13449_2011 Motion Concepts solutions brochure.pdf - GTK Rehab

PRODUCT REFERENCE:UPLIFTDesigned to assist clients with forward transfers, this system can achieve a near standing position by mechanicallyopening the back angle and extending the platform while the seat is lifted forward. Not modular, not available withposterior tilt. Also see anterior tilt.HORIZONTAL TILTThe horizontal tilt system is an innovative, highly adjustable power positioning system that can be configured for aclient to operate in a prone, supine or side lying position. It features a unique, adjustable center section withtelescoping, angle-adjustable supports on both ends to assist with visibility, repositioning and transfers.LATERAL TILTOur lateral tilt module enables a tilt or tilt/recline system to tilt laterally (side to side) in either direction. The systemcan also tilt or tilt/recline when laterally tilted. This feature is effective for pressure reduction, as well as aiding inclient transfers, and can also help alleviate digestive pressure and respiratory issues.SEATINGThe Invacare Matrx seating line provides expert seating solutions for a wide range of client needs, from cushions andbases, to backs and other accessories. These amazing products can help maximize comfort, give support and stabilityfor a wide range of clients — pediatric to geriatric, from those with limited mobility to more active individuals.ACCESSORIESOur selection of unique accessories has been created to enhance your clients’ comfort, positioning, stability, and qualityof life.VENTILATOR SUPPORT OPTIONSA variety of vent trays and battery trays are available to suit many clients’ needs. Vent battery trays are ideally mountedonto the power base rather than on the back of the seating system, to ensure that the additional weight is distributedproperly for stability. Our vent trays and battery trays are typically designed to maintain a short profile, so as not tocompromise the drive characteristics of the power base.O2 HOLDERWe offer a variety of both fixed and articulating O2 holders. Whether your clients use a portable liquid unit or acompressed gas cylinder, our sturdy, durable steel O2 holders accommodate most sizes and shapes of O2 cylinders fromthe most popular portable unit manufacturers.FRONT RIGGINGOur wide range of power and manual front riggings are available in an array of styles and sizes to help secure andposition clients’ legs. In addition, we carry a multitude of legrest hangers to accommodate your front rigging choice.ARMRESTOur sturdy and durable armrests help support the arm with minimal play, and can be flipped back for easy,obstruction-free side transfers. We offer an extensive variety of easily adjustable and removable armrests for virtuallyall client needs, from pediatric to bariatric.SPECIALIZED SEATINGOur talented team of product designers and engineers quickly adapt or create customized, market-driven, and oftengroundbreaking solutions to meet individual clients’ needs. These systems are uniquely built and customized, and manybecome part of our standard product offering, as market demands dictate.ELECTRONICSOur state-of-the-art electronics allow users to operate their power positioning system in a simple and safe manner.Our electronics range from programmable motor control relay boxes, power cables and actuator harnesses, to a widerange of operating switches, toggles and specialized controls. System electronics will vary with the complexity of theseating system to which they apply and the type of power base on which they are installed. Designed to interface withall power base electronics platforms and specialty drive controls – including Q-Logic, MK6, RNet & DX2.

POSITIONING OPTIONS:ULTRALOW MODULAR SYSTEMF-SERIES TILT SYSTEMBARIATRIC SYSTEMPEDIATRIC SYSTEM ELEVATE ONLY SYSTEM ULTRALIFT SYSTEMRECLINE WITHPOWER SLIDING BACK SYSTEM INTERFACE SYSTEM PRECLINE SYSTEM3

POSITIONING OPTIONS:ANTERIOR TILT & ASSIST SYSTEMUPLIFT SYSTEMLATERAL TILT SYSTEMHORIZONTAL TILT SYSTEM LATITUDE SYSTEM ATTITUDE SYSTEMHIGH PIVOT MECHANICAL SHEARREDUCTION MODULE SLING SEAT SYSTEM ADJUSTABLE HI-PIVOT PRECLINE SYSTEM4

