VISUCAM lite / C - Carl Zeiss

IntroductionVISUCAM1 Introduction1.1 PurposeThis DICOM Conformance Statement was written according to part PS 3.2 of [1].The intended audience for this Conformance Statement is hospital technical staff, system integratorsand software engineers. The reader is assumed to have good understanding of the DICOM standard.The Conformance Statement of one implementation can be compared with the ConformanceStatement of another implementation to determine which capabilities are commonly supported.DICOM does not, by itself, guarantee interoperability. Furthermore, the identification of commoncapabilities by comparing DICOM Conformance Statements is also not sufficient to guaranteeconnectivity between two devices.A DICOM Conformance Statement cannot replace validation and cross-vendor testing with otherdevices. Validation and cross-vendor testing are still required to ensure that both devices areperforming as intended.1.2 ScopeThe application described in this document is the VISUCAM Software from Carl Zeiss Jena GmbH,Germany. This software implements DICOM Offline Media Storage service and acts as File SetCreator.1.3 Definitions, Acronyms and AbbreviationsACR-NEMAAEDCOAmerican College of Radiology - National Electrical Manufacturers Association.Application EntityDICOM Composite Object. A DICOM object such as an image, overlay, lookuptable,waveform, presentation state or radiotherapy plan which can be stored usingthe Storage Service Class.Copyright © Carl Zeiss Meditec AG. All rights reserved.Alle Rechte vorbehalten.DIMSEDIMSE-CFSCIODPACSSCSCPSCUSOPUIDVRDICOM Message Service ElementDICOM Message Service Element -CompositeFile Set CreatorInformation Object DefinitionPicture Archiving and Communication SystemService ClassService Class ProviderService Class UserService Object PairUnique IdentifierValue RepresentationTable 1: Acronyms and abbreviationsCarl Zeiss Meditec AG Seite 3 von 10