Table of Contents - TG Drives

216
Test
including the upload and download of information to and from the target controller.
Users can:
• Change values of registers.
• Enter and patch code in the DMC 2 without having to recompile and download
to the controller.
ACCESSING THE TEST SYSTEM
The Test system is accessed from the ECT main menu by selecting:
• Window
• Terminal
This displays a new menu bar as well as a terminal window like that shown in
Figure 18.
B018
Figure 18. Terminal window.
The Test Window automatically attempts to connect with the DMC 2 controller
through the selected communication device. If this fails, a dialog box indicating this
is displayed. The file in the active Edit Window internally informs the Test Window
of the current source file. If there is no active Edit Window, a file must be opened.
TEST MENU
The Test menu appears when there is an active Terminal window on the desktop.
This menu includes the following selections:
FILE CONTROLLER PROJECT OPTIONS WINDOW HELP
The following menu selection descriptions are those that directly relate to the Test
environment.
FILE
Create or open an editor window. See Edit
CONTROLLER
The Controller selection controls the DMC 2 controller. Selections within this menu
item allow the user to download a program, start and stop the controller.
Start Starts execution of the application program that is
id t i th DMC 2
t ll
User's Manual 5.1 Inmotion Technologies AB
Doc. No.9032 0027 01 (B), Rev. 11.07.2001
ECT