INVACARE MATRX CUSHION & BACK OPTIONS:MATRX PS CUSHION KID*AB*RA CUSHION MATRX VI CUSHIONMATRX VI FABRIC OPTIONSMATRX FLO-TECH CUSHIONOnyx Fabric OptionFusion Fabric OptionPediatric: 12", 14" W x 12", 14" &16" D; 150 lb weight capacityStandard: 16", 18" & 20" W x 16",18" & 20" D; 300 lb weightcapacityBariatric: 21"-30" W x 16"-30" D;600 lb weight capacityPediatric: 12", 14" W x 12", 14" D;150 lb weight capacityStandard: 14", 16", 18", 20", 22" &22" W x 15", 16", 17", 18" & 20" D;300 lb weight capacityBariatric: 18"-30" W x 18"-26" D;600 lb weight capacityOnyx Cover Option: leatheretteouter cover>Offered on Invacare Matrx Vi,Kid*ab*ra and PS cushionsFusion Cover Option: A combinationof Onyx and Matrx outer cover>Offered on Invacare Matrx Vi,Kid*ab*ra and PS cushionsStandard: 14"-20" W x 14"-21" D;300 lb weight capacityBariatric: 20"-24" W x 18", 20" &22" D; 500 lb weight capacityMATRX ELITE BACKMATRX ELITE DEEP BACKMATRX ELITE FULL BACKMATRX GENERA BACKStandard: 12"-20" W x 10", 12", 14",16", 18" & 20" H; 300 lb weightcapacity>3" contour depthStandard: 14"-20" W x 12", 16", 18" &20" H; 300 lb weight capacity>6" contour depthStandard: 16"-20" W x 20" H;300 lb weight capacity>3" contour depth>No scapular cut-outsStandard: 16", 18" & 20" W x 16" &20" H; 300 lb weight capacity>3" contour depthMATRX PB BACKMATRX PB DEEP BACKMATRX PBHEAVY DUTY BACKMATRX PB DEEPHEAVY DUTY BACKStandard: 14", 16", 17", 18" & 20" Wx 12", 16" & 20" H; 300 lb weightcapacity>5" contour depthStandard Deep: 14"-20" W x 12", 16" &20" H; 300 lb weight capacity>7" contour depthHeavy Duty: 20", 22" & 24" W x 16" & 20" H;500 lb weight capacityExtra Wide: 24"-30" W x 16" & 20" H;500 lb weight capacity>5" contour depthDeep Heavy Duty: 20", 22" & 24" W x 16" & 20" H;500 lb weight capacityDeep Extra Wide: 24"-30" W x 16" & 20" H; 500 lbweight capacity>7" contour depth5

BACK OPTIONS:STANDARD REHAB BACKRECESSED PLANAR INTERFACE PLATE7One part construction: 12"-21" wideTwo part construction: 16"-20" wideTwo part construction: 21"-26" wide>Curved, rigid design>Comes with 1" foam paddingwrapped over top of pan to preventThree part construction: 27"-34" widesliding and to protect client>Made of sturdy steelPediatric: 12"-14" W x 12"-14" H; 150 lb weight capacityStandard: 15"-21" W x 12"-20" H; 300 lb weight capacityBariatric: 21"-34" W x 12"-20" H; 500 lb weight capacityI BACK INTERFACE PLATE>Adjustable width interface for mounting after-market backs toRecline or Tilt/Recline ESR or PSB systems>Recessed 0.5" between back postsStandard: 16"-20" W x 12" heigh; 300 lb weight capacityBariatric: 21"-32" W x 12" heigh; 500 lb weight capacityCONTOUR BACK HIGH BACKThree part construction: 21"-32" wideSINGLE POST BACK>Multi-adjustable interface for mounting I shaped, after-market backson ESR and PSB systems>I Back is 3" narrower than the width of the back canesStandard: 16"-21" W x 21" H and up; 300 lb weight capacityStandard: 15"-21" W x 12", 15", 17" &21" H; 22" W x 15", 17" & 21" H;300 lb weight capacityStandard: 16"-21" W x 20", 22"& 25" H ; 300 lb weightcapacityMESOMORPH & ENDOMORPHBACK CANES RECLINE BODY FIT POWER SLIDING BACK (PSB)>Eliminates dual back canes; foldsforward for transport>Back angle adjusts in 6° incrementsfrom 91° to 127º>No charge option with UltraLowCG tilt systems>Optional with F-series tilt systems>Fits most standard tilt and/or elevatesystems and requires Dual Post armrest; accepts swing-away lateralsStandard: 16"-20" W x 21"-24" H;250 lb weight capacityEXTENDED SHEAR REDUCTION (ESR)MESOMORPHENDOMORPH>Designed to suit clients who are wider at theirtrunks than at their hips or reversed>Clearance for redundant tissue at hips/lower back>Available in 1", 2" or 4" seat variances (6" totalwith armrest spacers)>Back canes available in 22" or 24" heights>Not available with recline>Comes in two standard width reductions of2" or 4">May be used with armrest spacers to provide a6" difference>Recline canes are mounted in towards center tomaintain a smaller profile>Reclining armrests are offset to help keep clients’arms in a more neutral position>Available on back widths 16" or greater>Allows independent back movement up to 3"while still in synchronization with recline>Can be used with most standard Motion Concepts’backs greater than 20" in height>Requires enhanced electronics for independentoperation>ESR is synchronized with recline to reducethe amount of shear>Employs a linkage that slides the backreston the backposts through the recline cycle>Adjustable shear compensationfrom 3" - 5"6

