Leviton Catalog - Womack Electric Supply Company

30, 40 and 60 AMP 600VIndustrial Grade AC Manual Motor and Welder Starting SwitchesBack and Side Wired AC Manual Motor Starting Switches 30 AMP 600V AC URDESCRIPTION MAX. HP IN NEMA IN NEMA SWITCHRATING 1 ENCL. 3R ENCL. ONLYDouble-pole, single-throw AC 2HP 120V AC N1302 N3302 MS302manual motor starting switch, 5HP 240V ACwithout overload protection. 10HP 480V ACColor: Black15HP 600V ACSame as above – Short Toggle — — MS302-SThree-pole, single-throw AC 3HP 120V AC N1303 N3303 MS303manual motor starting switch, 7.5HP 240V ACwithout overload protection. 15HP 480V ACColor: Black20HP 600V ACSame as above – Short Toggle — — MS303-SBack and Side Wired AC Manual Motor Starting Switches 40 AMP 600V AC URDESCRIPTION MAX HP RATING CAT. NO.Double-pole, single-throw AC manual 2HP 120V AC MS402motor starting switch, without overload5HP 240V ACprotection.10HP 480V ACColor: Black15HP 600V ACThree-pole, single-throw AC manual 3HP 120V AC MS403motor starting switch, without overload7.5HP 240V ACprotection.15HP 480V ACColor: Black20HP 600V ACBack or Front Wired AC Manual Motor Starting Switches 60 AMP 600V AC URDESCRIPTION MAX. HP IN NEMA SWITCHRATING 3R ENCL. ONLYDouble-pole, single-throw AC manual 10HP 240V AC N3602 MS602-BWmotor starting switch, without overload 15HP 480V ACprotection. Back Wired. Color: Black 20HP 600V ACSame as above except Front Wired — MS602-FWThree-pole, single-throw AC manual 10HP 240V AC N3603 MS603-BWmotor starting switch, without overload 25HP 480V ACprotection. Back Wired. Color: Black 30HP 600V ACSame as above except Front Wired — MS603-FWSide Wired AC Manual Welder Starting Switches 40 AMP 600V AC URDESCRIPTION MAX. HP RATING CAT. NO.Double-pole, single-throw AC manual 5HP 250V AC WS402welder starting switch. Color: Black5.60 (142.2)3.75 (95.3)3.28 (83.3)3.11 (78.7) 2.40(61.0)N13032.03 (51.6)0.90(22.9)MS302-S1.20 (35.0)2.97 (75.4)1.51(38.3)AC SwitchesEnclosures and WallplatesTYPE 1 STEEL TYPE 3R 302 STAINLESS STEEL LOCKOUT TYPE 1 ENCLOSURES TYPE 3R ENCLOSUREENCLOSURE ENCLOSURE WALLPLATE w/TAMPER-RESISTANT w/THERMOPLASTIC WITHOUT SWITCHWITHOUT SWITCH WITHOUT SWITCH SCREWS and SPANNER TOOL COVER and For 40 or 60AFor 30A MS Switches For 30A MS Switches w/30A 2-P (N1302-T) or MS Switches30A 3-P (N1303-T) Switch2 Knockouts 2 Bottom 2 Bottom1/2"and 3 /4" Knockouts KnockoutsTop #1 Allows: both allow:Bottom 1/2", 3 /4", 1/2", 3 /4",1", 1 1 /4" 1", 1 1 /4"#2 Allows:N13NC1/2", 3 /4"N33NC 84001-LOK (Lock purchased separately)N1303-T N13NC-T(w/30A Switch) (Cover Only)Note: For Type 3R Enclosure lockout, padlock with 5 /16" or equivalent shackle recommended (min. 1 /4" Dia.).For complete wallplate selection, see Section E.N36NC4.06 (103.2)3.28 (83.3)2.19 (55.6)1.14(29.0)WS402MS Switches• All molded parts are thermoplastic to resistimpacts, chemicals, temperature, tracking and arcing• Positive-contact design enhances fast-make/slow-break• Silver-alloy contacts for maximum conductivity andservice life• Back and side wire terminals accept up to #10 AWGsolid copper wire. For stranded #8 AWG wire, removeterminal clamp and use ring terminal• Oversized #10 triple-combination terminal screws arevibration resistant• Insulating barrier between terminals provide isolationfrom each phaseSPECIFICATIONS AND FEATURES• Nickel-plated brass mounting yoke for superiorcorrosion resistance• Large toggle provides positive actuation, even withgloved handWS Switches• Capable of accommodating bus bar termination inmulti-gang applications• Hole for mounting hardware supports panel mountingwith self-threading fasteners or pop rivets• Terminal screws accept up to # 10 AWG solid copperwire. For stranded # 8 AWG wire, remove terminalclamp and use ring terminal• Fast-threading, corrosion-resistant brass triplecombinationscrews for fast, easy installationTESTING AND CODE COMPLIANCE• MS devices: UL & CUL Listed (File #E-63969)• WS devices: UL Recognized Component(File #E-63969)• MS & WS devices comply with UL 508• Backed by a Limited Ten-Year WarrantyMATERIAL CHARACTERISTICSUL94 VO Flammability RatingOperating Temperature: -40°C to 65°CFor answers to technical questions, call Leviton’s Techline at 1-800-824-3005F7