ZABER TECHNOLOGIES

Stepper Motors with Built-In Controllers: T-NM• Integrated motor and controller• Manual control knob lets you move the stepper motor at variable speeds• Daisy-chain and control multiple devices through a single serial portZaber’s T-NM products are computer controlled stepper motorswith 0.028° resolution. The stepper motor is matched to the builtincontroller, so there’s no need to fiddle with parameters.InstallationOne or more T-NM devices can be connected to the RS-232 port(or USB port with optional adaptor) of any computer. Multipledevices, including any T-Series products, can be daisy-chainedto a single port.Manual ControlAn optional knob at the end of the unit permits smooth manualcontrol at variable speeds. Turn the knob a little and the unit willmove at its minimum speed or turn it all the way for maximumspeed. During a manual move the motor constantly transmits itsposition so the controlling computer can track it.Computer ControlWe provide software so you can easily control your Zaber devices.Simply select the device you want to move, select a command(like “move absolute”), and enter the desired position. Afterthe move, the device reports its new position. Built-in scriptingallows you to easily set up complex automation routines. We alsoprovide all of our source code so that you can customize oursoftware for your application.30