HEAD SUPPORT OPTIONS:FIXED MOUNTING HARDWARESTANDARD HARDWAREMULTI-AXIS HARDWARESTEALTH ”WORLD’S BEST”HARDWARE>Dual pivot ball for pad orientation>Limited adjustability – recommendedfor Contour or High backs only>Height adjustable>Includes fixed mounting clamp>Offered with Motion Concepts’Standard, Stealth All Positioning andComfort Plus as well as Onyx AutoStyle headrests>Comes standard with Otto Bock,Motion Concepts’ Standard & StealthComfort Plus Pads>Height adjustable>Depth adjustable>Single point multi-axis adjustability>Upgrade option for Otto Bock,Motion Concepts’ Standard & StealthComfort Plus pads>Dual pivot balls for pad orientation>Depth adjustable through horizontalslide bar>Height adjustable>Includes mounting clamp forattachment to back with knob stylerelease for headrest removal>Upgrade option for Otto Bock,Motion Concepts’ Standard & StealthComfort Plus Pads>Dual pivot balls for pad orientation>Depth and height adjustable throughdual link system>Includes mounting clamp forattachment to back with latch stylerelease for headrest removalMOTION CONCEPTSSTANDARD HEADRESTSTEALTHALL POSITIONING HEADRESTSTEALTH NINOCOMFORT PLUS HEADRESTSTEALTHCOMFORT PLUS HEADRESTONYX AUTO STYLEHEADREST>Easy to clean self-skinningpolyurethane foam>Gentle lateral contouring>Available in 1 pad size:Size: 6.5" W x 7" H>Soft, comfortable layered foam oncoated metal shell>Removable, washable cover>Available in 2 pad sizes:Large: 9.75" W x 1.75" D x 5.25" HX-Large: 12" W x 3" D x 6" H>Soft, comfortable layered foam oncoated metal shell>Removable, washable cover>Available in 1 pad size:Size: 6" W x 3.75" H>Soft, comfortable layered foam oncoated metal shell>Removable, washable cover>Available in 3 pad sizes:Small: 8" W x 6" HMedium: 10" W x 6" HLarge: 14" W x 6" H>Onyx leatherette cover>Auto-style contouring>Available in 1 pad size:Size: 8" W x 4" D x 8" H7

VENTILATOR, O2HOLDER & IV POLE OPTIONS:BACKPACK LTV COMPACT STYLE VENT TRAY ARTICULATING VENT TRAYGIMBAL VENT TRAY>Designed to carry the latest, most compactvent systems>Allows use of the "TBS" system (self containedvent and battery in carrying case), whichincludes the Lithium Ion battery>Adds 4" to overall length of the system>Articulating or clamp mount>Allows for easier transfers with ventilator stillattached>Holds units up to 11" W x 8" D x 13" H>Designed for use with the latest, most compactvent systems>Fits standard Motion Concepts’ backs>Held firmly in place with removable, quickrelease protective front or one piece, easyaccess cover>Clear acrylic view window to monitor ventactivity>Battery options: M40, U1, 22NF or LithiumIon, depending on base>Articulating or clamp mount>Holds units up to 11" W x 4" D x 13" H>Available with Tilt and Recline systems>Maximum 45° of Tilt and 174° Recline travel>Vent tray stays level through travel range>Holds units up to:Vertical: 14.625" W x 10.125" D x 13" HHorozontal: 14" W x 15" D x 10" H>Pivots freely through movement during Tiltand Recline>Fits virtually all available vent types>Rubber stopper helps cushion vent movement>Available with or without battery tray>Holds units up to 14" W x 15" D x 10" HLIQUID O2 HOLDERO2 GAS CYLINDER HOLDERARTICULATING COMPACT ORLAPTOP VENT TRAY WITH O2GAS CYLINDER HOLDERIV POLE>Specifically sized to accommodate many of themore popular portable unit manufacturers>Articulates to keep cylinders vertical during Tiltand Recline, ensuring liquid does not drip out>Holds units up to 6.5" W x 4.5" D>Accommodates steel and aluminum D & E sizecylinders, and others in the 16"-24" range witha maximum diameter of 4.875">Optional articulation helps keep cylindersupright and prevents interference with the base>Maximum 45° of Tilt travel>Designed for use with the latest, mostcompact vent systems>O2 gas cylinder holder can be mounted alongwith any Motion Concepts’ vent trays>Accommodates steel and aluminumD & E size cylinders, and others in the16" - 24" range with a maximumdiameter of 4.875">Holds units up to 11" W x 4" D x 13" H>Telescoping 6 positions>Chrome finish>Articulating or non-articulating8

