Tubular Wires - Hobart Brothers

Mild Steel ElectrodesMild Steel ElectrodesHobart ® 335C Hobart ® 447AAWS E6011The versatile soft-arc electrode Hobart 335C isdesigned for AC power sources, but it can alsobe used on DCEP or DCEN. With the ability toweld through paint, mill scale or rust, it is anall-position cellulosic electrode with the ultimatein operator appeal.Typical applications:• general construction• light sheet metal fabrication• maintenance and repair welding• shipyards• welding on galvanized steels• welding through paint, mill scale or rustTypical weld metal properties(Chem Pad):Carbon ........................0.10Manganese..................0.84Silicon.........................0.40Nickel......................0.08Chromium ...................0.08Molybdenum ...............0.01Vanadium ....................0.01Typical mechanical properties (AW):Tensile Strength (psi) 85,000 (589 MPa)Yield Strength (psi) 71,000 (489 MPa)Elongation % in 2" 27%Typical Charpy V-notch impact values (AW):Avg. at -20°F (-29°C) 42 ft.lb. (57J)Available diameter andrecommended operating ranges:3/32" (2.4 mm)................60-90 amps1/8" (3.2 mm)..............80-125 amps5/32" (4.0 mm)............130-160 amps3/16" (4.8 mm)............160-190 ampsType of current: AC, DCEP or DCENApprovals and conformances:• AWS A5.1, E6011• ASME SFA 5.1• Lloyd’s 2m, 2Ym• ABS E6011AWS E6013When poor fit-up conditions exist, you’llprefer the fast-freeze characteristics of Hobart447A. Whether put to use with AC or DC powersources, the 447A has a very stable arc and goodbead appearance.Typical applications:• general-purpose fabrication• machine parts• metal buildings and structures• shaft buildupTypical weld metal properties(Chem Pad):Carbon .......................0.06Manganese..................0.38Silicon.........................0.30Nickel ..........................0.09Chromium ...................0.08Molybdenum ...............0.01Vanadium ....................0.01Typical mechanical properties (AW):Tensile Strength (psi) 74,000 (510 MPa)Yield Strength (psi) 64,000 (444 MPa)Elongation % in 2" 24%Typical Charpy V-notch impact values:Not requiredAvailable diameter andrecommended operating ranges:3/32" (2.4 mm)................40-80 amps1/8" (3.2 mm)..............70-120 amps5/32" (4.0 mm)............130-160 amps3/16" (4.8 mm)............140-220 ampsType of current: AC, DCEN or DCEPApprovals and conformances:• AWS A5.1, E6013• ASME SFA 5.1• ABS E6013Hobart ®447CAWS E6013A soft arc AWS 6013 electrode, Hobart 447Cis the best way to take control of poor fit-upconditions. It has fast-freeze characteristics,giving it preferred operator appeal. Hobart447C versatility extends its usage with AC orDC power sources and low open-circuit voltageAC machines.Typical applications:• general-purpose fabrication• machine parts• metal buildings and structures• shaft buildupTypical weld metal properties(Chem Pad):Carbon ........................0.09Manganese..................0.40Silicon.........................0.31Nickel ..........................0.02Chromium ...................0.03Molybdenum ...............0.01Vanadium ....................0.01Typical mechanical properties (AW):Tensile Strength (psi) 73,000 (502 MPa)Yield Strength (psi) 66,000 (454 MPa)Elongation % in 2" 24%Typical Charpy V-notch impact values:Not requiredAvailable diameter andrecommended operating ranges:3/32" (2.4 mm)................40-80 amps1/8" (3.2 mm)..............70-120 amps5/32" (4.0 mm)............130-160 ampsType of current: AC, DCEN or DCEPApprovals and conformances:• AWS A5.1, E6013• ASME SFA 5.1• CWB E4313• ABS E6013Mild Steel & Low Alloy ElectrodesFor additional information,see Hobart data sheet 612-C.For additional information,see Hobart data sheet 612-E.For additional information,see Hobart data sheet 612-F.www.hobartbrothers.com5