KNOCKOUT PUNCH, 3/4" 80<br />
28158 KNOCKOUT PUNCH, 1" 80<br />
28160 KNOCKOUT PUNCH, 1-1/4" 80<br />
3<br />
30008 STEP BIT, 1-1/8" ELECTRICIANS 82<br />
301A SAW, KEYHOLE 79<br />
3048 STORAGE CHEST, MOBILE, 30X48" 92<br />
31043 FLAME REFLECTOR 62, 63<br />
322-013 SAW, PVC, 13" 79<br />
322-018 SAW, PVC, 18" 79<br />
322-113 REPLACEMENT BLADE 79<br />
322-118 REPLACEMENT BLADE 79<br />
33AR-6 SPADE BIT KIT 83<br />
333A HACKSAW, 12" HEAVY DUTY 79<br />
34401 STEP BIT, 1/2" MULTI-HOLE 82<br />
34403 STEP BIT, 7/8" MULTI-HOLE 82<br />
35012 ROFIRE SWIVEL PRO DOUBLE BARREL 63<br />
35014 ROFIRE SWIVEL PRO CYCLONE 63<br />
35016 ROFIRE SWIVEL PRO CYCLONE PIEZO 63<br />
353-123 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-156 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-234 RECIPROCATING BLADE, HCS, TAPER 86<br />
353-318 RECIPROCATING BLADE, BI-METAL, SCROLL 86<br />
353-345 RECIPROCATING BLADE, BIMETAL, TAPER 86<br />
353-418 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-614 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-618 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-624 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-646 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-656 RECIPROCATING BLADE, BIMETAL, TAPER 86<br />
353-804 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-814 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-818 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-956 RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
353-966 RECIPROCATING BLADE, BIMETAL, TAPER 86<br />
353-969 RECIPROCATING BLADE, BIMETAL, TAPER 86<br />
35415 ROFIRE HAND TORCH 62<br />
35431 SUPER FIRE 3 TORCH 62<br />
35455 PIN-POINT BURNER 62<br />
35456 STANDARD BURNER 62<br />
35457 SWIRL-FLAME BURNER 62<br />
35458 HOT-AIR BURNER 62<br />
35459 SOFT-FLAME BURNER 62<br />
35644X SUPER FIRE 2 BRAZING TORCH, INCLUDES SWIRL FLAME BURNER 63<br />
35658 PENCIL FLAME TORCH TIP 63<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
35884 STEP BIT KIT, KWIK STEPPER 82<br />
35936 PLASTIC CASE 82<br />
35661 SWIRL FLAME TORCH TIP 63<br />
3660 BOX, SLANT TOP 92<br />
36701 ROTHERM 2000 SOFT-SOLDERING UNIT 63<br />
36710 ROD ELECTRODE WITH HOLDERS ( PAIR ) 63<br />
36711 FLAT ELECTRODE WITH HOLDERS ( PAIR ) 63<br />
36715 ROTHERM 2000 STEEL CASE 63<br />
36720 ROD ELECTRODES ( PAIR ) 63<br />
36721 FLAT ELECTRODES ( PAIR ) 63<br />
37155 ARBOR WITH PIILOT DRILL 85<br />
37156 ARBOR WITH PIILOT DRILL 85<br />
37157 ARBOR WITH PIILOT DRILL 85<br />
38522 ARBOR WITH PIILOT DRILL 85<br />
4<br />
40231 TOOL BAG 53<br />
438-2X FISH TAPE, FLAT-STEEL 88<br />
438-5H FISH TAPE, STEEL 88<br />
45001 ROGROOVER MOUNTING KIT FOR 22A 28, 31<br />
45002 ROGROOVER MOUNTING KIT FOR RIDGID ® 300 31<br />
45004 ROGROOVER MOUNTING KIT, RHINO ® 29, 31<br />
45005 ROGROOVER MOUNTING KIT, 44A 31<br />
45225 SOLDERING PASTE 63<br />
46500 FLASHLIGHT, POCKET 78<br />
4860 BOX, FLAT-TOP 93<br />
4XT-54 DVERSIBIT BIT EXTENSION 83<br />
5<br />
50010 PROPANE 63<br />
50012 MAP-PRO 63<br />
50032 ROCUT 32 REPLACEMENT BLADE 48<br />
50042 ROCUT 42 REPLACEMENT BLADE 48<br />
50063 ROCUT 63 REPLACEMENT BLADE 48<br />
503 CASTERS, 6" SWIVEL 92<br />
52000 ROCUT 42TC ( 1-1/4") 47<br />
52005 ROCUT 26TC PEX CUTTER ( 1" ) 48<br />
52010 ROCUT 50TC ( 1-1/2" ) 47<br />
52011 50TC SPARE STAINLESS STEEL BLADE 47<br />
52015 ROCUT 75TC ( 2-1/2") 47<br />
52016 75TC SPARE STAINLESS STEEL BLADE 47<br />
52030 ROCUT 63TC ( 2" ) 47<br />
52031 63TC SPARE STAINLESS STEEL BLADE 47<br />
52040 ROCUT 32TC PEX CUTTER ( 1-1/4" ) 48<br />
52041 ROCUT 32TC REPLACEMENT BLADE 48<br />
52042 42TC REPLACEMENT BLADE 47<br />
52091 DIE HEAD ( 1/2" - 2" NPT - 1SE ) 35<br />
521A LOCATOR, WIRE & VALVE 91<br />
52176 18V LITHIUM BATTERY ( 3 AMP ) 16, 17, 18, 19<br />
52177 18V LITHIUM BATTERY ( 1.5 amp ) 16, 17, 18, 19<br />
52178 18V LITHIUM BATTERY CHARGER ( 120 V ) 16, 17, 18, 19<br />
800.545.7698 www.rothenberger-usa.com<br />
52500 AUTOMATIC DIE HEAD ( 1/2" - 2" ) 27, 35<br />
55054D CUTTER WHEEL, SIZE 2 ( 3 PK. ) 44<br />
55089 DIRECT CUT PEX SHEAR ( 1-3/8" ) 48<br />
55090E ROCUT 32 ECONOMY SHEAR ( 1" ) 48<br />
55091E ROCUT 42 ECONOMY SHEAR ( 1-1/4" ) 48<br />
55095E ROCUT 63 ECONOMY SHEAR ( 2" ) 48<br />
56051 WHEELED STAND 26<br />
56265 DIE HEAD, RIDGID ® STYLE, 50R AUTOMATIC ( 1/2" - 2" ) 35<br />
56383 DIES, RIDGID ® STYLE, H.S. STEEL ( 1/4" - 3/8" NPT ) 35<br />
56511 ROPOWER 50R AND SUPERTRONIC 2SE MOUNTING KIT 26, 31<br />
56512 ROGROOVER MOUNTING KIT FOR 4SE 27, 31<br />
5660L CABINET, UTILITY 93<br />
5680204 SPRING REPLACEMENT 47<br />
5687504 75TC SPRING REPLACEMENT 47<br />
58182 TRIPOD STAND 14<br />
58182 R 600 COLLAPSABLE TRI-POD STAND 72<br />
59000 PLASTICUT REPLACEMENT BLADE ( 1/2", 3/4" - 3 PK. ) 48<br />
59001 PLASTICUT REPLACEMENT BLADE ( 1" - 3 PK. ) 48<br />
59060 PLASTICUT PEX & CPVC CUTTER ( 1/2" ) 48<br />
