Tow eyes - Transpec

More documents

Recommendations

Info

50mm Weld-in toweye• Pt #: 50mm/SS• D-value: 130kN• 65Wx 60Hmm shank x 440mm OA length• Weight: 10.5kgs• Static vertical support load: 1000kgs• Pt #: 50mm/LS• D-value: 314kN• 80Wx 75Hmm shank x 432mm OA length• Weight: 13.4kgs• Static vertical support load: 1000kgs(dependant on Dc and V-value)• DC-value: 90kN• V-value: 30kN3
50mm Weld-in tow eye(cont)Pt no. 10990173• D-Value:150kN• Up to 2500kgs static vertical load• Length face plate to eye centre: 331mm• Weight: 28.5kgs• GTW 20,500kg- Static vertical support load:2500kgs• GTW 25,000kg- Static vertical support load:1000kgsMounting Instructions• Fastening plate made of material St 52-3 DIN17100 is to be welded on so that the flangesidemarked with ‘0’ is facing up (circularwelding with fillet = 10mm radius).Before Welding:• Twist off the nuts VM16 DIN 980 quality 8from the screws M16 quality 8.8 at the sleeveand pull off the distance sleeve.• After welding: screw up all 4 nuts (oil applied)and tighten them alternatively and regularlyuntil the tightening torque of 200+10Nm isreached.• After the first 1500-3500kms check torquesettings. If necessary, re-tighten.4
Page 1: Tow eyesJune 2006Transport Specialt
Page 7 and 8: Flange mount tow eye(cont)40mm Bolt
Page 9 and 10: Interchangeable tow eye40mm Assy Pt
Page 11 and 12: Wear and testing• Upon possible d
Page 13 and 14: Welding (cont)50mm weld-in tow eyeI
Page 15: Notes:14

Tow eyes - Transpec

Create successful ePaper yourself

Delete template?

Save as template?