FRONT RIGGING OPTIONS:SWING-AWAY POWER ELEVATING PIVOT PLUS LEGRESTSWITH CAMLOCK RECEIVERSCMX - CENTER MOUNTARTICULATING FOOT PLATFORMCMB - BELT ADJUSTABLE CENTERMOUNT ARTICULATING FOOTPLATFORMMANUALPOWER>This center mount articulating foot platform hasa quiet, powerful direct drive actuator and 75°of elevation from starting position>Pivot point sits below the seat pan, leg anglecan be set to 3 different angle settings90°, ±7°>Up to 7" of foot platform articulation dependingon lower leg length with adjustable plantarflexion at the beginning of range which can helpreduce stretching of hamstring and calf muscles>Dynamic calf pads that support lower legsthrough elevation>Our design allows the amount of footplatform articulation to be tightly controlled,with the added benefit being a “non-fixed”legrest extension tube that retracts whencontact is made with a hard surface (i.e.the floor, curbs, etc.)>Pivot point sits at the seat pan and like LNX& CMX the CMB, leg angle can be set to 3different angle settings 90°, ±7°>Accommodates short leg lengths and thearticulation of the foot plate can be adjustedfrom 3" to 7.25">Standard one-piece calf panel or optionalindividual calf pads are available>Integrated power actuator allows the legrest to easily swing-away without unhooking the actuator>Leg has free movement around the front of the chair to aid in positioning and transfers>The Swing-Away Calf Pad mechanism allows calf pads to drop or “flip back” behindthe client’s calves for convenience>Straight or flared outward receivers available>Rollers on footplates assist in opening doors>Rollers on down tubes also prevent legrests from digging into ground>Extension lengths:Short: 12" - 16"Medium: 15" - 19"Long: 18" - 21"BARIATRIC ELEVATING AND ARTICULATING CALF PANELTAPERED MANUAL ELEVATINGFOOT CAGEVERTICAL LIFTING PLATFORM>Width and depth adjustable>Velcro adjustable calf strap>Manual lever for elevation adjustment can bemounted on either left or right sideFootplate size: 8.5" W x 7.25" D>Platform has 11" of available vertical travel>Weight capacity of up to 200 lbs.>Chair must be driven in 5° of pre-tilt>Available on UltraLow Tilt, Tilt/Reclineand Elevate systems>Designed to address the unique positioning, transfer and weight distribution needs of bariatric clients>Elevating Calf Panel articulates to reduce calf shearing>Available on systems up to 36" wide; 600 lb weight capacity>Available with Power Sliding Seat Systems10

FOOT PLATE & FOOT PLATFORM OPTIONS:INDIVIDUAL FOOT PLATE OPTIONS FORINDEPENDENT ELEVATING & ARTICULATINGLEGRESTS (CENTER MOUNTED)MULTI-AXIS FOOTPLATE MOUNT>Foot shaped with heel loopSize: 6" W x 11" D (each)>Solid clamping mechanism securely locksfootplate in virtually any position>Low-profile clamp is adjusted with one tool>Able to capture complex positions of footand ankle>Interfaces with all Motion Concepts’ footrestsFLIP-UP FOOT PLATFORM OPTIONS FORPOWER & MANUAL CENTER MOUNT FRONT RIGGINGSmall: 12" W x 8.5" D Medium: 12" W x 10.75" D Large: 17" W x 14.75" D Extra Large: 21" W x 14.75" DINDIVIDUAL, CAST ALUMINUM FOOT PLATE OPTIONS FORCMB, CMX, LNX AND FIXED & ADJUSTABLE 70-90° CENTERMOUNT PLATFORMS> Built in heel cups & rubber matSmall: 5" W x 7.5" D (each)FOOT PLATE OPTIONS FORELEVATING AND TILT FRONT RIGGING> Built in heel cups & rubber matMedium: 5.5" W x 9.5" D (each)> Built in heel cups & rubber matLarge: 6" W x 11.5" D (each)Small: 4.25" W x 8" D (each) Medium: 5.25" W x 8" D (each) Large: 6.25" W x 8" D (each)Extra Large: 9" W x 11" D (each)Small: 7.25" W x 9" D (each) Medium: 7.5" W x 11" D (each) Large: 10" W x 14" D (each)11