59070 PLASTICUT PEX & CPVC CUTTER ( 3/4" ) 48<br />
59080 PLASTICUT PEX & CPVC CUTTER ( 1" ) 48<br />
59912 ALLOY DIE SET FOR DIE HEAD 64350 (ONLY 2-1/2"- 4" NPT) 27, 35<br />
6<br />
60200 RP50 TEST PUMP 56<br />
60201 RE50-S REPAIR KIT 56<br />
60250 TP25 TEST PUMP 56<br />
60251 TP25 REPAIR KIT 56<br />
603 CASTERS, 6" SWIVEL, (2 RIDGID, 2 SWIVEL) 92<br />
61PTS-5/8 BORING BIT, 5/8" SHORTY WOOD 82<br />
61PTS-3/4 BORING BIT, 3/4" SHORTY WOOD" 82<br />
61PTS-7/8 BORING BIT, 7/8" SHORTY WOOD 82<br />
61PTS-1 BORING BIT, 1" SHORTY WOOD 82<br />
61/62PTS-1-1/8 BORING BIT, 1-1/8" BIG SHANK SHORTY WOOD 82<br />
61/62PTS-1-1/4 BORING BIT, 1-1/4" BIG SHANK SHORTY WOOD 82<br />
62PTS-3/4 BORING BIT, 3/4" BIG SHANK SHORTY WOOD 82<br />
62PTS-7/8 BORING BIT, 7/8" BIG SHANK SHORTY WOOD 82<br />
62PTS-1 BORING BIT, 1" BIG SHANK SHORTY WOOD 82<br />
62202 ROFROST ® TURBO ( 1-1/4" ) 58<br />
62205 ROFROST ® TURBO ( 2" ) 58<br />
62211 ROFROST ® REDUCTION INSERT 1-1/4" ( 1/2" ) 58<br />
62214 ROFROST ® REDUCTION INSERT 1-1/4" ( 7/8" ) 58<br />
62215 ROFROST ® REDUCTION INSERT 1-1/4" ( 3/4" ) 58<br />
62216 ROFROST ® REDUCTION INSERT 1-1/4" ( 1-3/8" ) 58<br />
62217 ROFROST ® REDUCTION INSERT 1-1/4" ( 3/8" ) 58<br />
62219 ROFROST ® REDUCTION INSERT 1-1/4" ( 5/8" ) 58<br />
62224 ROFROST ® REDUCTION INSERT 1-1/4" ( 3/4" ) 58<br />
62226 ROFROST ® REDUCTION INSERT 1-1/4" ( 1" ) 58<br />
62227 ROFROST ® REDUCTION INSERT 1-1/4" ( 1-1/8" ) 58<br />
62230 EXPANSION SET FOR COPPER<br />
Numerical Index<br />
( O.D. 1/2", 5/8", 7/8", AND STEEL DIA. 1/4", 1/2" ) 58<br />
62231 ROFROST ® REDUCTION INSERT 2" ( 3/4" ) 58<br />
10<br />
105
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
62232 ROFROST ® REDUCTION INSERT 2" ( 1-1/8" ) 58<br />
62233 ROFROST ® REDUCTION INSERT 2" ( 1-1/4" ) 58<br />
62234 ROFROST ® REDUCTION INSERT 2" ( 1-3/8" ) 58<br />
62235 ROFROST ® REDUCTION INSERT 2" ( 1-1/4" ) 58<br />
62236 ROFROST ® REDUCTION INSERT 2" ( 1-1/2" ) 58<br />
62237 ROFROST ® REDUCTION INSERT 2" ( 2-1/8" ) 58<br />
62291 ROFROST ® HEAT CONDUCTIVE PAST ( 150ml ) 58<br />
63004 SUPERTRONIC 2SE THREADING MACHINE WITH<br />
106<br />
AUTO DIE HEAD WITH NPT ALLOY DIES ( 1/2" - 2" ) 26<br />
63005 ROPOWER 50R THREADING MACHINE WITH<br />
AUTO DIE HEAD WITH NPT ALLOY DIES ( 1/2" - 2" ) 26<br />
63006 SUPERTRONIC 4SE THREADING MACHINE ( 1/2" - 4" ) 27<br />
645-5/8 CARBIDE-TIPPED HOLE CUTTER, 5/8" 84<br />
645-11/16 CARBIDE-TIPPED HOLE CUTTER, 11/16" 84<br />
645-3/4 CARBIDE-TIPPED HOLE CUTTER, 3/4" 84<br />
645-13/16 CARBIDE-TIPPED HOLE CUTTER, 13/16" 84<br />
645-7/8 CARBIDE-TIPPED HOLE CUTTER, 7/8" 84<br />
645-1 CARBIDE-TIPPED HOLE CUTTER, 1" 84<br />
645-1-1/16 CARBIDE-TIPPED HOLE CUTTER, 1-1/16" 84<br />
645-1-1/8 CARBIDE-TIPPED HOLE CUTTER, 1-1/8" 84<br />
645-1-7/32 CARBIDE-TIPPED HOLE CUTTER, 1-7/32" 84<br />
645-1-1/4 CARBIDE-TIPPED HOLE CUTTER, 1-1/4" 84<br />
645-1-5/16 CARBIDE-TIPPED HOLE CUTTER, 1-5/16" 84<br />
645-1-3/8 CARBIDE-TIPPED HOLE CUTTER, 1-3/8" 84<br />
645-1-7/16 CARBIDE-TIPPED HOLE CUTTER, 1-7/16" 84<br />
645-1-1/2 CARBIDE-TIPPED HOLE CUTTER, 1-1/2" 84<br />
645-1-3/4 CARBIDE-TIPPED HOLE CUTTER, 1-3/4" 84<br />
645-2 CARBIDE-TIPPED HOLE CUTTER, 2" 84<br />
645-2-1/8 CARBIDE-TIPPED HOLE CUTTER, 2-1/8" 84<br />
645-2-1/4 CARBIDE-TIPPED HOLE CUTTER, 2-1/4" 84<br />
645-2-3/8 CARBIDE-TIPPED HOLE CUTTER, 2-3/8" 84<br />
645-2-1/2 CARBIDE-TIPPED HOLE CUTTER, 2-1/2" 84<br />
645-2-5/8 CARBIDE-TIPPED HOLE CUTTER, 2-5/8" 84<br />
645-3 CARBIDE-TIPPED HOLE CUTTER, 3" 84<br />
64001 QUICK FREEZE SPRAY REPLACEMENT ( 17.5 OZ. / 500 G ) 59<br />
64002 FOAM PIPE JACKET REPLACEMENT, 2 PIECES 59<br />
64004 FREEZE-PAK KIT 59<br />
64350 AUTOMATIC DIE HEAD ( 2-1/2" - 4" ) 27, 35<br />
65008 RONAL ® SPRAY CAN 20.3 oz. (600 ml) 32<br />
65013 RONAL ® SYN SPRAY CAN 20.3 oz. (600 ml) 32<br />
65018 RONOL ® CUTTING FLUID 6.7 oz. (200 ml) 22, 23, 24, 32<br />
65030 ROFROST CO2 PIPE FREEZING SET 59<br />
65032 HANDLE WITH FEED VALVE AND BAYONET CONNECTION 59<br />
65033 HIGH PRESSURE HOSE ( 6-1/2 FT. ) 59<br />
65035 ROFROST ® FREEZER HEAD SIZE 1 59<br />
65036 ROFROST ® FREEZER HEAD SIZE 2 59<br />
65037 ROFROST ® FREEZER HEAD SIZE 3 59<br />
65038 ROFROST ® FREEZER HEAD SIZE 4 59<br />
65039 ROFROST ® FREEZER HEAD SIZE 5 59<br />
65040 ROFROST ® FREEZER HEAD SIZE 6 59<br />
65041 ROFROST ® FREEZER HEAD SIZE 7 59<br />
65042 ROFROST ® FREEZER HEAD SIZE 8 59<br />
65043 ROFROST ® FREEZER HEAD SIZE 9 59<br />
65044 ROFROST ® FREEZER HEAD SIZE 10 59<br />
65048 NOZZLE AND FILTER PIECE FOR FEED VALVE 59<br />
66PT-3/4 BORING BIT, 3/4" WOOD 82<br />
66PT-7/8 BORING BIT, 7/8" WOOD 82<br />
66PT-1 BORING BIT, 1" WOOD 82<br />
66PT-1-1/8 BORING BIT, 1-1/8" WOOD 82<br />
66PT-1-1/4 BORING BIT, 1-1/4" WOOD 82<br />
660 CARBIDE-TIPPED CUTTER KIT, STAINLESS STEEL 84<br />
668 RACK, CONDUIT & PIPE STORAGE 93<br />
69001 ROCAM ® CAMERA SONDE LOCATOR 71<br />
69002 RECORDING DEVICE 69<br />
