Table of Contents - TG Drives
Table of Contents - TG Drives
Table of Contents - TG Drives
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
148<br />
LAN1, Local area network 1<br />
LAN1.ErrStat<br />
12 -2 31 ..2 31 -1 RW<br />
EXTENDED REGISTER GROUPS<br />
Error statistic. Number <strong>of</strong> errors since power on or reset.<br />
LAN1.RxStat 13 -2 31 ..2 31 -1 RW<br />
Receive statistic. Number <strong>of</strong> successfully received frames<br />
since power on or reset.<br />
LAN1.TxStat 14 -2 31 ..2 31 -1 RW<br />
Transmit statistic. Number <strong>of</strong> successfully transmitted frames<br />
since power on or reset.<br />
LAN1.RemStat 15 -2 31 ..2 31 -1 RW<br />
Indicates number <strong>of</strong> received ’remote frame’ packets.<br />
LAN1.ICount 16 -2 31 ..2 31 -1 RW<br />
Debug usage. Indicates number <strong>of</strong> total service interrupts.<br />
LAN1.VecNum 17 0..xx R<br />
Indicates the cascaded level that the<br />
connected to<br />
1 means that cascade 1 is used<br />
2 means that cascade 2 is used<br />
4 means that cascade 3 is used.<br />
LAN1.Port 18 0..255 RW<br />
Not used<br />
LAN1.OvrWrite 19 0..65535 R<br />
LAN1.Handler is<br />
LAN1.Pend<br />
Pending interrupt overwrite counter. Indicates the number <strong>of</strong><br />
times that the bit was still active at the time when<br />
the same bit was to be set as a result <strong>of</strong> a new interrupt. In<br />
other words, the PL interrupt service routine was not<br />
performed before a new interrupt was generated.<br />
Note. There is no indication on what priority level this occurred<br />
at nor does it indicate if it was a receive, or transmit interrupt.<br />
User's Manual 5.1 Inmotion Technologies AB<br />
Doc. No.9032 0027 01 (B), Rev. 11.07.2001