FEIN Main Catalogue 2008/2009 - Howarth Timber

Metal core drillingModel KBM 32 Q KBM 50 QX KBM 52 U KBM 65 Q KBM 65 QFCompact core drillingunit with high mobilityfor installation jobs.Core drilling unit withtwo-speed gearbox forefficient drilling on site.Universal core drillingunit for flexible workingon site. Complete withreverse facility.Powerful core drillingunit with two-speedgearbox for theworkshop.Page 62 66 67 71 72Powerful core drillingunit with fine adjust –ment for the workshop.Metal coredrillingApplicationMetal core drilling Twist drills with drill chuck(DIN 338) Twist drills with MK fitting(DIN 345) Tapping * * * *Reaming Countersinking Working one-handedWorking overhead Installation work Workshop jobs Technical featuresCore drill max. Ø (mm) 32 50 50 65 65Core drill, drilling depth max.(mm)50 50 50 50 50Twist drill max. Ø (mm) 13 16 23 23 23Tapping M 12 M 16 M 16 M 20 M 20Reamer Ø (mm) 16 23 23 23Countersinking max. Ø (mm) 31 50 50 50Input (W) 700 1,200 1,200 1,460 1,460Speed, full load (R.P.M) 4401st gear (R.P.M) 130–2602nd gear (R.P.M) 260–5201st gear – slow (R.P.M) 160 125 2501st gear – fast (R.P.M) 260 250 1252nd gear – slow (R.P.M) 320 255 2552nd gear – fast (R.P.M) 520 510 510Core drill holder QuickIN QuickIN QuickIN QuickIN QuickINChuck MK 3 MK 3 MK 3Stroke (mm) 135 135 135 145 145Total stroke range (mm) 260 310 310 330 330Adjustment range (mm) ± 6Swivel zone ± 8°Magnetic holding power (N) 9,000 11,000 11,000 12,000 12,000Magnet Monitor System Weight (kg) 10.0 12.0 13.7 19.8 21.0EquipmentReversible rotationVariable speed controlMemory functionSpeed-controlled electronics(tacho) suitabilityoptimal suitabilityincluded* with tapping unit only61