69002 ROCAM ® PLUS RECORDING DEVICE 70<br />
69120 ROCAM ® PLUS CHARGER 70<br />
69120 ROCAM ® PLUS BATTERY CHARGER 70<br />
69361 ROSCOPE MASTER UNIT 68<br />
69364 GOOSENECK ( TEC MODULE ) 68<br />
69372 ROSCOPE PLUMBING ( PIPE MODULE 25/72 IN CASE ) 68<br />
69376 ROSCOPE INDUSTRIAL ( MICRO MODULE ) 68<br />
69379 ROSCOPE ACCESSORIES ( HOOK, MIRROR, MAGNET ) 10MM 68<br />
69380 ROSCOPE ACCESSORIES ( MIRROR, MAGNET ) 5.5 MM 68<br />
69385 ROSCOPE UTILITY ( PIPE MODULE 20/9 ) 68<br />
69386 ROSCOPE CHARGER 68<br />
69480 ROCAM ® REPLACEMENT CABLE 69<br />
69550 ROCAM ® REPLACEMENT BATTERY 69<br />
69570 ROCAM ® PLUS REPLACEMENT BATTERY 70<br />
69570 ROCAM ® PLUS BATTERY 70<br />
69635NT ROCAM ® CORDLESS COLOR WITH TRANSMITTER<br />
AND DISTANCE COUNTER 69<br />
69701NT ROCAM ® PLUS REPLACEMENT HEAD 70<br />
69825NT ROCAM ® PLUS CORDLESS COLOR 325' WITH<br />
TRANSMITTER AND DISTANCE COUNTER 70<br />
69850 ROCAM ® PLUS TRANSMITTER 70<br />
7<br />
70007B CUTTER WHEEL ( 2 PK. ) 42<br />
70007X CUTTER WHEEL ( 10 PK. ) 42<br />
70010 ROTRAC 28 TUBE CUTTER ( 1/8" - 1-1/8" O.D. ) 42<br />
70011 ROTRAC 42 TUBE CUTTER ( 1/4" - 1-5/8" O.D. ) 42<br />
70012 ROTRAC 20PL TUBE CUTTER FOR PLASTIC PIPE ( 1/8" - 3/4" ) 42<br />
70013 ROTRAC 32PL TUBE CUTTER FOR PLASTIC PIPE ( 3/16" - 1-1/4" ) 42<br />
70015 MINI MAX ( 1/8" - 1-1/8" ) 43<br />
70017B CUTTER WHEEL ( 2 PK. ) 43, 44, 45<br />
70017D CUTTER WHEEL ( 5 PK. ) 43, 44, 45<br />
70018 ROTRAC 42 TUBE CUTTER FOR FLEXIBLE GAS PIPE (1/4"-1-5/8") 42<br />
70020 ROTRAC 28 PLUS TUBE CUTTER ( 1/8" - 1-1/8" O.D. ) 42<br />
70021 ROTRAC 28 PLUS TUBE CUTTER ( 1/4" - 1-5/8" O.D. ) 42<br />
70027 35 PRO TUBE CUTTER ( 1/4" - 1-3/8" ) 45<br />
70028D CUTTER WHEEL, SIZE 1 ( 3 PK. ) 44<br />
70029 42 PRO TUBE CUTTER ( 1/4" - 1-5/8" ) 45<br />
70030 AUTOMATIC SIZE 1 TUBE CUTTER ( 1/8"- 2-5/8" ) 44<br />
70031 AUTOMATIC PL PLASTIC TUBE CUTTER SIZE 1 ( 1/8" - 2-5/8" ) 44<br />
70032 AUTOMATIC PL PLASTIC TUBE CUTTER SIZE 2 ( 2" - 5" ) 44<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
70041 AXLE AND SCREW 43, 45<br />
70045 STEEL PIPE CUTTER ( 2" ) 24, 46<br />
70046D CUTTER WHEEL ( 1-1/4" 3 PK. ) 46<br />
70051D STEEL PIPE CUTTER ( 1-1/4" ) 23, 46<br />
70054 CUTTER WHEEL FOR CAST IRON ( 2" ) 46<br />
70055 35 PRO SS TUBE CUTTER ( 1/4" - 1-3/8" ) 45<br />
70056 CUTTER WHEEL SS ( 1 PK. ) 45<br />
70056D CUTTER WHEEL, STAINLESS STEEL, ( 5 PK. ) 43, 45<br />
70057D CUTTER WHEEL SIZES 2 OR 3 ( 2 PK. ) 44<br />
70060 STEEL PIPE CUTTER ( 2" - 4" ) 46<br />
70061 CUTTER WHEEL ( 4" - 2 PK. ) 46<br />
70065 TUBE CUTTER 50 ( 1/2" - 2" ) 43<br />
70070 42 PRO SS TUBE CUTTER ( 1/4" - 1-5/8" ) 45<br />
70075 TUBE DEBURRER - HEAVY DUTY FOR COPPER OR<br />
STAINLEES STEEL ( 3/8" - 2" ) 52<br />
70086 PIPE CUTTER FOR STAINLESS STEEL ( 1/8" - 1-1/4" ) 46<br />
70087 PIPE CUTTER FOR STAINLESS STEEL ( 1/4" - 2" ) 46<br />
70088 CUTTER WHEEL FOR STAINLESS STEEL ( 1-1/4" ) 46<br />
70089 CUTTER WHEEL FOR STAINLESS STEEL ( 2" ) 46<br />
70105 MINICUT 2000 TUBE CUTTER ( 1/8" - 7/8" ) 43<br />
70109 42 PRO MSR TUBE CUTTER ( 1/4" - 1-5/8" ) 45<br />
70115 ALUMINUM OFFSET PIPE WRENCH ( 14" ) 51<br />
70116 ALUMINUM OFFSET PIPE WRENCH ( 18" ) 51<br />
70142 AUTOMATIC SIZE 2 TUBE CUTTER ( 2"- 5" ) 44<br />
70143 AUTOMATIC SIZE 3 TUBE CUTTER ( 4"- 6-5/8" ) 44<br />
70149 AXLE AND SCREW 44<br />
70150 HEAVY DUTY PIPE WRENCH ( 8" ) 50<br />
70151 HEAVY DUTY PIPE WRENCH ( 10" ) 50<br />
70152 HEAVY DUTY PIPE WRENCH ( 12" ) 50<br />
70153 HEAVY DUTY PIPE WRENCH ( 14" ) 50<br />
70154 HEAVY DUTY PIPE WRENCH ( 18" ) 50<br />
70155 HEAVY DUTY PIPE WRENCH ( 24" ) 50<br />
70156 HEAVY DUTY PIPE WRENCH ( 36" ) 50<br />
70157 HEAVY DUTY PIPE WRENCH ( 48" ) 50<br />
70159 ALUMINUM PIPE WRENCH ( 10" ) 50<br />
70160 ALUMINUM PIPE WRENCH ( 14" ) 50<br />
70161 ALUMINUM PIPE WRENCH ( 18" ) 50<br />
70162 ALUMINUM PIPE WRENCH ( 24" ) 50<br />
70163 ALUMINUM PIPE WRENCH ( 36" ) 50<br />
70164 ALUMINUM PIPE WRENCH ( 48" ) 50<br />
70166 HEAVY DUTY END PIPE WRENCH ( 10" ) 51<br />
70167 HEAVY DUTY END PIPE WRENCH ( 14" ) 51<br />
70170 PIPE WRENCH SPRINGS ( 8" ) 50<br />
70171 PIPE WRENCH SPRINGS ( 10" ) 50<br />
70172 PIPE WRENCH SPRINGS ( 12" ) 50<br />
70173 PIPE WRENCH SPRINGS ( 14" ) 50<br />
70174 PIPE WRENCH SPRINGS ( 18" ) 50<br />
70175 PIPE WRENCH SPRINGS ( 24" ) 50<br />
70176 PIPE WRENCH SPRINGS ( 36" ) 50<br />
70177 PIPE WRENCH SPRINGS ( 48" ) 50<br />
70180 PIPE WRENCH NUT ( 8" ) 50<br />
70181 PIPE WRENCH NUT ( 10" ) 50<br />
70182 PIPE WRENCH NUT ( 12" ) 50<br />
800.545.7698 www.rothenberger-usa.com<br />
Numerical Index<br />
70183 PIPE WRENCH NUT ( 14" ) 50<br />
70184 PIPE WRENCH NUT ( 18" ) 50<br />
70185 PIPE WRENCH NUT ( 24" ) 50<br />
70186 PIPE WRENCH NUT ( 36" ) 50<br />
70187 PIPE WRENCH NUT ( 48" ) 50<br />
70188 CUTTER WHEEL ( 1 PK. ) 45<br />
70190 PIPE WRENCH HEEL JAW AND PIN ( 8" ) 50<br />
70191 PIPE WRENCH HEEL JAW AND PIN ( 10" ) 50<br />
