DEEP FAT FRYER

More documents

Recommendations

Info

SAFETY SYMBOLThese symbols are intended to alert the user to the presence ofimportant operating and maintenance instructions in the manualaccompanying the appliance.RETAIN THIS MANUAL FOR FUTURE REFERENCENOTICEUsing any part other than genuine Star factory supplied parts relieves themanufacturer of all liability.Star reserves the right to change specifi cations and product design withoutnotice. Such revisions do not entitle the buyer to corresponding changes,improvements, additions or replacements for previously purchasedequipment.Due to periodic changes in designs, methods, procedures, policies andregulations, the specifi cations contained in this sheet are subject to changewithout notice. While Star Manufacturing exercises good faith efforts to provideinformation that is accurate, we are not responsible for errors or omissionsin information provided or conclusions reached as a result of using thespecifi cations. By using the information provided, the user assumes all risks inconnection with such use.MAINTENANCE AND REPAIRSContact your local authorized service agent for service or required maintenance. Please record the modelnumber, serial number, voltage and purchase date in the area below and have it ready when you call toensure a faster service.Authorized Service AgentModel No.Reference the listing provided with the unitSerial No.orfor an updated listing go to:VoltagePurchase DateWebsite: www.star-mfg.comE-mailService@star-mfg.comTelephone: (800) 807-9054 Local (314) 781-2777The Star Service Help DeskBusiness 8:00 am to 4:30 p.m. Central Standard TimeHours:Telephone: (800) 807-9054 Local (314) 781-2777Fax: (800) 396-2677 Local (314) 781-2714E-mailWebsite:Parts@star-mfg.comService@star-mfg.comWarranty@star-mfg.comwww.star-mfg.comMailing Address: Star Manufacturing International Inc.10 Sunnen DriveSt. Louis, MO 63143U.S.A2 2
GENERAL INSTALLATION DATACAUTIONThis equipment is designed and sold for commercial use only by personnel trained andexperienced in its operation and is not sold for consumer use in and around the homenor for use directly by the general public in food service locations.Before using your new equipment, read and understand all the instructions & labelsassociated with the unit prior to putting it into operation. Make sure all peopleassociated with its use understand the units operation & safety before they use the unit.All shipping containers should be checked for freight damage both visible andconcealed. This unit has been tested and carefully packaged to insure delivery of yourunit in perfect condition. If equipment is received in damaged condition, either apparentor concealed, a claim must be made with the delivering carrier.Concealed damage or loss - if damage or loss is not apparent until after equipment isunpacked, a request for inspection of concealed damage must be made with carrierwithin 15 days. Be certain to retain all contents plus external and internal packagingmaterials for inspection. The carrier will make an inspection and will supply necessaryclaim forms.WARNING: Improper installation, adjustment, alteration, service ormaintenance can cause property damage, injury or death. Read theinstallation, operating and maintenance instructions thoroughly beforeinstalling or servicing the equipment.This fryer is equipped for the voltage and wattage indicated on the nameplate mountedon the underside of the front edge. It is designed for use on alternating current (AC)only. It is intended for use by properly trained personnel only.WARNINGDO NOT CONNECT TO DIRECT CURRENT (DC)The installation of the appliance should conform to:NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES ANDORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES ANDREGULATIONSProper connections and power supply are essential for effi cient performance. Connect sixfoot lead in cord to a suitable grounded outlet of the correct voltage. Be sure the switch isin the off position. The receptacle should match the plug (NEMA confi guration of receptacleis: 6-30R). Four legs are provided and should be installed for ease of cleaning. Level unitby adjusting the (4) feet which have an adjustment of 1-3/8" (35 mm) for accurate levelingand perfect line-up with other units.POWER SUPPLYThe Model 301HLD is wired at the factory for operation on a single phase powersupply 208/240V, 60 Hz.CAUTIONDO NOT INSTALL WITHOUT FEET.PLACE THE LAMINATED WARNING SIGN SUPPLIED WITH THE <strong>FRYER</strong> IN ANAREA VISIBLE TO THE <strong>FRYER</strong> OPERATOR.3
Page 1: ®DEEP FATFRYER® ®MODEL301HLD SER
Page 5 and 6: DRAINING KETTLETurn switch to "OFF"
Page 7 and 8: CARE OF FATIn three to six months y
Page 9: Visit our Website at: www.star-mfg.
Page 12: PARTS LISTDecember 20, 2005, Rev DM

DEEP FAT FRYER

Create successful ePaper yourself

Delete template?

Save as template?