SIMRAD GD10P - IR GAS DETECTOR - ICEWeb
SIMRAD GD10P - IR GAS DETECTOR - ICEWeb SIMRAD GD10P - IR GAS DETECTOR - ICEWeb
6- Electrical connection 3 wires (M20 EExe cable gland)Temperature range:- Storage -40°C to +70°C- Operating -20°C to +45°C- Operating (option) -40°C to +60°C- Humidity (operation) 99% RH non-condensingExplosion-proof housing:- Main compartment EExd IIC T6- Terminal compartment EExeProtection category IP66/IP67 DIN 40050Housing material Stainless steel SIS2343 (ASTM 316)Weight, incl. Weather Approx. 2.9 kgProtectionAccessoriesWeather ProtectionSample Flow HousingDuct Mounting Brackets
7Figure 1.1GD10P, outline dimensions (mm)1.5 Certification and StandardsThe GD10P has been certified according to:Atex Directive 94/9/EC, EMC Directive 89/336/EEC Article 4 andrequirements laid down by the following standards:EN50014/IEC 60079-0EN 50018/IEC 60079-1EN 50019/IEC 60079-7EN 50054EN 50057EN 61779-1/IEC 61779-1Electrical apparatus for potentiallyexplosive atmospheres.Generalrequirements.Electrical apparatus for potentiallyexplosive atmospheres. Flame-proofenclosure “d”.Electrical apparatus for potentiallyexplosive atmospheres. Increased safety“e”.Electrical apparatus for the detection andmeasurement of combustible gases.General requirements and test methods.Performance requirements for Group IIapparatus indicating up to 100 % lowerexplosive limit.Electrical apparatus for the detection and
- Page 1: SIMRAD GD10P - IR GASDETECTOROPERAT
- Page 4 and 5: 5.4 GAS DETECTION SYSTEM...........
- Page 6 and 7: 41.2 ConstructionA complete GD10P G
- Page 10 and 11: 8EN 61779-4/IEC 61779-4EN 50081-1EN
- Page 12 and 13: 10In order to achieve minimum respo
- Page 14 and 15: 122.1.4 Mounting the GD10PThe detec
- Page 16 and 17: 142.2.2.2 Retrofit mountingFor retr
- Page 18 and 19: 163. OPERATION3.1 Start-up procedur
- Page 20 and 21: 18• If there is an air movement o
- Page 22 and 23: 20Figure 4.3Test procedure
- Page 24 and 25: 22Refer to Figure 5.2 below.Radiati
- Page 26 and 27: 24Converting % LEL to % v/v is base
- Page 28: 261 21: Plate Adapter (junctionbox/
6- Electrical connection 3 wires (M20 EExe cable gland)Temperature range:- Storage -40°C to +70°C- Operating -20°C to +45°C- Operating (option) -40°C to +60°C- Humidity (operation) 99% RH non-condensingExplosion-proof housing:- Main compartment EExd IIC T6- Terminal compartment EExeProtection category IP66/IP67 DIN 40050Housing material Stainless steel SIS2343 (ASTM 316)Weight, incl. Weather Approx. 2.9 kgProtectionAccessoriesWeather ProtectionSample Flow HousingDuct Mounting Brackets