SS-R200, SS-CDR200 RS-232C documentation - Tascam

More documents

Recommendations

Info

RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・INCR PLAY SELECT RETURNINCR PLAY SELECT RETURN is sent in response to the INCR PLAY SELECT command [3A] to show thecurrent incremental playback setting.CommandBAData2 bytesRequest command INCR PLAY SELECT [3A]Data 1 Data 2 Description Remarks0 0 INCR playback OFF0 1 INCR playback ON・KEY CONTROL SELECT RETURNKEY CONTROL SELECT RETURN is sent in response to the KEY CONTROL SELECT command [3D] to showthe current key control mode setting.CommandBDData2 bytesRequest command KEY CONTROL SELECT [3D]Data 1 Data 2 Description Remarks0 0 Key control OFF0 1 Key control ON・REMOTE/LOCAL SELECT RETURNREMOTE/LOCAL SELECT RETURN is sent in response to the REMOTE/LOCAL SELECT command [4C] toshow the current remote/local mode setting.CommandCCData2 bytesRequest command REMOTE/LOCAL SELECT [4C]Data 1 Data 2 Description Remarks0 0 Only remote Enables only remote operation through anRS-232C connection and with a wiredremote controller. Key operation on thecontrolled device is disabled0 1 Remote and Front key Enables remote operation and keyoperation on the controlled device- 28 -
RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・PLAY MODE RETURNPLAY MODE RETURN is sent in response to the PLAY MODE SENSE command [4E] to show the currentplayback mode setting.CommandCEData2 bytesRequest command PLAY MODE SENSE [4E]Data 1 Data 2 Description Remarks0 0 Continuous playback0 1 Single playback0 4 Programmed playback(data not available)0 5 Programmed playback(data available)0 6 Random playback・MECHA STATUS RETURNMECHA STATUS RETURN is sent in response to the MECHA STATUS SENSE command [50] to show thecurrent status of the specified mechanism of the controlled device.CommandD0Data2 bytesRequest command MECHA STATUS SENSE [50]Data 1 Data 2 Description Remarks0 0 No Media No Media0 1 Preparing for disc ejection In disc-ejecting state1 0 Stop In stop state1 1 Play In playback state1 2 Ready In ready state8 0 Monitor In input monitoring state8 1 Record In recording state8 2 Record ready In record ready state8 3 Information writing In information writing state・TRACK No. RETURNTRACK No. RETURN is sent in response to the TRACK No. SENSE command [55] to show the current tracknumber.CommandD5Data6 bytesRequest command TRACK No. SENSE [55]Data 1Data 2Data 3Data 4Data 5Data 6DescriptionEOM StatusTens digit of the track numberOnes digit of the track numberThousands digit of the track numberHundreds digit of the track numberRemarks00: Shows that the current track has yet toreach the set EOM time or EOM displaymode is turned off01: Shows that the controlled device isdisplaying the EOM time- 29 -
Page 1: RS-232C Protocol Specifications Rev
Page 4 and 5: RS-232C Protocol Specifications Rev

SS-R200, SS-CDR200 RS-232C documentation - Tascam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?