Filtoo Manual - Flextraction
Filtoo Manual - Flextraction Filtoo Manual - Flextraction
5.Repair of faultsRepair of faults43DeutschFault Possible cause RemedyExtraction performancetoo weak(Fumes are notor only hardlyextracted).The device doesnot start.Filter elements are saturated.The throttle valve of the suctionhood is closed.The suction hose or suction arm isnot or not correctly closed.The clean air outlet is narrowed orcovered.The suction duct is narrowed.The suction element is damaged.The mains plug is not or notcorrectly plugged into the socket.The socket is not supplied withvoltage.Replace the filter elements, dispose of theused filters appropriately!Open the throttle valve.Check the position of the suction hose orthe suction arm and connect it if necessary.Check the clean air outlet, repair the fault ifnecessary.Check the suction duct, repair the fault ifnecessary.Replace the extraction element.Check/correct the mains connection.Check the electric circuit.If necessary, consult an electrician.EnglishPolski EspañolFrançais
44 Operating instructions - TEKA–filtoo1.Technical dataProduct designationSupply voltageType of currentFrequencyEngine performancefiltoo(115 V, 50 Hz)115 / 230 V1 Ph50 / 60 Hz1,1 kWNominal current 7,0 A (at 230 V) / 13,2 A (at 115 V)Volumetric air flow max.Depression max.1600 m³/h1800 PaIP rating IP 54ISO classControl voltageWidthDepthF115 / 230 V580 mm580 mmfiltoo(115 V, 60 Hz)filtoo(230 V, 50 Hz)
- Page 1 and 2: TEKA - filtooBedienungsanleitungEng
- Page 3 and 4: 28Operating instructions - TEKA-fil
- Page 5 and 6: 30 Operating instructions - TEKA-fi
- Page 7 and 8: 32 Operating instructions - TEKA-fi
- Page 9 and 10: 34 Operating instructions - TEKA-fi
- Page 11 and 12: 36 Operating instructions - TEKA-fi
- Page 13 and 14: 38 Operating instructions - TEKA-fi
- Page 15 and 16: 40 Operating instructions - TEKA-fi
- Page 17: 42 Operating instructions - TEKA-fi
- Page 21 and 22: 46 Operating instructions - TEKA-fi
- Page 23: TEKAAbsaug- und Entsorgungstechnolo
44 Operating instructions - TEKA–filtoo1.Technical dataProduct designationSupply voltageType of currentFrequencyEngine performancefiltoo(115 V, 50 Hz)115 / 230 V1 Ph50 / 60 Hz1,1 kWNominal current 7,0 A (at 230 V) / 13,2 A (at 115 V)Volumetric air flow max.Depression max.1600 m³/h1800 PaIP rating IP 54ISO classControl voltageWidthDepthF115 / 230 V580 mm580 mmfiltoo(115 V, 60 Hz)filtoo(230 V, 50 Hz)
Change language