FEIN Main Catalogue 2008/2009 - Howarth Timber

Application Material Technical features EquipmentRough sandingFine sandingDry sandingMicro-sandingpolishingMetal (stainless steel,copper and copperalloys, aluminium)Wood (natural andvarnished)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substanceInput (W)Speed, no load(R.P.M) 1,200 900-2,500 2.4 250 M 14 1,200 2,700-7,000 3.8 22 8-80 1,200 2,700-7,000 3.8 22 8-80 380 7,500 1.7 150 8.4 10,000 1.2 125 5.0 10,000 1.2 150 5.0 Weight(kg)Polishing disc Ø(mm)Sanding pad Ø(mm)Mounting threadCutting speed(m/sec)Pipes up to Ø(mm)Stroke (mm)HIGH-POWERMOTORSuctionSpindle lockSelf-start lockRestart lockSoft startApplication Material Technical features EquipmentRough sandingFine sandingMicro-sandingpolishingDry sandingMetal (stainless steel,copper and copperalloys, aluminium)Wood (natural andvarnished)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substance 1,200 500-1,500 2.4 250 M 14 1,200 200-1,500 2.4 250 M 14 Input (W)Speed, no load(R.P.M)Weight(kg)Polishing disc Ø(mm)Mounting threadHIGH-POWERMOTORSuctionSpindle lockSelf-start lockRestart lockSoft startApplication Material Technical features EquipmentRough sandingFine sandingMicro-sandingDry sandingMetal (stainless steel,copper and copperalloys, aluminium)Wood (natural andvarnished)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substanceInput (W)Air flow(l/min)Max. vacuum(mbar)Tank volume(l)Socket connectionmax. (W)Weight(kg)Automatic start /stopSuction control.Soft startSurfaceprocessing 1,300 3,300 230 24 2,000 7.0 1,500 3,600 270 40 2,000 9.0 Technical featuresInput (W)Oscillations(R.P.M)Weight(kg)Sanding plateabove corner(mm)250 11,000–21,000 1.4 80 QuickIN400 11,000–18,500 1.25ChuckApplicationRough sandingFine sandingMicro-sandingDry sandingWet sanding suitabilityoptimal suitability+ optionalincluded179