70192 PIPE WRENCH HEEL JAW AND PIN ( 12" ) 50<br />
70193 PIPE WRENCH HEEL JAW AND PIN ( 14" ) 50<br />
70194 PIPE WRENCH HEEL JAW AND PIN ( 18" ) 50<br />
70195 PIPE WRENCH HEEL JAW AND PIN ( 24" ) 50<br />
70196 PIPE WRENCH HEEL JAW AND PIN ( 36" ) 50<br />
70197 PIPE WRENCH HEEL JAW AND PIN ( 48" ) 50<br />
70200 PIPE WRENCH HOOK JAW ( 8" ) 50<br />
70201 PIPE WRENCH HOOK JAW ( 10" ) 50<br />
70202 PIPE WRENCH HOOK JAW ( 12" ) 50<br />
70203 PIPE WRENCH HOOK JAW ( 14" ) 50<br />
70204 PIPE WRENCH HOOK JAW ( 18" ) 50<br />
70205 PIPE WRENCH HOOK JAW ( 24" ) 50<br />
70206 PIPE WRENCH HOOK JAW ( 36" ) 50<br />
70207 PIPE WRENCH HOOK JAW ( 48" ) 50<br />
70225 TELESCOPIC BASIN WRENCH ( 3/8" - 1-1/4" ) 52<br />
70226 TELESCOPIC BASIN WRENCH ( 1-1/4" - 2-1/2" ) 52<br />
70235 CHAIN PIPE WRENCH ( L - 12"; 4" O.D.) 51<br />
70236 BASIN NUT WRENCH ( 3/8" - 1-1/4" ) 52<br />
70240 STRAP AND FITTING WRENCH ( 3" O.D. ) 53<br />
70241 STRAP AND FITTING WRENCH ( 8" O.D. ) 53<br />
70243 HEAVY DUTY CHAIN PIPE WRENCH ( L - 27"; 2-1/2" O.D.) 51<br />
70244 HEAVY DUTY CHAIN PIPE WRENCH ( L - 37"; 4" O.D.) 51<br />
70245 HEAVY DUTY CHAIN PIPE WRENCH ( L - 44"; 6" O.D.) 51<br />
70246 HEAVY DUTY CHAIN PIPE WRENCH ( L - 50"; 8" O.D.) 51<br />
70247 HEAVY DUTY CHAIN PIPE WRENCH ( L - 63"; 12" O.D.) 51<br />
70285 MULTICUT 65 CHAIN TUBE CUTTER ( 1" - 2" ) 46<br />
70286 CHAIN TUBE CUTTER - REPLACEMENT CHAIN 46<br />
70289 RATCHET PIPE REAMER ( 1/4" - 2" ) 52<br />
70296 SPARE RATCHET PIPE REAMER BLADE 52<br />
70401 MINICUT I PRO TUBE CUTTER ( 1/8" - 5/8" ) 43<br />
70402 MINICUT II PRO TUBE CUTTER ( 1/4" - 7/8" ) 43<br />
70416 SANIGRIP PL PLIER ( L - 10"; 2-3/8" O.D. ) 53<br />
70417 SPARE PLASTIC JAWS ( PAIR ) 53<br />
70441 ADJUSTABLE WRENCH ( 6" ) 50<br />
70442 ADJUSTABLE WRENCH ( 8" ) 50<br />
70443 ADJUSTABLE WRENCH ( 10" ) 50<br />
70444 ADJUSTABLE WRENCH ( 12" ) 50<br />
70445 ADJUSTABLE WRENCH ( 15" ) 50<br />
70521 WATER PUMP PLIERS ( 7" ) 49<br />
70522 WATER PUMP PLIERS ( 10" ) 49<br />
70523 WATER PUMP PLIERS ( 12" ) 49<br />
70531 ROLOCK PLIERS ( 7" ) 49<br />
70532 ROLOCK PLIERS ( 10" ) 49<br />
70533 ROLOCK PLIERS ( 12" ) 49<br />
70558 ROGRIP SELF ADJUSTING PLIERS ( 10" ) 49<br />
10<br />
107
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
70614 SUPER CUT DELUXE THREADING KIT 22<br />
70615 PLUMBER'S 9 - PIECE REPAIR KIT 53<br />
70711 BENCH YOKE VISE ( 1/8" - 4" O.D. ) 33<br />
70716 VISE ( 1/8" - 6" O.D. ) 33<br />
70752 TRIBENCH WITH CHAIN VISE ( 1/8" - 6" ) 33<br />
70753 BUCKET OILER 22, 23, 24, 25, 32<br />
70840X RATCHET HANDLE NO. 1 ( 1/4" - 1-1/4" ) 22<br />
70849X DIE HEAD (1-1/2" NPT - SUPERTRONIC 1250 & 2000/SUPER CUT) 34<br />
70850X DIE HEAD ( 2" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
709 STUD PUNCH, 7/8" 81<br />
70901X SUPER CUT HAND RATCHET THREADER SET<br />
108<br />
( 1/2", 3/4", 1", 1-1/4" NPT ) 22<br />
70903X SUPER CUT HAND RATCHET THREADER SET<br />
( 1/2", 3/4", 1" NPT ) 22<br />
70905X SUPER CUT HAND RATCHET THREADER SET<br />
( 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT ) 22<br />
70907X DIE HEAD (1/4" NPT - SUPTERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70908X DIE HEAD (3/8" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70912X DIE HEAD (1/2" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70913X DIE HEAD (3/4" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70914X DIE HEAD (1" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70915X DIE HEAD (1-1/4" NPT- SUPERTRONIC 1250 & 2000 / SUPER CUT) 34<br />
70916X DIES (1/4" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70917X DIES ( 3/8" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70918X DIES ( 1/2" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70919X DIES ( 3/4" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70920X DIES ( 1" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70921X DIES ( 1-1/4" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70945X DIES ( 1-1/2" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
70946X DIES ( 2" NPT - SUPERTRONIC 1250, 2000 and SUPER CUT ) 34<br />
710 STUD PUNCH, 1-11/32" 81<br />
71019 TUBE CUTTER 30 ( 1/8" - 1-1/8" ) 43<br />
712P PLACEMENT TOOL 83<br />
71259 SUPERTRONIC 2000 - MACHINE ONLY 24<br />
71259L SUPERTRONIC 2000 PORTABLE POWER THREADER<br />
( 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT ) 24<br />
71271 ROFIX ADAPTER WITH LOCKING RING 24<br />
71272 RATCHET HANDLE NO. 2 ( 1-1/2" - 2" ) 22<br />
71273 MONOBLOCK ADAPTER 22, 24<br />
71279 FORGED PIPE CLAMP, MAX. 1-1/4" 23<br />
71280 FORGED PIPE CLAMP ( 2" MAX ) 24<br />
713 STUD PUNCH, 2-5/8" 81<br />
71453 SUPERTRONIC 1250 PORTABLE POWER THREADER<br />
( 1/2", 3/4", 1", 1-1/4" NPT ) 23<br />
72095 ROSPI 8 PLUS MANUAL AND ELECTRIC DRAIN CLEANING UNIT 73<br />
72101 R 600 SEPERATING PIN FOR 7/8" AND 1-1/4" CABLE TOOLS 72<br />
72110 STANDARD DRAIN CLEANING SPIRAL BASKET FOR 5/8" CABLE 73<br />
