Leviton Catalog - Womack Electric Supply Company

WIRE MESH SAFETY GRIP FEATURESIndustrial Grade Wire Mesh Safety GripsA LARGE SELECTION OF WIRE MESH PULLING, STRAIN-RELIEF AND SUPPORT GRIPSLeviton Wire Mesh Safety Grips are built tough to provide the strength, reliability andgripping force required for today’s demanding wire management applications. Theyare designed to distribute stress over a large area so they can securely hold, pull orsupport the wire, rope, tubing or fiber optic cable to which they are applied.Leviton Wire Mesh Safety Grip products offer a wide selection of style, weave, attachmentand wire options designed to meet the highest standards for strength, flexibility,durability and longevity.Leviton Wire Mesh Safety Grips are flexible holding devices used to pull cable, rope,or tubing into place; to support it after it has been installed, to prevent cable pullout;or to provide strain-relief that reduces the arc of bend at points of wire connections orterminations.1. Pulling GripsPulling Grips are reusable tools for pulling insulated conductors or bare wires, cable, nylon andwire rope, fiber optic cable etc. Both flexible eye and rotating eye attachments are available.2. Strain-Relief GripsStrain-Relief Grips are used to connect cable or flexible conduit to electrical enclosures andequipment.This prevents pullout and bending due to tension at the inner conductors at thepoint of termination.Wire Mesh Safety Grips3. Support GripsSupport Grips distribute the weight of the vertical or sloping runs of electrical and fiber opticcable, metal rods, tubing or hose over the entire length of the grip so that the cable is notsubject to damage. A variety of hangers and bales are available. These grips are also availablein stainless steel for additional corrosion-resistance. Consult factory for availabilty.Agency ApprovalsUL Listings and CSA Certifications are indicated on the appropriate product catalog pages. File numbers,are listed below.AGENCY CONTROL NUMBER FILE NUMBERUnderwriters Laboratories, Inc. 965U E-17394416G5 E-176347Canadian Standards Association — LR-702185StandardsLeviton Wire Mesh Safety Grips meet the following standards:NEC 300-19—Supporting cables in vertical raceways.NEC 351-2—Liquid-tight flexible metal conduit installations.NEC 400-7—Flexible cord installations.NEC 400-10—Strain-relief at joints and terminals.JIC H 13.11—Prevention of flexible hose failure.Q2To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com