PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

More documents

Recommendations

Info

Picture 63: Updated sub-component relationsSupport of CMI ArchiveThis action is only available in the PWB data model.The PDM-Workbench supports the CMI Archive in the CATIA V5. You can read a productstructure, update the geometry in the archive, and update the files in the archive.You can also create a new Archive file. For this you have to choose the PDM type“Archive (Non-BOM)” before you synchronize the geometry structure with the PDM system(seePicture 64: Set PDM type “Archive (Non-BOM)”).38 PDM-Workbench User Manual
Picture 64: Set PDM type “Archive (Non-BOM)”In the confirmation dialog of the update the object “Table” is included with type“CMIArchive” (see Picture 65: Confirm update including CMI Archive).Picture 65: Confirm update including CMI ArchiveThe CMI Archive file will be shown in the product structure.When you have loaded this structure, the files contained in this archive will be unpackedand loaded in the CATIA V5, too.It is not possible to see which objects of the geometry in CATIA are part of an archive.You have to be careful with you changes.When you have made changes in the geometry included in the archive then thesechanges will be store with the next update action.User-Defined PropertiesThe PDM-Workbench supports user-defined properties in the CATIA V5 for several CATIAobjects. This depends on the customization for which CATIA objects the user-definedproperties will be send from the PDM system to CATIA V5. You can open the propertiesdialog for the selected object by clicking on the right mouse button and selecting theaction “Properties” (see Picture 66: Action “Properties”).PDM-Workbench User Manual 39
Page 1 and 2: PDM-WorkbenchPDM-WorkbenchRelease 2
Page 3: PrefaceThis manual describes the ma
Page 7 and 8: Table of FiguresPICTURE 1: PDM-WORK
Page 9: CHAPTER 1OverviewThis chapter provi
Page 12 and 13: The following dialog (see Picture 4
Page 14 and 15: Some attribute values can be keyed
Page 16 and 17: Picture 12: Result of expand single
Page 18 and 19: Hide Sub-StructureWhen you want to
Page 20 and 21: LockLock in the PDM-Workbench windo
Page 22 and 23: Picture 23: Action “Lock” in th
Page 24 and 25: Picture 27: Action “Unlock” in
Page 26 and 27: There are several types of attribut
Page 28 and 29: In the above window (PDM-Workbench
Page 30 and 31: Picture 36: Split window after Load
Page 32 and 33: Picture 38: Action "Paste" between
Page 34 and 35: The progress of the Update will be
Page 36 and 37: Picture 46: Confirm the Advanced Up
Page 38 and 39: When the Advanced Update process ha
Page 40 and 41: Picture 53: Making changes in the g
Page 42 and 43: Picture 56: Highlighted nodes in PD
Page 44 and 45: This works in the opposite directio
Page 48 and 49: Picture 66: Action “Properties”
Page 50 and 51: Picture 68: Action “Open in New W
Page 52 and 53: OptionsOnce you are logged in into
Page 54 and 55: 46 PDM-Workbench User Manual

PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?