KM-400/700 - MRC

(Ⅰ) STRUCTURELidStainless steel containerMotorPower cord(Ⅱ) SPECIFICATIONSModel KM-700 KM-400Speed (rpm) 28,000 28,000Max. capacity (kg) 0.2 0.15Power110 / 220VMotor 1,000 W 700 WWeight (kg) 4.6 3.6Size (mm) φ162 x 298 φ134 x 2701

(Ⅲ) INSTRUCTION1. Use dry medical raw material for pulverization. The driest material used, the finerpowder is obtained.2. Regular medical raw material can be pulverized into powder within one minute. Forsome special raw materials that must be continuously pulverized for at least two minutesor longer, pause the operation for a moment after every two minutes of continuousoperation.3. Do not feed the pulverization chamber with raw material over one third of its capacityduring each pulverization process, so that sufficient space can be provided for crushingthe material into powder.4. If the motor is stopped after switching on due to filling of wet raw material, overloadingof raw material or sticking of blades, then turn off the power switch immediately toprotect the fuse and the motor from being burnt out.5. If the motor does not work properly, please firstly check the fuse, the power switch andthe plug socket.(Ⅳ) ATTENTION1. The machine must be placed on the horizontal & steady table.2. Keep the machine away from dust and moisture.3. If there is crowded during milling, then first cut off power and pull off plug, then cleanthe mill room.2