72111 STANDARD DRAIN CLEANING SPIRAL BASKET FOR 1-1/4" CABLE 73<br />
72112 R 600 CABLE BASKET FOR 7/8", 74 FT. MAX 72<br />
72112 STANDARD DRAIN CLEANING SPIRAL BASKET FOR 7/8" CABLE 73<br />
72120 R 600 CABLE GUIDE GLOVE, LEFT 72<br />
72121 R 600 CABLE GUIDE GLOVE, RIGHT 72<br />
72142 ROWONAL SPRAY ( 7 OZ. / 200 ml ) 72<br />
72161 STRAIGHT AUGER ( 5/8" ) 74<br />
72162 RETRIEVING AUGER ( 5/8" ) 74<br />
72163 BULB AUGER ( 5/8" ) 74<br />
72165 FUNNEL AUGER ( 5/8" ) 74<br />
72166 SPIRAL SAWTOOTH CUTTER ( 5/8" ) 74<br />
72169 GREASE CUTTER ( 1" DIA. 5/8" ) 74<br />
72170 GREASE CUTTER ( 1-3/8" DIA. 5/8" ) 74<br />
72175 CROSS BLADE SERRATED CUTTER ( 5/8" ) 74<br />
72186 CHAIN SPINNING HEAD WITH SPIKE ( 5/8" ) 74<br />
72191 CARBIDE-TIPPED CUTTER ( 5/8" ) 74<br />
72203 RETRIEVING AUGER ( 7/8" ) 74<br />
72221 STRAIGHT AUGER ( 7/8" ) 74<br />
72222 FUNNEL AUGER ( 7/8" ) 74<br />
72229 SPIRAL SAWTOOTH CUTTER ( 7/8" ) 74<br />
72234 GREASE CUTTER ( 7/8" ) 74<br />
72250 SERRATED FORK CUTTER ( 7/8" ) 73<br />
72261 SPADE-HEAD CUTTER ( 7/8" ) 74<br />
72263 BULB AUGER ( 7/8" ) 74<br />
72265 TWO-WAY ROOT CUTTER ( 7/8" ) 73<br />
72275 CROSS BLADE SERRATED CUTTER ( 7/8" ) 74<br />
72278 CHAIN SPINNING HEAD WITH SPIKE ( 7/8" ) 74<br />
72291 CARBIDE-TIPPED CUTTER ( 7/8" ) 74<br />
72321 STRAIGHT AUGER ( 1-1/4" ) 74<br />
72322 FUNNEL AUGER ( 1-1/4" ) 74<br />
72325 RETRIEVING AUGER ( 1-1/4" ) 74<br />
72329 SPIRAL SAWTOOTH CUTTER ( 1-1/4" ) 74<br />
72347 CHAIN SPINNING HEAD WITH SPIKE ( 1-1/4" ) 74<br />
72350 SERRATED FORK CUTTER ( 1-1/4" ) 73<br />
72360 SPEDE-HEAD CUTTER ( 1-1/4" ) 74<br />
72363 BULB AUGER ( 1-1/4" ) 74<br />
72365 TWO-WAY ROOT CUTTER ( 1-1/4" ) 73<br />
7238SB KNOCKOUT KIT, SLUG-BUSTER 81<br />
72374 CROSS BLADE SERRATED CUTTER ( 1-1/4" ) 74<br />
72392 CARBIDE-TIPPED CUTTER ( 1-1/4" ) 74<br />
72412 ROSPI CABLE REPLACEMENT ( 5/8" X 25 FT. ) 73<br />
72431 STANDARD DRAIN CLEANING CABLE ( 7.5 FT X 5/8" ) 73<br />
72441 STANDARD DRAIN CLEANING CABLE ( 15 FT X 7/8" ) 72,73"<br />
72451 STANDARD DRAIN CLEANING CABLE ( 15 FT X 1-1/4" ) 73<br />
725-001 CARBIDE-GRIT TIPPED PILOT DRILL, 1/4" 85<br />
725-7/8 HOLE SAW, 7/8" 85<br />
725-1-1/8 HOLE SAW, 1-1/8" 85<br />
725-1-3/8 HOLE SAW, 1-3/8" 85<br />
725-1-1/2 HOLE SAW, 1-1/2" 85<br />
725-1-3/4 HOLE SAW, 1-3/4" 85<br />
725-2 HOLE SAW, 2" 85<br />
725-2-1/8 HOLE SAW, 2-1/8" 85<br />
725-2-1/2 HOLE SAW, 2-1/2" 85<br />
725-3-5/8 HOLE SAW, 3-5/8" 85<br />
725-4-1/8 HOLE SAW, 4-1/8" 85<br />
725-4-1/2 HOLE SAW, 4-1/2" 85<br />
72541 R 600 GUIDE HOSE 13FT. 72<br />
72638 R 600 CLUTCH JAW WITH SPRINGS 72<br />
72676 R 600 WITH ACCESSORIES 72<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
72869V R 600V DRAIN CLEANING MACHINE WITH GUIDE HOSE 72<br />
7310SB HYDRAULIC DRIVE KIT, RAM & HAND PUMP 81<br />
74628 GUIDE BALL 69<br />
7620515 ROLUB GUIDE SHOE ( 1/2" ) 14<br />
7620517 ROLUB GUIDE SHOE ( 5/8" ) 14<br />
7620520 ROLUB GUIDE SHOE ( 3/4" ) 14<br />
7620521 ROLUB GUIDE SHOE ( 7/8" ) 14<br />
7620522 ROLUB GUIDE SHOE ( 1" ) 14<br />
7620523 ROLUB GUIDE SHOE ( 1-1/8" ) 14<br />
8<br />
80205 AXLE AND NUT REPLACEMENT 47<br />
825-7/8 HOLE SAW, BI-METAL, 7/8" 85<br />
825-1-1/8 HOLE SAW, BI-METAL, 1-1/8" 85<br />
825-1-3/8 HOLE SAW, BI-METAL, 1-3/8" 85<br />
825-1-3/4 HOLE SAW, BI-METAL, 1-3/4" 85<br />
825-2 HOLE SAW, BI-METAL, 2" 85<br />
825-2-1/2 HOLE SAW, BI-METAL, 2-1/2" 85<br />
826S STOPS, HOLE SAW 84, 86<br />
830 HOLE SAW KIT, 1/2" THRU 2" 85<br />
830QS HOLE SAW KIT, QUICK CHANGE 84<br />
859-4 PVC PLUGS & PLUG SET 87<br />
860-1-1/2 PVC BLANKET, UP TO 1-1/2" 87<br />
860-3 PVC BLANKET, 2-3" 87<br />
860-4 PVC BLANKET, 3-1/2 AND 4" 87<br />
8870922 ROGROOVER, MACHINE ONLY 31<br />
88802 PIPESLICE 4 ( 3/4" ) 44<br />
88803 CUTTER WHEEL FOR 4 OR 5 44<br />
88806 CUTTER WHEEL FOR 1, 2, OR 3 44<br />
88807 PIPESLICE 1 ( 3/8" ) 44<br />
88808 PIPESLICE 3 ( 5/8" ) 44<br />
88810 PIPESLICE 2 ( 1/2" ) 44<br />
88814 PIPESLICE 5 ( 1" ) 44<br />
889 HOLE SAW KIT, BI-METAL 86<br />
89016 DIES, ALLOY, UNC ( 1/2" - 2SE, 50R ) 36<br />
89017 DIES, ALLOY, UNC ( 5/8" - 2SE, 50R ) 36<br />
89018 DIES, ALLOY, UNC ( 3/4" - 2SE, 50R ) 36<br />
89019 DIES, ALLOY, UNC ( 7/8" - 2SE, 50R ) 36<br />
89020 DIES, ALLOY, UNC ( 1" - 2SE, 50R ) 36<br />
89100 DIES, ALLOY ( 1/4"-3/8" NPT - 2SE) 35<br />
89101 ALLOY DIE SET ( 1/2" - 3/4" NPT ) 27, 35<br />
89102 ALLOY DIE SET ( 1" - 2" NPT ) 27, 35<br />
89120 DIES, ALLOY ( 1/2"-3/4" NPT - 2SE) 35<br />
89121 DIES, ALLOY ( 1" NPT - 2SE) 35<br />
89148 DIES, ALLOY ( 1/2" - 3/4" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
89149 DIES, ALLOY ( 1" - 1-1/4" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
89150 DIES, ALLOY ( 1-1/2" - 2" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
89151 DIES, ALLOY ( 2-1/2" - 3" NPSM - RHINO ® , 4SE, 2SE ) 35<br />
89162 DIES, RIDGID ® STYLE ( 1/2" - 3/4" NPT ) 35<br />
89163 DIES, RIDGID ® STYLE ( 1" - 2" NPT ) 35<br />
