A6 Series Brochure

BETTER RESIDUEMANAGEMENT.BECAUSE EVERY PARTOF THE CROP COUNTS.The straw chopper is mounted to the combineon a rail system which allows movementbackward for direct discharge with the use ofthe header latching wrench.Today’s cropping conditions have evolved toward no-till and minimum-till with increasedfocus on residue management and higher relative value of material other than grain (MOG)as a marketable cash crop in itself.Whether factory- or fi eld-installed, our residue-disposal choices will fi t a wide varietyof needs, from spreading the aftermath as thinly and uniformly as possible for betterrecapture of nutrients, to dropping it smoothly behind in a 50-inch (1,270 mm) windrow ofunchopped, undamaged material ideally suited to make the highest-quality baled bedding orfeed forage.For extra heavy chaff spreading, an optional chaff spreader is available with two hydraulicdrivenimpellers to provide extra wide distribution.No need to chop the straw? Use the dualdisc spreader to distribute material evenly onthe fi eld. The discs can be easily removed ifno spreading is required.The air-assisted chaff spreader on the A6Series is integrated into the combine’s design,not added on. Gas-charged cylinders pivotthe entire assembly to the storage-serviceposition, allowing access to rear of combine.