PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

Refresh PDM StructureWhen you have made some actions on the geometry that have an impact on the status ofthe objects in the PDM product structure, that are not displayed automatically, then youhave to update the status display manually.After the load of the geometry the status of the objects of the PDM product structure is inthe default state.There are the following possible states:• No background color: not owned by session user, no changes• Green: owned by session user, no changes• Yellow: owned by session user, dirty because of changes• Red: not owned by session user, dirty because of changes• Black: the object is finalized in the PDM (for example: released state)• White: the object does not have the file in the PDMThe CATIA Part is owned by the session user and not changes. It is marked in green (seePicture 52: PDM Structure and geometry in CATIA V5).Picture 52: PDM Structure and geometry in CATIA V5In the CATIA V5 you can make some changes in the geometry (see Picture 53: Makingchanges in the geometry) that make the objects in the PDM product structure dirty. Thisstate change will not be displayed automatically.PDM-Workbench User Manual 31