89197 DIES, ALLOY, UNC ( 1-1/8" - 1-1/4" - 2SE, 50R ) 36<br />
89198 DIES, ALLOY, UNC ( 1-3/8" - 1-1/2" - 2SE, 50R ) 36<br />
800.545.7698 www.rothenberger-usa.com<br />
9 90007 CUTTER WHEEL, STAINLESS STEEL 42<br />
901-12 BIT EXTENSION, 12" 82<br />
904H-18 BIT EXTENSION, 18" 82<br />
90614 MULTIBENDER ( 1/2", 5/8", 3/4", 7/8" ) 13<br />
930 ULTRA CUTTER KIT 85<br />
93667 PRESS RIING SET ( 2-1/2", 3", 4" RINGS ) ACTUATOR, CASE 19<br />
93677 PRESS RING XL ( 2-1/2" ) 19<br />
93682 PRESS RING XL ( 3" ) 19<br />
93687 PRESS RING XL ( 4" ) 19<br />
93692 PRESS RING XL ACTUATOR 19<br />
99016 REPLACEMENT PIN, CLIP 42<br />
A, E, F, H, P<br />
CM-450 CLAMP METER, TRUE RMS 90<br />
CMT-80 TESTER, AUTOMATIC ELECTRICAL 90<br />
DM-210A MULTIMETER, DIGITAL 89<br />
DM-40 MULTIMETER, MANUAL RANGING 90<br />
DM-510A MULTIMETER, DIGITAL 89<br />
DBITKIT DVERSIBIT STARTER KIT 83<br />
DTAPKIT DRILL TAP KIT, 6 PIECE 82<br />
E-239 THREADER STORAGE CABINET WITH WHEELS 27, 29<br />
EML100 LOCATOR, ELECTRONIC MARKER, MARKER-MATE 91<br />
FP3 WIRE REACH, 36" TELESCOPING 88<br />
FTS438-125 FISH TAPE, STEEL, 125'X1/8" 88<br />
FTS438-240 FISH TAPE, STEEL, 240'X1/8" 88<br />
F81664 CASE FOR PRESSLINER or AC ECO<br />
( 3 JAWS, 2 BATTERIES, CHARGER ) 19<br />
GT-12 VOLTAGE DETECTOR, NON-CONTACT 89<br />
GT-16 VOLTAGE DETECTOR, ADJUSTABLE NON-CONTACT 89<br />
H82402 ROCAM ® PLUS BATTERY 70<br />
H82460 ROCAM ® PLUS REPLACEMENT CABLE 70<br />
H88953 ROCAM ® POWER SUPPLY REPLACEMENT 69<br />
L77 LEVEL, MINI MAGNETIC BUBBLE 80<br />
L107 LEVEL, TORPEDO 80<br />
P 160 ROWELD ® P 160 SANILINE 65<br />
P 315 ROWELD ® P 315 W 65<br />
P 63 S-5 ROWELD ® P 63 S-5 SWORD 65<br />
P00551C RHINO ® COMPLETE MACHINE W/ 2-1/2" - 4"<br />
Numerical Index<br />
AUTOMATICE DIE HEADS & DIES FOR PLASTIC-COATED PIPE 29<br />
P20023 SWEATBOX II 63<br />
P70045C 2" PIPE CUTTER FOR PLASTIC PIPE ( 1/8" - 2" ) 46<br />
P70060C PIPE CUTTER FOR PLASTIC COATED PIPE ( 4" ) 46<br />
10<br />
109
10<br />
Numerical Index<br />
Cat No. Description Page Cat No. Description Page<br />
P70159C ALUMINUM PIPE WRENCH FOR PVC COATED PIPE ( 10" ) 50<br />
P70160C ALUMINUM PIPE WRENCH FOR PVC COATED PIPE ( 14" ) 50<br />
P70161C ALUMINUM PIPE WRENCH FOR PVC COATED PIPE ( 18" ) 50<br />
P70162C ALUMINUM PIPE WRENCH FOR PVC COATED PIPE ( 24" ) 50<br />
P70849C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 1-1/2" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P70850C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 2" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P70905C SUPER CUT HAND RATCHET THREADER SET ( 1/2", 3/4", 1",<br />
1-1/4", 1-1/2", 2" NPT FOR PLASTIC COATED PIPE ) 22<br />
P70912C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 1/2" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P70913C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 3/4" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P70914C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 1" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P70915C DIE HEAD FOR PLASTIC COATED PIPE<br />
( 1-1/4" NPT - SUPERTRONIC 1250 & 2000 / SUPER CUT ) 34<br />
P71259C SUPERTRONIC 2000 PORTABLE POWER THREADERS FOR PLASTIC<br />
COATED PIPE ( 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" NPT )<br />
MINI-COLLINS<br />
24<br />
® ADAPTER FOR RIDGID ®<br />
12-R - NO ADAPTER NEEDED 25<br />
110<br />
COLLINS CLASSIC, MINI-COLLINS, PANTHER, ROCAM, ROPRESS, ROPOWER,<br />
ROTRAC, SUPERTRONIC are registered trademarks of ROTHENBERGER.<br />
RIDGID ® is a registered trademark of Ridge Tool Company.<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
A<br />
A1 TUBE EXPANDER 7<br />
ADAPTERS, LARGE, HOLE SAW KIT 84, 86<br />
ADAPTERS, SMALL, HOLE SAW KIT 84, 86<br />
ARBOR WITH PILOT DRILL 85<br />
ARBOR, 5/16" 84, 86<br />
ARBOR, 7/16" 84, 86<br />
AUGER BIT, 1" TYPE A 83<br />
AUGER BIT, 3/4" TYPE A 83<br />
AVIATION SNIPS, LEFT CUT 80<br />
AVIATION SNIPS, RIGHT CUT 80<br />
AVIATION SNIPS, STRAIGHT CUT 80<br />
AUGER COMPONENTS 74<br />
AXLE AND SCREWS FOR TUBE CUTTERS 43, 45<br />
B<br />
BASIN WRENCH 52<br />
BIT EXTENSION, 12" 82<br />
BIT EXTENSION, 18" 82<br />
BIT SET, EZ BORE CONDUIT & PIPE 83<br />
BORING BIT, 1-1/4" WOOD 82<br />
BORING BIT, 1-1/4" BIG SHANK SHORTY WOOD 82<br />
BORING BIT, 1-1/8" BIG SHANK SHORTY WOOD 82<br />
BORING BIT, 1-1/8" WOOD 82<br />
BORING BIT, 1" BIG SHANK SHORTY WOOD 82<br />
BORING BIT, 1" SHORTY WOOD 82<br />
BORING BIT, 1" WOOD 82<br />
BORING BIT, 3/4" BIG SHANK SHORTY WOOD 82<br />
BORING BIT, 3/4" SHORTY WOOD 82<br />
BORING BIT, 3/4" WOOD 82<br />
BORING BIT, 5/8" SHORTY WOOD 82<br />
BORING BIT, 7/8" BIG SHANK SHORTY WOOD 82<br />
BORING BIT, 7/8" SHORTY WOOD 82<br />
BORING BIT, 7/8" WOOD 82<br />
BOX, FLAT-TOP 93<br />
BOX, SLANT TOP 92<br />
BUCKET OILER 22-25, 32<br />
BURNER TIPS 62<br />
BUSINGS, HOLE SAW KIT 84, 86<br />
C<br />
CABINET, UTILITY 93<br />
