EO18-12003 - toshiba tec europe

8. DIAGNOSTIC TEST OPERATION (C model)EO18-12003(Revision Date: Jun. 21, 2002)8.4 DIAGNOSTIC OPERATION METHOD8.4.6 PS/2 Mouse TestThe connection of the PS-2 Mouse is checked.(1) Select “6. PS/2 Mouse Test” from the Main Menu by pressing [6] and the [ENTER] key.(2) The coordinate of the cursor and the button state are displayed on the screen.Diagnostic Program===== PS/2 MOUSE TEST =====Mouse Check (000:000) (0:0)(3) The message “Check OK? [OK:0/NG:9]” appears by pressing the [ESC] key. In accordance with the resultof this test, pressing [0] (OK) or [9] (NG) and the [ENTER] key will restore the display to the Main Menu.8.4.7 USB Mouse TestThe connection of the USB Mouse is checked.(1) Select “7. USB Mouse Test” from the Main Menu by pressing [7] and the [ENTER] key.(2) The coordinate of the cursor and the button state are displayed on the screen.********************** USB MOUSE TEST **********************(000:000) (0:0)(3) Pressing the [ESC] key will terminate this test and restore the display to the Main Menu.8.4.8 Speaker TestThe operation of the ST-60 Built-in Speaker is checked.(1) Select “8. Speaker Test” from the Main Menu by pressing [8] and the [ENTER] key.(2) When “Volume Check” is displayed, press any key of the keyboard. The ST-60's Built-in Speaker will beep.(3) Pressing any key again will stop beeping and restore the display to the Main Menu.8-9