ZABER TECHNOLOGIES

More documents

Recommendations

Info

Stepper Motors: NM• Available in several sizes for a variety of torques and speeds• Resolution down to 0.028°• Designed for use with T-CD stepper motor controllersZaber’s NM series motors offer a wide range of size, torque, andspeed options not available in our motors with built-in controllers.NM series motors are available with speeds up to 1400 rpm andtorque up to 650 N∙cm (900 oz∙in).InstallationThe NM series motors are designed to connect directly to ourT-CD stepper motor controllers (purchased separately). The T-CDcontrollers can be daisy-chained with each other or any of Zaber’sT-Series products.Manual ControlA convenient knob on the T-CD controller permits smoothmanual control at variable speeds in both directions. During amanual move the motor’s position is constantly transmitted tothe computer and is displayed by the software. The knob on theT-CD controller allows you to use the NM motor even withouta computer.Computer ControlWe provide software so you can easily control your Zaber devices.Simply select the device you want to move, select a command(like “move absolute”), and enter the desired position. After themove, the controller reports the new position. Built-in scriptingallows you to easily set up complex automation routines. We alsoprovide all of our source code so that you can customize oursoftware for your application.32
<strong>ZABER</strong> <strong>TECHNOLOGIES</strong>Rotary MotionDimensionsSeries H (mm) A (mm) D (mm) D2 (mm) MNM08 20 15.4 4 16 M2 ThreadNM11 28 23 5 22 M2.5 ThreadNM17 42.2 31 5 22 #4-40 ThreadNM23 56.4 47.1 6.35 38.1 4.75 HoleNM34 85 69.6 12.7 73 6.5 HoleStepper Motors: NMSeries *Microstep Size(Resolution) (°)Accuracy(°)Repeatability(°)Minimum Speed(°/s)MaximumSpeed (rpm)MaximumTorque (N∙cm)Current Rating(mA/phase)NM08 0.0281 +/- 1 < 0.1 0.1318 Up to 1407 Up to 2.8 Up to 800 Up to 0.06NM11 0.0281 +/- 1 < 0.1 0.1318 Up to 1167 Up to 12 Up to 670 Up to 0.2NM17 0.0281 +/- 1 < 0.1 0.1318 Up to 417 Up to 32 Up to 1200 Up to 0.35NM23 0.0281 +/- 1 < 0.1 0.1318 Up to 700 Up to 135 Up to 1000 Up to 1.0NM34 0.0281 +/- 1 < 0.1 0.1318 Up to 202 Up to 657 Up to 2000 Up to 3.8* Due to the large number of NM models available, this table shows data for each series rather than for individual models. See our web site for morecomplete information on specific motors.Weight(kg)One of our primary goals at Zaber has always been to hire people who will enjoy their work. Our hobbies andinterests are reflected in the roles we play within the company, and most of us would be doing much the same workwhether we were being paid to or not. People who work happy work better, and that is reflected in the quality of ourproducts and customer service.– Rob Steves, President, Zaber Technologieswww.zaber.com33
Page 1 and 2: ZABER TECHNOLOGIESSimplifying Motio
Page 3: Simplifying Motion ControlTable of
Page 6 and 7: 6We specialize inmotion control tec
Page 8 and 9: SimplifyingMotion ControlZABER TECH
Page 10 and 11: SpinX Technologieswww.spinx-technol
Page 12 and 13: Miniature Linear Actuators: T-NA•
Page 14 and 15: Miniature Linear Actuators: T-LA•
Page 16 and 17: Linear Actuators: NA• Available i
Page 18 and 19: Motorized Translation Stages: T-LS
Page 20 and 21: Motorized Linear Slides: T-LSR• I
Page 22 and 23: Motorized Dovetail Slides: T-LLS•
Page 24 and 25: Manual Translation Stages: TSB• C
Page 26 and 27: T-JOY3 JoystickAt Zaber we often de
Page 28 and 29: Motorized Rotary Stage: T-RS• Con
Page 30 and 31: Stepper Motors with Built-In Contro
Page 34 and 35: T-LSR Linear SlideA lot of people w
Page 36 and 37: Motorized Mirror Mounts: T-MM• Tw
Page 38 and 39: WITec GmbHwww.witec.deWITec is a ma
Page 40 and 41: Stepper Motor Controllers: T-CD•
Page 42 and 43: Programmable Joystick Controller: T
Page 44 and 45: DistributorsaZaber Technologies Inc
Page 46 and 47: GlossaryAccuracyThe maximum deviati

ZABER TECHNOLOGIES

Create successful ePaper yourself

Delete template?

Save as template?