CARBIDE-GRIT TIPPED PILOT DRILL, 1/4" 85<br />
CARBIDE-TIPPED CUTTER KIT, STAINLESS STEEL 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-1/16" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-1/2" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-1/4" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-1/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-3/4" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-3/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-5/16" 84<br />
800.545.7698 www.rothenberger-usa.com<br />
Alphabetical Index<br />
CARBIDE-TIPPED HOLE CUTTER, 1-7/16" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1-7/32" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 1" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 11/16" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 13/16" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2-1/2" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2-1/4" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2-1/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2-3/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2-5/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 2" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 3" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 3/4" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 5/8" 84<br />
CARBIDE-TIPPED HOLE CUTTER, 7/8" 84<br />
CASTERS, 6" SWIVEL 92<br />
CASTERS, 6" SWIVEL, (2 RIDGID, 2 SWIVEL) 92<br />
CHAIN TUBE CUTTER - REPLACEMENT CHAIN 46<br />
CLAMP METER, TRUE RMS 90<br />
COLLINS 22A THREADING MACHINE 28<br />
COLLINS 2SE THREADING MACHINE 26<br />
COLLINS 4SE THREADING MACHINE 27<br />
COLLINS 44A THREADING MACHINE 30<br />
COLLINS 66A THREADING MACHINE 30<br />
COLLINS RHINO ® THREADING MACHINE 29<br />
COMPACT PRESS JAWS FOR COPPER AND PEX 16-19<br />
CONDUIT CUTTER, FLEX SPLITTER 86<br />
CRIMPING/STRIPPING COMBO TOOL 80<br />
CUTTER WHEEL, PLASTIC PIPE" 39<br />
CUTTER WHEEL, SOIL PIPE (E-Z CUTTER)" 39<br />
CUTTER WHEELS REPLACEMENT 28, 29, 39, 42, 43, 44, 45, 46<br />
D<br />
DEBURRING TOOLS INTERNAL/EXTERNAL 6, 44, 45, 52<br />
DIE HEADS 27, 34, 35, 36, 37, 38<br />
DIES 34-38<br />
DRAIN CLEANING TOOLS 72-74<br />
DRILL TAP KIT, 6 PIECE 82<br />
DVERSIBIT BIT EXTENSION 83<br />
DVERSIBIT STARTER KIT 83<br />
E<br />
ELECTRODE UNITS 63<br />
EXPANDER HEAD 7<br />
EXTRACTOR RATCHET 8<br />
E-Z BORE BIT, 1-1/2" 83<br />
E-Z BORE BIT, 1-1/4" 83<br />
E-Z BORE BIT, 1-1/8" 83<br />
E-Z BORE BIT, 1-3/4" 83<br />
E-Z BORE BIT, 1-3/8" 83<br />
E-Z BORE BIT, 1" 83<br />
E-Z BORE BIT, 2-1/4" 83<br />
10<br />
111
10<br />
Alphabetical Index<br />
Cat No. Description Page Cat No. Description Page<br />
E-Z BORE BIT, 2-1/8" 83<br />
E-Z BORE BIT, 2-9/16" 83<br />
E-Z BORE BIT, 2" 83<br />
E-Z BORE BIT, 3-5/8" 83<br />
E-Z BORE BIT, 3" 83<br />
E-Z BORE BIT, 4-5/8" 83<br />
E-Z CUTTER STAND 39<br />
E-Z CUTTER ® ELECTRIC PIPE CUTTERS 39<br />
F<br />
FISH TAPE, FLAT-STEEL 88<br />
FISH TAPE, STEEL 88<br />
FISH TAPE, STEEL, 125'X1/8" 88<br />
FISH TAPE, STEEL, 240'X1/8" 88<br />
FLAME REFLECTOR 62-63<br />
FLARING TOOLS 10<br />
FLASHLIGHT, FLEXIBLE LED 78<br />
FLASHLIGHT, POCKET 78<br />
FOAM PIPE JACKET REPLACEMENT 59<br />
G<br />
GLOVES, HIGH DEXTERITY 79<br />
GO/NO GO GAUGE 17-20<br />
GROOVING & CUTTING BITS 38<br />
H<br />
HACKSAW, 12" HEAVY DUTY 79<br />
HAMMER, 16 OZ 78<br />
HAND RATCHET 22<br />
HIGH PRESSURE HOSE 59<br />
HOLE SAW KIT, 1/2" THRU 2" 85<br />
HOLE SAW KIT, BI-METAL 86<br />
HOLE SAW KIT, QUICK CHANGE 84<br />
HOLE SAW STOPS, BI-METAL 86<br />
HOLE SAW, 1-1/2" 85<br />
HOLE SAW, 1-1/8" 85<br />
HOLE SAW, 1-3/4" 85<br />
HOLE SAW, 1-3/8" 85<br />
HOLE SAW, 2-1/2" 85<br />
HOLE SAW, 2-1/8" 85<br />
HOLE SAW, 2" 85<br />
HOLE SAW, 3-5/8" 85<br />
HOLE SAW, 4-1/2" 85<br />
HOLE SAW, 4-1/8" 85<br />
HOLE SAW, 7/8" 85<br />
HOLE SAW, BI-METAL, 1-1/8" 85<br />
HOLE SAW, BI-METAL, 1-3/4" 85<br />
HOLE SAW, BI-METAL, 1-3/8" 85<br />
HOLE SAW, BI-METAL, 2-1/2" 85<br />
HOLE SAW, BI-METAL, 2" 85<br />
HOLE SAW, BI-METAL, 7/8" 85<br />
HYDRAULIC DRIVE KIT, RAM & HAND PUMP 81<br />
112<br />
K<br />
KNOCKOUT KIT, SLUG-BUSTER 81<br />
KNOCKOUT PUNCH, 1-1/4" 80<br />
KNOCKOUT PUNCH, 1" 80<br />
KNOCKOUT PUNCH, 1/2" 80<br />
KNOCKOUT PUNCH, 3/4" 80<br />
L<br />
LEVEL, MINI MAGNETIC BUBBLE 80<br />
LEVEL, TORPEDO 80<br />
LITHIUM BATTERIES 16-19<br />
LOCATOR, ELECTRONIC MARKER, MARKER-MATE 91<br />
LOCATOR, WIRE & VALVE 91<br />
M<br />
MAP-PRO GAS 63<br />
MAXI BENDER 12<br />
MINIBEND 12<br />
MINI-COLLINS ® THREADERS 25<br />
MINICUT I / II PRO 43<br />
MINICUT TUBE CUTTER 43<br />
MONOBLOCK ADAPTER 22, 24<br />
MULTIBENDER 13<br />
MULTI-TOOL, 6-IN-1 77<br />
MULTIMETER, DIGITAL 89<br />
MULTIMETER, MANUAL RANGING 90<br />
N<br />
NIPPLE CHUCKS 31<br />
NOZZLE AND FILTER PIECE FOR FEED VALVE 59<br />
O<br />
OMNI MARKER, CABLE TV 91<br />
OMNI MARKER, GAS 91<br />
