C2-359 Fire Magic Heat Shield Kit Installation ... - Spotlight Retail

9. To lock the diverter tube in place, push out the innerliner wall, while pushing in on the diverter tube fromthe inside of the fi rebox (see Fig. 2-1 and Fig. 2-2).10. Push the diverter tube in completely until tabs clickinto place on each side (see Fig. 2-2 and Fig. 2-3).11. Replace the burner.12. Repeat for each additional burner as applicable.13. Reinstall the control panel, woodchip box (ifequipped), bezels (if equipped), and control knobs.Important: When re-installing the control panel, set itback over the front lip of the grill so thatthe lid-closed-sensor plunger protrudesthrough the hole on the upper right of thecontrol panel. Prior to opening the gasshutoff valve, be sure the control knobsare in the OFF position.Fig. 2-1 Locking diverter tube in placeFig. 2-2 Secure tabsFig. 2-3 Gasket installedREV 0 - 10111810252L-C2-359