PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

More documents

Recommendations

Info

When the Advanced Update process has finished you are informed about the actions thathave been performed. The related instances and the created objects are reported in theinformation window (see Picture 50: Information window when Advanced Update isfinished).Picture 50: Information window when Advanced Update is finishedOpen PDM StructureWhen you have opened the geometry in CATIA V5 you have the possibility to open thecorresponding PDM product structure.For this you have to click on the “PDM Structure” icon . Then a PDM-Workbenchwindow with the PDM product structure will be opened (see Picture 51: PDM Structure forgeometry).Picture 51: PDM Structure for geometry30 PDM-Workbench User Manual
Refresh PDM StructureWhen you have made some actions on the geometry that have an impact on the status ofthe objects in the PDM product structure, that are not displayed automatically, then youhave to update the status display manually.After the load of the geometry the status of the objects of the PDM product structure is inthe default state.There are the following possible states:• No background color: not owned by session user, no changes• Green: owned by session user, no changes• Yellow: owned by session user, dirty because of changes• Red: not owned by session user, dirty because of changes• Black: the object is finalized in the PDM (for example: released state)• White: the object does not have the file in the PDMThe CATIA Part is owned by the session user and not changes. It is marked in green (seePicture 52: PDM Structure and geometry in CATIA V5).Picture 52: PDM Structure and geometry in CATIA V5In the CATIA V5 you can make some changes in the geometry (see Picture 53: Makingchanges in the geometry) that make the objects in the PDM product structure dirty. Thisstate change will not be displayed automatically.PDM-Workbench User Manual 31
Page 1 and 2: PDM-WorkbenchPDM-WorkbenchRelease 2
Page 3: PrefaceThis manual describes the ma
Page 7 and 8: Table of FiguresPICTURE 1: PDM-WORK
Page 9: CHAPTER 1OverviewThis chapter provi
Page 12 and 13: The following dialog (see Picture 4
Page 14 and 15: Some attribute values can be keyed
Page 16 and 17: Picture 12: Result of expand single
Page 18 and 19: Hide Sub-StructureWhen you want to
Page 20 and 21: LockLock in the PDM-Workbench windo
Page 22 and 23: Picture 23: Action “Lock” in th
Page 24 and 25: Picture 27: Action “Unlock” in
Page 26 and 27: There are several types of attribut
Page 28 and 29: In the above window (PDM-Workbench
Page 30 and 31: Picture 36: Split window after Load
Page 32 and 33: Picture 38: Action "Paste" between
Page 34 and 35: The progress of the Update will be
Page 36 and 37: Picture 46: Confirm the Advanced Up
Page 40 and 41: Picture 53: Making changes in the g
Page 42 and 43: Picture 56: Highlighted nodes in PD
Page 44 and 45: This works in the opposite directio
Page 46 and 47: Picture 63: Updated sub-component r
Page 48 and 49: Picture 66: Action “Properties”
Page 50 and 51: Picture 68: Action “Open in New W
Page 52 and 53: OptionsOnce you are logged in into
Page 54 and 55: 46 PDM-Workbench User Manual

PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

Create successful ePaper yourself

Delete template?

Save as template?