PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

Picture 64: Set PDM type “Archive (Non-BOM)”In the confirmation dialog of the update the object “Table” is included with type“CMIArchive” (see Picture 65: Confirm update including CMI Archive).Picture 65: Confirm update including CMI ArchiveThe CMI Archive file will be shown in the product structure.When you have loaded this structure, the files contained in this archive will be unpackedand loaded in the CATIA V5, too.It is not possible to see which objects of the geometry in CATIA are part of an archive.You have to be careful with you changes.When you have made changes in the geometry included in the archive then thesechanges will be store with the next update action.User-Defined PropertiesThe PDM-Workbench supports user-defined properties in the CATIA V5 for several CATIAobjects. This depends on the customization for which CATIA objects the user-definedproperties will be send from the PDM system to CATIA V5. You can open the propertiesdialog for the selected object by clicking on the right mouse button and selecting theaction “Properties” (see Picture 66: Action “Properties”).PDM-Workbench User Manual 39