ARMPAD & ARMPAD ACCESSORY OPTIONS:1. STANDARD ARM PADS2. WATERFALL ARM PADSGEL ARM PADSMULTI-POSITION FLAT ARM PADWITH BUMPER GUARDSERGONOMIC ARM TROUGHFLAT HAND PAD12STANDARD ARM PADS>Standard on all Motion Concepts’ systems>Sold as a pair or individual>Available in 2 sizes:Full: 2.25" W x 14" LDesk: 2.25" W x 10" LWATERFALL ARM PADS>Pad is shaped to 'fall' over armrest bar>May be mounted inward or outward>Sold as a pair or individual>Available in 2 sizes:Full: 2.25" W x 14" LDesk: 2.25"W x 10" L>Fabric covered polymer gel arm pads>Provides extra protection for highlysensitive arms>Available in 3 sizes:Narrow: 2" W x 12" LWide: 3.5" W x 12" LLong: 3.5" W x 14" L>Soft, gel-like feel provides extracomfort and protection for arms>Highly durable skinned polyurethane withbumper guards protect against crackingand peeling>Triple track extrusion allows adjustability ofmounting position and attachment locationfor other accessories>Available in 2 sizes:Full: 3" W x 14" LDesk: 3" W x 10" LERGONOMIC ARM TROUGH>Molded, skinned polyurethane>Ergonomic shape fits the naturalarm curvature>Unique cut-out at elbow provides users withflexibility of various arm positions>Triple track extrusion allows a variety ofmounting positions>Modular hand pads from other manufacturersmay be interfaced using special adapter(see below)>Available for left or right sideSize: 4.5" W x 13" LFLAT HAND PAD>Hand pad is an optional add-on andavailable for left or right sidePad Size: 4.5" W x 5" LELBOW BLOCKSTEALTH SWING-AWAY ELBOW STOPARMPAD ACCESSORIESARMREST ADJUSTMENTSACDBBA>Prevents arms from falling back while tilted>Can be positioned to provide comfortablesupport to upper arms>Easily removable, multi-adjustable mountingavailable in 3" or 5" of vertical extension and5" or 7" of horizontal extension>Rotational pad adjustment>Available in 4 pad sizes:X-Small: 4.25" W x 3.25" HSmall: 5.25" W x 3.5" HMedium: 7.75" W x 3.75" HLarge: 6.5" W x 4.25" H>Uses Stealth adjustable swing-away system tocomfortably support client’s elbows andupper arm>Available in 3 sizes:Small: 3" W x 3" HMedium: 4" W x 4" HLarge: 10" W x 3" H (U shaped)A- Otto Bock FLAT HAND PADB - Otto Bock ACCESSORY ADAPTER>For adding Otto Bock modular hand pads toMotion Concepts’ Ergonomic Arm Trough(see above)C - ARMREST EXTENSION TUBE>Extends arm pads 3.5"D - ARMREST EXTENSION TUBE>Extends arm pads 7"A - ARMREST SPACERS>Allows 0.5" or 1" space in armrest mounting>May use one or two spacers>Beneficial in growing seat widthsB - ARM PAD OFFSET EXTENSION>Moves arm pad 0.75" out or in>Stability for mounting flat accessories andarms to round tubes12

ARMREST OPTIONS:HEIGHT AND ANGLE ADJUSTABLECANTILEVER FLIP BACK TILT ARMWITH CAMLOCKRECLINING ADJUSTABLE HEIGHTARMRESTHEIGHT AND ANGLE ADJUSTABLECANTILEVER FLIP BACK RECLINE ARMWITH QUICK LOCK MECHANISMHEIGHT AND ANGLE ADJUSTABLECANTILEVER FLIP BACKRECLINE ARMREST>Latch Plate permits the attendant to releasethe armrest to be flipped back>12° of angle adjustment>In the upright position armrest can beadjusted to the desired angle>Flip back and removable for easier transfers>Height adjustable in 2 ranges:Standard: 9.5" H- 18.5" HPediatric: 7.75"H - 10" H>Adjustment range is 3">Locks armrest in down position for stabletransfer/re-positioning surface>Optional for Tilt or Recline Cantilever arms>Easy access release mechanism>Arm retains ability to flip back completely>Designed for Recline and Tilt/Recline Systems>Armrest can be configured to be parallel orperpendicular to the seat frame when fullyreclined>Arm retains ability to flip back completely>Independent height and angle adjustmentDUAL RELEASE LOCKING ARM - Single hand releaseATTENDANT MODECLIENT MODEOPTIONAL FOR RECLINE SYSTEMSRECLINE CANTILEVER ARMREST>Designed to pivot around its mounting point for easy side transfers>Trigger Switch and Latch Plate permits the user and/or attendant to release the armrest with one hand>Armrest can be configured to be parallel or perpendicular to the seat frame when fully reclined>In the upright position armrest can be adjusted to the desired angle>Can accommodate arm heights as low as 8.25"13

