ZABER TECHNOLOGIES

Miniature Linear Actuators: T-LA• Integrated motor and controller• Standard mounting interface replaces most manual micrometers• Manual control knob lets you move the actuator at variable speeds• Daisy-chain and control multiple devices through a single serial portZaber’s T-LA series products are computer controlled linearactuators with up to 60 mm travel and 0.1 µm resolution.T-LA actuators keep their position even with no power applied,and if the actuator is idle, power to the motor is automaticallyremoved so it can stay cool. We also offer vacuum compatibleversions rated to 10 -6 Torr.InstallationOne or more actuators can be connected to the RS-232 port (orUSB port with optional adaptor) of any computer. Multiple devices,including any T-Series products, can be daisy-chained to a singleport. An industry standard 3/8˝ (9.5 mm) diameter micrometershank allows the T-LA to fit many popular stages. The plunger ofthe T-LA actuator does not rotate.Computer ControlWe provide software so you can easily control your Zaber devices.Simply select the device you want to move, select a command(like “move absolute”), and enter the desired position. After themove, the actuator reports its new position. Built-in scriptingallows you to easily set up complex automation routines. We alsoprovide all of our source code so that you can customize oursoftware for your application.Manual ControlAn optional knob permits smooth manual control at variablespeeds in both directions. During a manual move the actuator’sposition is constantly transmitted to the computer and is displayedby the software.14