PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

More documents

Recommendations

Info

Picture 53: Making changes in the geometryIn order to display the changes you have to click on the “Refresh PDM Structure” icon. Then the status of the changed objects in the PDM product structure will beupdated.Now e.g. the dirty object owned by the session user will be displayed in yellow in the PDMproduct structure. The dirty objects on the way to the root are displayed in red becausethey are not owned by the session user (see Picture 54: Refreshed PDM Structure).Picture 54: Refreshed PDM Structure32 PDM-Workbench User Manual
Force Load CATPartWhen you have loaded the CATIA node into the structure via the Desk command becausethe file could not be loaded then you can load the CATIA data with the required PDM-Workbench information. For this you have to select the CATIA node and open the contextmenu. Then choose “PDM-WorkbenchForce Load CATPart”.Highlight PDM NodesSometimes it is important to find a PDM node when you are working on the correspondingobject in the geometry, e.g. in order to check out the PDM object. Or you have selected anobject in the PDM product structure and want to see the corresponding object in thegeometry.For this you can select an object in the geometry and click on the right mouse button. Thecontext menu opens and you have to choose “PDM-WorkbenchHighlight PDM Nodes”(see Picture 55: Action “Highlight PDM Nodes”).Picture 55: Action “Highlight PDM Nodes”The PDM-Workbench window will be displayed in the foreground and the objects thatcorrespond to the selection in the geometry will be highlighted (marked) (see Picture 56:Highlighted nodes in PDM Structure). If there is no PDM-Workbench window opened youwill get a warning that you have to open the PDM structure first. It is important that youhave only one PDM Structure window for this Part Number.PDM-Workbench User Manual 33
Page 1 and 2: PDM-WorkbenchPDM-WorkbenchRelease 2
Page 3: PrefaceThis manual describes the ma
Page 7 and 8: Table of FiguresPICTURE 1: PDM-WORK
Page 9: CHAPTER 1OverviewThis chapter provi
Page 12 and 13: The following dialog (see Picture 4
Page 14 and 15: Some attribute values can be keyed
Page 16 and 17: Picture 12: Result of expand single
Page 18 and 19: Hide Sub-StructureWhen you want to
Page 20 and 21: LockLock in the PDM-Workbench windo
Page 22 and 23: Picture 23: Action “Lock” in th
Page 24 and 25: Picture 27: Action “Unlock” in
Page 26 and 27: There are several types of attribut
Page 28 and 29: In the above window (PDM-Workbench
Page 30 and 31: Picture 36: Split window after Load
Page 32 and 33: Picture 38: Action "Paste" between
Page 34 and 35: The progress of the Update will be
Page 36 and 37: Picture 46: Confirm the Advanced Up
Page 38 and 39: When the Advanced Update process ha
Page 42 and 43: Picture 56: Highlighted nodes in PD
Page 44 and 45: This works in the opposite directio
Page 46 and 47: Picture 63: Updated sub-component r
Page 48 and 49: Picture 66: Action “Properties”
Page 50 and 51: Picture 68: Action “Open in New W
Page 52 and 53: OptionsOnce you are logged in into
Page 54 and 55: 46 PDM-Workbench User Manual

PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

Create successful ePaper yourself

Delete template?

Save as template?