ARMREST OPTIONS:ADULT DUAL POSTADJUSTABLE HEIGHT ARMRESTPEDIATRIC ADJUSTABLE HEIGHTARMRESTGLOVE BOXCUP HOLDER/STORAGE ARMREST>Durable, precision machined rear pivot forlong-term stability and tolerance>Flip back and removable for easy transfers>Height adjustable in 3 ranges:Small: 9.75" H - 12.75" HMedium: 12.75" H- 15.75" HLarge: 15.75" H - 18.75" H>Optional quick height adjustment leveravailable at nominal upcharge>Specially created and scaled down for kids>Durable, precision machined rear pivot forlong-term stability and tolerance>Flip back and removable for easy transfers>Height adjustable in 3 ranges:Small: 6" H - 7.5" HMedium: 6.75" H - 8.25" HLarge: 8.25" H - 9" H>Sleek and modern automotive look>Quad release and closure for clients withlimited dexterity>Made of sturdy, durable material>Available on Motion Concepts’ dualpost arms only>No charge option with UltraLow systems>Retractable cup holder fits most standardcans or bottles>Arm pad flips open to store items>Comfortable, padded armrest>Available for left or right sideSize: 4" W x 14" LPOWER FLIP BACK DUAL POST ARMOUTBACK ARMPOWER OR MANUALFLIP DOWN TRANSFER ARM>Arm is powered to flip back 90°>Available on UltraLow CG tilt systems and elevate-onlysystems which utilize a dual post, height adjustable armrest>Height adjustment is not compromised with the power flipback feature>May be used with dual post height adjustable arms withquick height adjustment lever>All arm pad options are still available>Elbow blocks may be added>Available for left or right side>Available for the Motion Concept’s dual post tilt armrest orthe recline armrest>OutBack Arm pivots 30° outward to allow clearance forArm Troughs, lateral supports and other positioningcomponentsMULTI-AXISUPPER EXTREMITY SUPPORT>Single locking bolt or ratchet allows infinite adjustment of angle and rotation of armpad or arm trough>Ability to capture complex positions of client’s arm/hand>Universal 0.875" clamp which allows it to fit on any wheelchair armrest, manual or power>Low profile bracket easily interfaces with the Motion Concepts’ gel armpad, Arm Trough orMulti-Position Flat Armpad>Transfer arm available with power or manual drop down function>Power version operates through a separate switch or through thejoystick control>The manual version uses a small manual linkage located at thebottom of the armrest>Client can slide/shuffle along seat pan onto armrest foreasy transfer>Weight capacity: up to 200 lbs>Available left or right14

LATERAL HIP AND TRUNK SUPPORT OPTIONS:LATERAL HIP/KNEE SUPPORT WITH SWING-AWAY REMOVABLE HARDWARELATERAL HIP SUPPORT WITH FIXED OR REMOVABLE MOUNTING HARDWARE>Flexible mounting locations at hip, knee or both>Height and depth adjustable>Rotational adjustment at pad and clamping bar for maximumabduction and adduction adjustment>4 pad sizes available: (see below)>2.5" of height adjustment in 0.625" increments.>Low profile hardware does not interfere with armrests>Each hip support pad can be moved forward and back on bracket in 1" increments>Lateral hip pad standard with fixed hardware>Optional removable hardware upgrade>4 pad sizes available: (see below)HIP PAD SIZESXS:5.5" W x 4" HS: 7.5" W x 6" HM: 9" W x 4" H L: 13" W x 4" HLATERAL TRUNK SUPPORTS WITH STEALTH PUSHBUTTON TELESCOPING SWING-AWAYMOUNTING HARDWARELATERAL TRUNK SUPPORTS WITHFIXED HARDWARELATERAL TRUNK SUPPORTS WITHSWING-AWAY HARDWARE>Easy to access, push button release>Low profile design does not interfere with flip back armrests>180° swing-away mechanism prevents damage to lateral hardware>2 Stealth lateral pad sizes: (see below)>Designed especially for Contour or High backsproviding infinite/easy adjustability up and down>4 pad sizes available: (see below)>Designed especially for Contour or High backsproviding infinite/easy adjustability andobstruction-free transfers>4 pad sizes available: (see below)STEALTH LATERAL PADSLATERAL PAD SIZESS:5" W x 3" HL:6" H x 4" WXS:3.25" H x 4.25" WS:3.5" H x 5.25" WM:3.75" H x 5.75" WL:4.25" H x 6.5" W15

INVACARE MATRX ELITE LATERAL SUPPORT OPTIONS:SWING-AWAY LATERALS OFFSET SWING-AWAY LATERALS FIXED LATERALS OFFSET FIXED LATERALSRANGE OF ADJUSTMENT (VIEW OF HARDWARE MOUNTED INSIDE THE BACK SHELL )>Designed especially for Invacare MatrxElite backs> 2.5" of vertical adjustment on back pan> Mount inside back shell withoutinterfering with depth/angle adjustment> Easy push button release>Available for left or right side>4 pad sizes available: (see below)>Designed especially for Invacare MatrxElite backs>Provides an additional 3" of vertical position(higher or lower) relative to mounting slots> Mount inside back shell withoutinterfering with depth/angle adjustment> Easy push button release>Available for left or right side>4 pad sizes available: (see below)>Designed especially for Invacare MatrxElite backs> 2.5" of vertical adjustment on back pan> Mount inside back shell without interferingwith depth/angle adjustment>Available for left or right side>Available in 2 sizes:Standard: 7.5" L - 5" HPediatric: 5.5" L - 3" H>Designed especially for Invacare MatrxElite backs> Provides an additional 3" of vertical position(higher or lower) relative to mounting slots>Available for left or right side>Available in 1 size:Standard: 7.5" L - 5" HLATERAL PAD SIZESXS:3.25" x 4.25"S:3.5" x 5.25"M:3.75" x 5.75"L:4.25" x 6.5"16

