ZABER TECHNOLOGIES

Motorized Linear Slides: T-LSR• Integrated motor and controller• Daisy-chain and control multiple devices through a single serial port• Ready to assemble in XY or XYZ configurationZaber’s T-LSR series products are computer controlled motorizedlinear slides with travel ranges from 75 mm up to 450 mm. Slidesare available with various leadscrew pitches so you can selectthe device with the resolution and speed capability you need.Zaber’s innovative slide design is capable of speeds up to80 mm/s, and can support loads up to 20 kg. These slides areready for assembly in XY or XYZ configuration with no additionalhardware required.InstallationOne or more slides can be connected to the RS-232 port (orUSB port with optional adaptor) of any computer. Multipledevices, including any T-Series products, can be daisychainedto a single port. Convenient 6-pin mini din cableson the slide allow for direct interconnection between devicesin close proximity. For longer distances, we offer standardcable extension.Computer ControlWe provide software so you can easily control your Zaber devices.Simply select the device you want to move, select a command(like “move absolute”), and enter the desired position. After themove, the slide reports its new position. Built-in scripting allowsyou to easily set up complex automation routines. We also provideall of our source code so that you can customize our software foryour application.Manual ControlA convenient knob permits smooth manual control at variablespeeds in both directions. During a manual move the slide’sposition is constantly transmitted to the computer and isdisplayed by the software. The knob allows you to use the stageeven without a computer.20