Assembly Brochure (PDF 646KB) - Fusion Catamarans

1. The hulls are placed into the Jig2. the Port and Starboard Chamfer panels arebonded to the 2 hulls.Copyright Fusion Catamarans Australia P/L

5. The Compression Bulkhead withattached compression post is installed6. The Cockpit Bulkhead is positionedCopyright Fusion Catamarans Australia P/L

7. The port and starboard mouldings are nowbonded in position8. The supplied, pre-cut Flat Panels areplaced in position and The Outer Hulls are nowpositioned and bonded to the waterline hullsCopyright Fusion Catamarans Australia P/L

9. Port and Starboard steps arenext components to be added11. The Roof Centre sectionreally shows the familiar lineof the FusionCopyright Fusion Catamarans Australia P/L

12. The port and starboard roof sectionsbonded in place13. The final large section to go ontothe boat is the cockpit seatCopyright Fusion Catamarans Australia P/L

The hardest decision I have been told is “What are we going to call her”?Even at this stage, with motors steering and tanks, you have avessel that will give you endless days of fun afloatThe material in this Publication is c Copyright and its only permitted use is for the clients of Fusion Australia Pty Ltd and Fusion Marketing Ltd.Neither the publication or its contents are to be used without written permission for any other purpose.Copyright Fusion Catamarans Australia P/L