POSITIONING OPTIONS:POWER HEADRESTPOWER SWING-AWAY CHIN AND/ORCENTER LINE MOUNTING SYSTEMPOWER SWING-AWAY JOYSTICK>Headrest can retract backward up to 4"and lower out of the way up to 3">Fits any standard Motion Concepts’ back>Can be controlled with separateswitch or as an additional switch on amulti-function system>Must be ordered through request forquotation (RFQ)>Call customer service for detailsMEMORY SEATING>Can be used for mounting of drive controlsand/or power positioning controls>Uses a switch boom, swings away to freeclient’s face from obstruction>Can be used on all standard MotionConcepts’ backs>May be mounted on left or right side>Allows client to adjust height of chin control in1.5" range before it swings away>Power Swing-Away feature allows Joystick to be repositioned for client comfort,transfers and/or environmental accessFLIP AND FOLD AWAY LAP TRAYATTENDANT SWITCH FORMEMORY SEATINGM99 & SENSOR MODULE17>One “command” can control the position of up to fourindependent actuators>Ability to program up to four different memory positions>Available in single or multiple power functionconfigurations>Seamless integration with drive controls from Invacare,Quantum Rehab and Quickie using MotionConcepts’ enhanced electronics>May also be controlled through separate switch or toggle>Able to control tilt, recline, and power front rigging,including independent elevating leg rests>Can either read the function position from the built-infeedback of the actuators or use simple 1" x 1" add-onsensors attached at each moveable axis on the chair>Flip and Fold Away Lap Tray is an angle adjustable lap traythat flips up and rotates back out of the way or removescompletely when not in use>Universal fit can be attached to any wheelchair armrest>Hardware also available to mount communication board orlaptop computers

POSITIONING OPTIONS:PUSH AND TRANSFER HANDLES POWER SWING-AWAY BACKPACK SAFETY LIGHT KITABCDEA- HEIGHT ADJUSTABLE TRANSFER HANDLES> Height adjustable from 3.5" - 6"> Mounted to seat frame> Foam rubber grips>Increments of 3.625" - 6.125"B- BENT ANGLED PUSH HANDLES> 5" rise, 5° out angle, mount to angledsection of Motion Concepts’ pushbarC - ANGLED PUSH HANDLES> 5" rise, 5° out angle, mounts to flatsection of Motion Concepts’ pushbarD - STRAIGHT PUSH HANDLES>5.5" from center of Motion Concepts’ pushbarE- STRAIGHT ANGLED PUSH HANDLES>5.5" offset and 5° angle from center ofMotion Concepts’ pushbar>Backpack swings around 270° from homeposition to side of chair in order toprovide users with access to stored items>Available in right and left versions>Operated through separate switch and motorcontrol box or wheelchair drive controls>Available on tilt only systems. Recline andTilt/Recline via request for quotation (RFQ)>50 lbs pack storage capacity>Front or Rear lights are available as a set of 2 with any UltraLow system>Provides extra visibility and illumination in dark or low light areas>Lightweight and visually pleasing>Uses low voltage LED lighting with power from base>Cool to the touch LED for client safetyMULTI-MOUNT HARDWARE KITPOWER SLIDING SEAT>Power sliding seat provides up to 6" of fore and aft movement for transfers and optimalbalancing of client weight>When system is in its most forward position the elevating and articulating calf panel remainstucked under the front of the seat for unrestricted transfer>The seat then slides back to the home position effectively balancing the system for clients witha disproportionate amount of weight forward>Multi-mount kit offers unlimited combinations for mounting push buttons andtoggle switches>Provides mounting solutions for Multi-position Flat arm pads, Ergonomic ArmTroughs, armrest tubes and multi rails>Standard with all Motion Concepts’ systems18

