Table of Contents - TG Drives

46
Anybus-S Related Mnemonics
PL2 MNEMONICS
SendObj Lan1 Sval Send the content of the buffer for the message
object at Sval on to the CAN bus.
For a detailed description see the LAN1
group.
ANYBUS-S RELATED MNEMONICS
AnybusIn Modifies the input buffer to the
Anybus-S module. Data in the
input buffer is to be transmitted
onto the Fieldbus.
AnybusIn putDWORD , Write 32 bits, unsigned, from
to the buffer at offset
(byte offset)
AnybusIn putWORD , Write 16 bits, unsigned, from
to the buffer at offset
(byte offset)
AnybusIn putBYTE , Write 8 bits, unsigned, from
to the buffer at offset
(byte offset)
AnybusIn putLONG , Write 32 bits, signed, from
to the buffer at offset
(byte offset)
AnybusIn putINT , Write 16 bits, signed, from
to the buffer at offset
(byte offset)
AnybusIn putSCHAR , Write 8 bits, signed, from
to the buffer at offset
(byte offset)
AnybusIn getDWORD , Reads 32 bits, unsigned, from
the buffer into at offset
(byte offset)
AnybusIn getWORD , Reads 16 bits, unsigned, from
the buffer into at offset
(byte offset)
AnybusIn getBYTE , Reads 8 bits, unsigned, from
the buffer into at offset
(byte offset)
AnybusIn getLONG , Reads 32 bits, signed, from the
buffer into at offset
(byte offset)
AnybusIn getINT , Reads 16 bits, signed, from the
buffer into at offset
(byte offset)
AnybusIn getSCHAR , Reads 8 bits, signed, from the
buffer into at offset
(byte offset)
AnybusOut Modifies the output buffer from
User's Manual 5.1 Inmotion Technologies AB
Doc. No.9032 0027 01 (B), Rev. 11.07.2001