Acceptable Container Condition - Itco.be

More documents

Recommendations

Info

• Broken or missing retaining wire or chain.• Damage affecting operation._____________________________________________________________________Acceptable Condition• SWR seals.NoteReplacement caps must be secured by a chain.Butterfly Valve Top and Bottom Outlet and Vapour Return ValveItem Description1Handle LeverItem Description13Gland Plate Washer2Handle Pin14Gland Plate Nut3Handle Screw15Gland ‘O’ Ring4Handle Spring16Flanged Body5Gland Plate Screws17Gland Plate Washer6Handle18Gland Plate Nut7Gland Plate19Fixed Pivot8Gland Pin20Bottom Bearing9Gland Ring21Closing Plate10Gland ‘O’ Ring22Main Seal11Shaft23Locating Ring12Gland Ring24Seal Plate10.5 Remote Emergency Closure10. 5 Remote Emergency ClosureNOT Acceptable Condition• Damage rendering remote closure inoperable.• Seized.• Broken thermal closure (when fitted)• Insecure.22WWW.itco.be
11 Heating11.1 Steam Tube and CapNOT Acceptable Condition• Leaks.• Damaged screwed fittings.• Missing dust caps.• Missing chain or cable.• Distortions greater than 50% of the steam tube depthNote :In all cases of damage the steam tubes must be pressure tested. Defective steam trapsshould be removed, replacement is not required.11.2 ThermometerNOT Acceptable Condition• Not operating correctly.• Broken facia or dial.• Missing or insecure.• Improperly fitted...................................................................................................................................................Acceptable Condition• Condensation which does not prevent legibility.11.3 Electric HeatingNOT Acceptable Condition• Non-operational.• Missing parts.• Damage or deterioration that may allow moisture entry to control boxes orelements.• Insecure components, cables or terminals.• Corroded terminals or components.• Improper repairs.• Earth leakage less than 1 megohm.WWW.itco.be23
Page 1 and 2: Acceptable Container ConditionITCO
Page 3 and 4: IntroductionThis Tank Container Ins
Page 5 and 6: Cleanliness1.1 InteriorNOT Acceptab
Page 7 and 8: NOT Acceptable Condition___________
Page 9 and 10: • Improper repairs.• Dents and
Page 11 and 12: 5 Insulation and CladdingINSULATIO
Page 14 and 15: 6. 3 Dipstick and Calibration Chart
Page 16 and 17: Note :Flame arrestors are not neces
Page 18 and 19: • Sharp indentations, creases or
Page 20 and 21: • Customs sealing ring, missing
Page 24 and 25: NoteAll parts must be well-maintain
Page 26 and 27: 13.3 Mandatory Tests 5 Year or 2 ½
Page 28 and 29: TANK SERIAL NO.Location:Inspected B

Acceptable Container Condition - Itco.be

Create successful ePaper yourself

Delete template?

Save as template?