EO18-12003 - toshiba tec europe

6. ST-60 BIOS SETUP (C model)EO18-12003(Revision Date: Jul. 21, 2002)6.4 EACH SETUP ITEM AND CORRESPONDING SELECTIVE ITEMS(3) Setup of PCI ConfigurationSetup Item Selective Item Default ValuePCI Bus Master - -PCI/PNP ISA IRQ Resource Exclusion - -Sound/SMBus IRQ (PIRQB#) 9 | 10 | 11 | 12 | 14 | 15 5USB IRQ (PIRQD#) 5Onboard LAN IRQ (PIRQE#) 5(4) Setup of PCI Bus MasterSetup Item Selective Item Default ValuePCI Device Slot #0 Disabled | Enabled DisabledPCI Device Slot #1 Disabled | Enabled DisabledPCI Device Slot #2 Disabled | Enabled DisabledPCI Device On Board LAN Disabled | Enabled Disabled(5) Setup of PCI/PNP ISA IRQSetup Item Selective Item Default ValueIRQ 3: PnP | ISA PnPIRQ 4: PnP | ISA PnPIRQ 5: PnP | ISA PnPIRQ 7: PnP | ISA PnPIRQ 9: PnP | ISA ISAIRQ 10: PnP | ISA PnPIRQ 11: PnP | ISA ISA *IRQ 15: PnP | ISA PnP* OpenPOS mode is [PnP]-setting.(6) Setup of I/O Device ConfigurationSetup Item Selective Item Default ValueCOM port 1: Disabled | Enabled | Auto Enabled(Base I/O Address) (Only when designating Enabled : 3F8 | 2F8 | 3E8 | 2E8) 3F8(Interrupt) (Only when designating Enabled : IRQ3 | IRQ4) IRQ4COM port 2: Disabled | Enabled | Auto Enabled(Base I/O Address) (Only when designating Enabled : 3F8 | 2F8 | 3E8 | 2E8) 2F8(Interrupt) (Only when designating Enabled : IRQ3 | IRQ4) IRQ3COM port 3: Disabled | Enabled | Auto Enabled(Base I/O Address) (Only when designating Enabled : 3F8 | 2F8 | 3E8 | 2E8) 3E8(Interrupt) (Only when designating Enabled : IRQ10 | IRQ11) IRQ10 *COM port 4: Disabled | Enabled | Auto Enabled(Base I/O Address) (Only when designating Enabled : 3F8 | 2F8 | 3E8 | 2E8) 2E8(Interrupt) (Only when designating Enabled : IRQ12 | IRQ15) IRQ15LPT port: Disabled | Enabled | Auto Enabled(Mode) (When designating Auto or Enabled : Output Only | Bi-Directional) Bi-Directional| EPP | ECP(Base I/O Address) (Only when designating Enabled : 378 | 278 | 3BC) 378(Interrupt) (Only when designating Enabled : IRQ 7 | None ) IRQ7(DMA channel) (When setting LPT port Enabled and setting mode ECP : DMA 3 | DMA 1) -Floppy Disk controller: Disabled D Enabled | Auto Enabled(Base I/O Address) (Only when designating Enabled : Primary | Secondary) Primary* OpenPOS mode is [IRQ11]-setting.6-11