PDM-Workbench PDM-Workbench Release 2.5 User Manual - CMI.

PrefaceThis manual describes the main functionality delivered by the PDM-Workbench.The functionality of the PDM-Workbench as described in this manual uses ENOVIA V6 asbackend PDM system for CATIA V5.Other PDM systems might support the functionality of the PDM-Workbench with their owntypes of objects. Layout of dialogs as well as object and relation types or classes mightvary accordingly.About this ManualThis manual is intended for end users of the PDM-Workbench.It assumes that the reader is familiar with the CATIA application and with ENOVIA V6.Related DocumentsThe following manuals contain information about installation, administration, usage, andcustomization of the PDM-Workbench:Manual TitleVersionPDM-Workbench Installation & Administration Manual 2.5PDM-Workbench User Manual 2.5Operating Manual PDM WebConnector 3.0OrganizationThis manual contains the following chapters:Chapter 1 provides basic information about the PDM-Workbench and describes somefeatures of this application.Chapter 2 describes the functionality which is implemented in the CATIA V5 workshop.Glossary contains the PDM-Workbench terminology.TrademarksCATIA and ENOVIA are registered trademarks of Dassault Systèmes.Names of products mentioned in this manual are used for identification purpose only andmight be trademarks of their companies.PDM-Workbench User Manualiii