ELECTRONICS OPTIONS:All Motion Concepts’ electronics are designed to ensure the smooth and seamless operation of every power positioning system wemanufacture. From the UltraLow tilt to our most customized power positioning solution, each electronic component is designed withthe flexibility and modularity needed to provide years of safe and reliable service.MOTOR CONTROLLER STANDARD FEATURES INCLUDE:>A standard, accessible attendant switch to control the powerseating functions or the ability to add one> Soft start and soft stop provide a smooth, easy transition andeliminate quick, “jerky” tilts or hard stops at the beginningand end of any command>Drive lockout with SMARTS to eliminate mercury splash> Standard, independent, variable speed actuator control ofup to six controls>Designed to interface with all power base electronics platformsand specialty drive controls – including Q-Logic, MK6,RNet & DX2.MOTOR CONTROLLERS:SINGLE FUNCTION CONTROL BOXNEWSINGLE FUNCTION CONTROL BOXENHANCED CONTROL BOXESHELIX SIGMA MULTI FUNCTIONCONTROL BOXM130M33M27HELIX 1.0The single function control box controls oneseating function through a separate switch,toggle, or through the wheelchair drivecontrols.>Adjustable speed controlM130 SINGLE FUNCTIONThis new single function control box controls oneseating function through a separate switch, toggle,or through the wheelchair drive controls:>Less than half the size of the Helix 1.0, with thesame power output>Utilizes new Molex connector harness foractuator power>New, compact, integrated moulded limit switchcables for cleaner installation and mountingM27 ENHANCED SINGLE FUNCTIONM33 ENHANCED DUAL FUNCTIONSingle and dual function enhanced motor controlboxes provide the same function as our standardmotor control boxes with several additionalfunctional benefits. These control boxes aredesigned to operate power positioning functionsthrough a separate switch or toggle box, or canbe interfaced to allow operation of the powerpositioning system through the wheelchair drivecontrols. Enhanced motor control boxes offeradditional functions, such as:>Accessible attendant control toggle switchstandard on top of box>LED on top of box provides visual confirmationwhen chair is in home position, reduced driveor drive lockout (DLO)>Variable speed dials are accessible on outsideof box for independent control of actuatorspeeds without programmerHELIX SIGMAOur enhanced multiple function controlbox provides maximum modularity,programmability and function to meetvirtually any application. This control box isable to control from one to seven powerpositioning functions while also offering thefollowing features:>Standard tipsy angle sensor and reduceddrive speed>Ability to drive while elevated>LEDs on top of box provide visualconfirmation of drive lockout, reduceddrive and home functions>Variable speed control and attendantcontrol for up to six motors19

MECHANICAL SWITCH OPTIONS:S-19 SINGLE TOGGLE BOXSTEALTH EGG SWITCHM07 LAZARUS JUMP STARTERTOGGLE BOXESS-37DS-38S-26Allows control of one function in direct modeor two functions in auto reversing mode>Includes drive lockout (DLO) indicator>Female DB9 connectorM16 SPLITTER BOX>A large 3" x 1.5" egg shaped push button witha 52" long cable and a 0.125" mono phonoconnector>Available in green or black>Mono connector>Sleek, compact box accommodates up to fivemechanical switches>Converts five separate mechanical switch inputsinto one industry standard female 9 pinconnector>Useful when multiple mechanical switches arelocated in several different locations on chair>For use with 0.125" plugs>Battery charger booster>When the battery voltage levels drop too lowfor the automatic charger to start charging, theLazarus sends the required signal to begincharging>Durable push button start switch>Charging status indicated with green LED light>Must be used in conjunction with off-boardchargerS-37 & S-37D SINGLE (stereo connector)Allows control of one function in direct modeor two functions in auto reversing mode>Low voltage toggleS-38 DUAL (female DB9 connector)Allows control of one function in direct modeor two functions in auto reversing mode>Includes drive lockout (DLO) indicatorS-26 FOUR WAY (female DB9 connector)Allows control of two functions in direct modeor four functions in auto reversing mode>Includes drive lockout (DLO) indicatorFEATHER TOUCH SWITCHESPUSH BUTTON SWITCHESA B C D A B C D>Limited force capacitive touch switch>Available in single, dual and quad button configurationsA - S01 "QUARTER SIZE" SINGLE FUNCTION SWITCH (mono connector)B - S02 SMALL "DIME SIZE" SINGLE FUNCTION SWITCH (mono connector)C - S32T "DIME SIZE" DUAL FUNCTION SWITCHES (female DB9 connector)D - S34T "DIME SIZE" QUAD FUNCTION SWITCH (female DB9 connector)A- S31 SINGLE PUSH BUTTON SWITCH (mono connector)>Allows control of one seating function in auto reversing modeB - S32P DUAL PUSH BUTTON SWITCH (stereo connector)>Allows control of two functions in auto reversing mode or one function in direct modeC - S32D DUAL PUSH BUTTON SWITCH (female DB9 connector)>Allows control of two functions in auto reversing mode or one function in direct modeD - S34 Quad PUSH BUTTON SWITCH (female DB9 connector)>Allows control of two functions in direct mode or up to four functions in auto reversing mode22