IBM System/7 Functional Characteristics - All about the IBM 1130 ...

Thickness Paper - .004 + .0003" (0,10 + 0,008 mm)Mylar- .003 + .0003" (0,08 + 0,008mm).100 + .003"(2,54± 0,08 mm)—I"1.000 + .003"(25,40 + 0,08 mm)•■.392 ± .003"(9,96 + 0,08 mm) •.100 + .002"(2,54 + 0,05 mm)+ .001".072 —.002"+ 0,03 trim)(1,83 — 0,05 mm)• • •- I••••• •+ .002"• •I-4-- one data character.046— .001"4E, 4t- .100 + .002"• • --6 •• •• •• •(1,17 + 2:235 mm)(2,54 + 0,05 mm)— character bit 8Feedhole— character bit 1Figure 9-2. Punched tape data formatOPERATOR STATION FUNCTION AND COMMAND SWITCHESSeven push-button switches are mounted on the operator station to the right of thekeyboard. The functions of these switches are described in the following paragraphs.PowerThis switch controls power to the operator station. The switch is pressed once to turn onpower and once to turn off power. The switch button lights when power to the operatorstation is turned on.Motor OffThis switch turns off the motor in the operator station. Pressing the motor-off switchreleases the remote or local switch if either was previously depressed.RemoteThis switch places the operator station in the remote mode of operation. When in remotemode, the operator station is controlled by the System/7.9-4 GA34-0003Ili 1 . I ponopipicHwIlworm•PPI iiicneumqopot IIIII III •10111 1 1,1n/R I ! MI 011.11r,