Acceptable Container Condition - Itco.be

2.2 Top and Bottom Side and End RailsNOT Acceptable Condition• Cuts, holes, gouges or splits.• Cracks in welds or parent metal.• Improper repairs.• Dents greater than 25 mm (1 inch).• Out of straight greater than 25 mm (1 inch) per 2 m (79 inch) length.• Distortion reducing clearance preventing operation of discharge valve.• Twisted or bent outwards beyond the limits of the ISO corner fittings.• Severe corrosion.• Loose or missing fasteners.________________________________________________________________________Acceptable Condition• Dents not exceeding 25 mm (1 inch).• Dents in bottom face of bottom rails which do not affect any formed edge.NOT Acceptable Condition2. 3 Ancillary Bracing• Cuts, holes, gouges or splits.• Cracks in welds or parent metal.• Improper repairs.• Dents and distortions greater than 25 mm (1 inch).• Distortion reducing clearance preventing operation of discharge valve• Twisted or bent outwards beyond the limits of the ISO corner dimensions.• Severe corrosion.NOT Acceptable Condition• Cuts, holes, gouges or splits.• Cracks in welds or parent metal.8WWW.itco.be