EO18-12003 - toshiba tec europe

6. ST-60 BIOS SETUP (C model)EO18-12003(Revision Date: Dec. 23, 2002)6.4 EACH SETUP ITEM AND CORRESPONDING SELECTIVE ITEMS(7) Setup of Advanced Chipset ControlSetup Item Selective Item Default ValueVideo boot type: Disable Onboard Video | Onboard Video 512KB | Onboard Video 1MB Onboard Video 1MB *Enable Memory Gap: Disabled | ExtendedDisabledEnable D8 hole Disabled | Enabled DisabledEnable CD hole Disabled | Enabled EnabledLegacy USB Support Disabled | EnabledDisabledUSB #1 Controller Disabled | Enabled EnabledPCI Reset Disabled | 0S | 3S |15S 3SCom4 Info 270h | 2E8h 2E8hACPI Register Disabled | Enabled Enabled* For dual display model, [Disable Onboard Video] is shown as default value.DO NOT CHANGE the “Video boot type” setting.6.4.3 Security MenuSetup Item Selective Item Default ValueSet User Password Enter -Password on boot Disabled | Enabled (impossible to select unless setting password) Disabled6.4.4 Power MenuSetup Item Selective Item Default ValueWake On LAN Disabled | Enabled EnabledAC Power On Boot | No Boot No BootFront Switch Off | NotOFF&COM7IRQ Off *Init VGA First Internal VGA | External VGA Internal VGABacklight ON Timing After VGA BIOS | Before VGA BIOS After VGA BIOSRear Backlight Default On | Off On* OpenPOS mode is [NotOFF&COM7IRQ]-setting.6.4.5 Boot MenuSetup Item Selective Item Default Value6.4.6 Exit MenuRemovable devices | CD-ROM Drive | Hard Drive Removable devices| Network Boot | Intel(R) Boot Agent 3.0.04 Hard DriveCD-ROM DriveNetwork BootIntel(R) Boot Agent Version 3.0.04Setup Item Selective Item Default ValueExit Saving ChangesExit Discard ChangesLoad Setup Defaults (Compatible DOS/WinNT)Load Setup Defaults (Compatible Win98/Me)Load Setup Defaults (Compatible Win2000/XP)Load Setup Defaults (OpenPOS DOS/WinNT)Load Setup Defaults (OpenPOS Win98/Me)Load Setup Defaults (OpenPOS Win2000/XP)Discard ChangesSave Changes6-12