A6 Series Brochure

5100 Series Draper HeadersThe 5100 Series draper headers offer 41.5 in. (1,054 mm) widerubberized drapers to help reduce losses in easily threshed crops.Gap-free placement reduces grain loss. Available in 25-ft. (7.6 m),30-ft. (9.1 m) and 36-ft. (10.9 m) widths, with a choice of universalU2 pickup or polytine pickup reel to match your cropping needs.Four coil springs provide six degrees of lateral fl oat and 8 in.(203 mm) of vertical fl oat, independent of the combine.ModelSizes5100 25' (7.6 m) - 30' (9.1 m) - 36' (10.9 m)An independent hydraulic drivesystem contains its own reservoirpump and fi lter for reliable powerto the cutterbar and side drapers.Hydraulically driven SCH planetarygear sickle drive system movesthe sickle at 1,200 strokes/minwith a 3 1 /8-in. (80 mm) stroke forsmooth cutting and increasedperformance.The reinforced, rubberized canvasdrapers feature slats constructedof reinforced fiberglass forstrength and durability.7200/8200 Series HeadersThe 7200 Series rigid cutterbar headers begin with a solid-welded steel frame for a rock-rigid foundation. SCH epicyclic drive system assures a fasterlinear cut with less vibration. Plus, the precision factory-balanced conveyor with exclusive 7-in. (178 mm) auger fl ighting also reduces life-sappingvibration and ensures smooth crop fl ow. Available with new level-2, HCC pickup reel in widths up to 35 feet (10.6 m). Electric, in-cab fore-and-aft reeladjustment comes standard, so you can adjust to changing crop conditions on the fl y—even through lodged and weedy patches.SCH fully enclosed epicyclicsickle drive provides a smoothlinear movement that reducesstress, wear and vibration forbetter cutting performance.Optional SCH cutterbar kniveson the 8200 bolt to the bar inalternating pattern to cut onboth the top and bottom, vastlyincreasing cutting effi ciency andextending wear life.New optional orbit reel kit reducesthe amount of material buildupbehind the cutterbar for a bettercrop fl ow.Model Type Sizes7200 Rigid Cutterbar 25' (7.6 m), 30' (9.1 m), 35' (10.6 m)8200 Flex Cutterbar 20' (6.0 m), 25' (7.6 m), 30' (9.1 m),35' (10.6 m)The 8200 Series fl ex headers start with all the standard features of the 7200, then add a choice of two sickle options: standard sickle or SCH sickle andguards. Its full-fi ngered auger with 7-in. (178 mm) fl ighting ensures smooth crop fl ow out to its maximum 35-ft. (10.6 m) header width. New lightweightHCC reel design provides greater strength with increased visibility.