OMNI MARKER, NON-POTABLE WATER 91<br />
OMNI MARKER, POWER 91<br />
OMNI MARKER, SANITARY 91<br />
OMNI MARKER, TELEPHONE 91<br />
OMNI MARKER, WATER 91<br />
OPEN WHEELED THREADER STAND (WITH TOOL TRAY) 27-29<br />
P<br />
PEX CRIMPER 20<br />
PIPE CLAMPS 23, 24<br />
PIPE CUTTERS 46<br />
PIPE SUPPORT FITTING 39<br />
PIPE WRENCHES 50, 51<br />
PIPESLICE 44<br />
PLACEMENT TOOL 83<br />
800.545.7698 www.rothenberger-usa.com
Cat No. Description Page Cat No. Description Page<br />
PLASTIC CASE 82<br />
PLASTICUT REPLACEMENT BLADES 48<br />
PLIERS 49, 53<br />
PLIERS, DIAGONAL CUTTING 8" 76<br />
PLIERS, LONG NOSE, SIDE-CUTTING 8" 76<br />
PLIERS, SIDE-CUTTING 9" 76<br />
PRESS RIING SETS 19<br />
PROPANE 63<br />
PULLING GRIP 83<br />
PUMP PLIERS, 10" 76<br />
PUMP PLIERS, 12" 76<br />
PVC BLANKET, 2-3" 87<br />
PVC BLANKET, 3-1/2 AND 4" 87<br />
PVC BLANKET, UP TO 1-1/2" 87<br />
PVC HEATER/BENDER, ELECTRIC FOR 1/2" -2" 87<br />
PVC PLUGS & PLUG SET 87<br />
Q<br />
QUICK FREEZE SPRAY 59<br />
R<br />
RACK, CONDUIT & PIPE STORAGE 93<br />
RATCHET HANDLE NO. 2 ( 1-1/2" - 2" ) 22<br />
REAMERS 28, 29, 52<br />
RECIPROCATING BLADE, BI-METAL, SCROLL 86<br />
RECIPROCATING BLADE, BI-METAL, STRAIGHT 86<br />
RECIPROCATING BLADE, BIMETAL, TAPER 86<br />
RECIPROCATING BLADE, HCS, TAPER 86<br />
REPLACEMENT BLADE 79<br />
REPLACEMENT BLADE PACK, 1940 86<br />
REPLACEMENT BLADE, 1940 86<br />
REPLACEMENT PIPE CUTTER WHEELS 46<br />
RETROFIT KIT, HOLE SAW KIT 84, 86<br />
ROBEND ® 13, 14<br />
ROCAM ® CAMERA & ACCESSORIES 69-71<br />
ROCAM ® EXPANDER 6<br />
ROCOOL ® THREADING OIL 27, 32<br />
ROCUT REPLACEMENT BLADES 48<br />
ROCUTS 47, 48<br />
ROFIRE TORCHES 62, 63<br />
ROFIX ADAPTER WITH LOCKING RING 24<br />
ROFLARE ® FLARING TOOLS 9<br />
ROFORM ® SET & ACCESSORIES 9<br />
ROFROST ® FREEZING HEADS 59<br />
ROFROST ® REDUCTION INSERT 58<br />
ROFROST ® TURBO 58, 59<br />
ROGROOVER 31<br />
ROGROOVER MOUNTING KITS 27, 28, 31<br />
ROLLER BEARING SUPPORT 39<br />
ROLUB GUIDE SHOES 14<br />
ROPRESS PRESS JAWS FOR PEX 19<br />
800.545.7698 www.rothenberger-usa.com<br />
Alphabetical Index<br />
RONAL ® SPRAY 32<br />
RONOL ® CUTTING FLUID 22-24, 32<br />
ROPOWER 50R AND SUPERTRONIC 2SE MOUNTING KIT 26, 31<br />
ROPOWER 50R THREADING MACHINE 26<br />
ROPRESS TOOLS 16-18<br />
ROSCOPE 68<br />
ROSPI MANUAL AND ELECTRIC DRAIN CLEANING UNIT 73<br />
ROTHERM 2000 SOFT-SOLDERING UNIT 63<br />
ROTRAC TUBE CUTTER 42<br />
ROWONAL SPRAY<br />
S<br />
72<br />
SAFEVISE 25<br />
SAW, KEYHOLE 79<br />
SAW, PVC, 13" 79<br />
SAW, PVC, 18" 79<br />
SCREWDRIVER SET, 5-PIECE 77<br />
SCREWDRIVER SET, 7-PIECE 77<br />
SOLDERING PASTE 63<br />
SPADE BIT KIT 83<br />
SPARE CUTTER WHEELS 29<br />
SPRING REPLACEMENTS 47<br />
STANDARD TUBE BENDER 13<br />
STEP BIT 83<br />
STEP BIT KIT, KWIK STEPPER 82<br />
STEP BIT, 1-1/8" ELECTRICIANS 82<br />
STEP BIT, 1/2" MULTI-HOLE 82<br />
STEP BIT, 7/8" MULTI-HOLE 82<br />
STOPS, HOLE SAW 84<br />
STORAGE CHEST, MOBILE, 14X32" 92<br />
STORAGE CHEST, MOBILE, 24X48" 92<br />
STORAGE CHEST, MOBILE, 30X48" 92<br />
STRAP AND FITTING WRENCH 53<br />
STUD PUNCH, 1-11/32" 81<br />
STUD PUNCH, 2-5/8" 81<br />
STUD PUNCH, 7/8" 81<br />
SUPER CUT DELUXE THREADING KIT 22<br />
SUPER FIRE 2 TORCH 63<br />
SUPER FIRE 3 TORCH 62<br />
SUPERJACK PIPE STAND 27, 33<br />
SUPERTRONIC 2000 24<br />
SUPERTRONIC PORTABLE POWER THREADER 23<br />
SWEATBOX II<br />
T<br />
63<br />
TAPE MEASURE, 16' 78<br />
TAPE MEASURE, 25' 78<br />
TEE EXTRACTORS 8<br />
TEST PUMP 56<br />
TESTER, AUTOMATIC ELECTRICAL 90<br />
THERMOMETER, INFRARED 90<br />
TOOL BAG 53<br />
10<br />
113
10<br />
Alphabetical Index<br />
Cat No. Description Page Cat No. Description Page<br />
TORCH TIPS 63<br />
TRIPOD STANDS 14, 72<br />
TUBE BENDER 11, 13<br />
TUBE CUTTER 43-46<br />
TUBE BENDING FORMERS 11,12<br />
U<br />
ULTRA CUTTER KIT 85<br />
UNIDRILL ® 8<br />
UNI MARKER, CABLE TV 91<br />
UNI MARKER, GAS 91<br />
UNI MARKER, NON-POTABLE WATER 91<br />
UNI MARKER, POWER 91<br />
UNI MARKER, SANITARY 91<br />
UNI MARKER, TELEPHONE 91<br />
UNI MARKER, WATER 91<br />
UTILITY KNIFE 77<br />
V<br />
VISE 33<br />
VOLTAGE DETECTOR, ADJUSTABLE NON-CONTACT 89<br />
VOLTAGE DETECTOR, NON-CONTACT 89<br />
W<br />
WIRE REACH, 36" TELESCOPING 88<br />
WRENCH SET, 7-PIECE RATCHETING 77<br />
WRENCHES, ADJUSTABLE 50<br />
WRENCHES, PIPE, ALUMINUM 50, 51<br />
WRENCHES, BASIN 52<br />
WRENCHES, CHAIN 51<br />
WRENCHES, PIPE, HEAVY-DUTY 50, 51<br />
WRENCHES, OFFSET 51<br />
WRENCHES, STRAP & FITTINGS 53<br />
WRENCHES, PIPE WRENCH PARTS 50<br />
114<br />
COLLINS CLASSIC, MINI-COLLINS, PANTHER, ROCAM, ROPOWER,<br />
ROTRAC, SUPERTRONIC are registered trademarks of ROTHENBERGER.<br />
RIDGID ® is a registered trademark of Ridge Tool Company.<br />
800.545.7698 www.rothenberger-usa.com
800.545.7698 www.rothenberger-usa.com<br />
Notes<br />
115
Notes<br />
116<br />
800.545.7698 www.rothenberger-usa.com