SS-R200, SS-CDR200 RS-232C documentation - Tascam

More documents

Recommendations

Info

RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・TOTAL TRACK No./TOTAL TIME RETURNTOTAL TRACK No./TOTAL TIME RETURN is sent in response to the TOTAL TRACK No./TOTAL TIME SENSEcommand [5D] to show the total number of tracks on a media and the total running time of the media in thecontrolled device.CommandDataRequest commandDD12 bytesTOTAL TRACK No./TOTAL TIME SENSE [5D]DescriptionData 1 Tens digit of the total number of tracksData 2 Ones digit of the total number of tracksData 3 Thousands digit of the total number of tracksData 4 Hundreds digit of the total number of tracksData 5 Tens digit of the minutesData 6 Ones digit of the minutesData 7 Thousands digit of the minutesData 8 Hundreds digit of the minutesData 9 Tens digit of the secondsData10 Ones digit of the secondsData11 Tens digit of the total number of frames of all tracksData12 Ones digit of the total number of frames of all tracksRemarks・PGM TOTAL TRACK No./TOTAL TIME RETURNPGM TOTAL TRACK No./TOTAL TIME RETURN is sent in response to the PGM TOTAL TRACK No./TOTALTIME SENSE command [5E] to show the total number and the total running time of the programmed tracks.CommandDEData12 bytesRequest command PGM TOTAL TRACK No./TOTAL TIME SENSE [5E]DescriptionRemarksData 1 Tens digit of the total number of tracksData 2 Ones digit of the total number of tracksData 3 Thousands digit of the total number of tracksData 4 Hundreds digit of the total number of tracksData 5 Tens digit of the minutesData 6 Ones digit of the minutesData 7 Thousands digit of the minutesData 8 Hundreds digit of the minutesData 9 Tens digit of the secondsData10 Ones digit of the secondsData11 Tens digit of the frameData12 Ones digit of the frame- 32 -
RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・KEYBOARD TYPE RETURNKEYBOARD TYPE RETURN is sent in response to the KEYBOARD TYPE SENSE command [5F] to show thecurrent keyboard type setting.CommandDFData2 bytesRequest command KEYBOARD TYPE SENSE [5F]Data 1 Data 2 Description Remarks0 0 Japanese0 1 US・ERROR SENSE REQUESTERROR SENSE REQUEST is sent from the controlled device to the external controller to show that thecontrolled device is in an error state. If the command is sent, the external controller issues the ERROR SENSEcommand [78]. Be sure to determine the error by using the ERROR SENSE command.CommandDataRequest commandF0NoneNone・CAUTION SENSE REQUESTCAUTION SENSE REQUEST is sent from the controlled device to the external controller to show that thecontrolled device is in a caution state. If the command is sent, the external controller issues the CAUTIONSENSE command [79]. Be sure to check the caution by using the CAUTION SENSE command.CommandDataRequest commandF1NoneNone・ILLEGAL STATUSILLEGAL STATUS is sent from the controlled device to the external controller to show that an invalid commandor data has been sent to the controlled device. If the command is sent, send a command or data again, makingsure that it is a valid command or data.CommandDataRequest commandF2NoneNone・POWER ON STATUSPOWER ON STATUS is sent from the controlled device to the external controller to show that the controlleddevice has been turned on.CommandDataRequest commandF4NoneNone- 33 -
Page 1: RS-232C Protocol Specifications Rev
Page 4 and 5: RS-232C Protocol Specifications Rev

SS-R200, SS-CDR200 RS-232C documentation - Tascam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?