SS-R200, SS-CDR200 RS-232C documentation - Tascam

More documents

Recommendations

Info

RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・KEYBOARD TYPE SENSEKEYBOARD TYPE SENSE requests the controlled device to return the current keyboard type setting of thecontrolled device.CommandDataReturn5FNoneKEYBOARD TYPE RETURN [DF]・ERROR SENSEERROR SENSE requests the controlled device to return information about an error that occurred on thecontrolled device. Be sure to determine the error by using this command if the ERROR SENSE REQUESTcommand [F0] is issued from the controlled device.Command: 78Data:NoneReturn: ERROR SENSE RETURN [F8]・CAUTION SNESECAUTION SENSE requests the controlled device to return information about a caution that is shown on thecontrolled device. Be sure to check the caution by using this command if the CAUTION SENSE REQUESTcommand [F1] is issued from the controlled device.Command: 79Data:NoneReturn: CAUTION SENSE RETURN [F9]・VENDER COMMANDVENDER COMMAND is a command which controls a function available only for SS-CDR200/SS-R200.The function is identified with the value of Data1 and Data2.Command: 7FData:-- bytesReturn: VENDER COMMAND RETURN [FF]Data 1 Data 2 Function Remarks0 1 Device Select・DEVICE SELECTDEVICE SELECT changes the device to be used on the controlled device.Data:4 bytesData 3 Data 4 Function Remarks0 0 CF Sets the device to CF.0 1 CD Sets the device to CDIf the controlled device is SS-R200, it sends ILLEGAL [F2]0 2 USB Sets the device to USB0 3 SD Sets the device to SDF F Sense Requests the controlled device to return the current device.·If the controlled device receives data other than the above data, it sends ILLEGAL (F2).- 22 -
RS-232C Protocol Specifications Rev. 1.00SS-CDR200/SS-R200・INFORMATION RETURNINFORMATION RETURN is sent in response to the INFORMATION REQUEST command [0F] to show thesoftware version.Command8FData4 bytesRequest command INFORMATION REQUEST [0F]DescriptionRemarksData 1 Tens digit of the software versionData 2 Ones digit of the software versionData 3 First decimal place of the software versionExample) 0123: Version 01.23Data 4 Second decimal place of the software version・FLASH LOAD ACKNOWLEDGEFLASH LOAD ACKNOWLEDE is sent in response to the FLASH LOAD command [17] to show the data loadinghas been successful.Command: 97Data:NoneRequest command FLASH LOAD [17]・AUTO CUE LEVEL RETURNAUTO CUE LEVEL RETURN is sent in response to the AUTO CUE LEVEL PRESET command [20] to show thecurrent Auto cue level setting.CommandA0Data2 bytesRequest command AUTO CUE LEVEL PRESET [20]Data 1 Data 2 Description Remarks0 0 -24dB Auto cue level setting is -24 dB.0 1 -30dB Auto cue level setting is -30 dB.0 2 -36dB Auto cue level setting is -36 dB.0 3 -42dB Auto cue level setting is -42 dB.0 4 -48dB Auto cue level setting is -48 dB.0 5 -54dB Auto cue level setting is -54 dB.0 6 -60dB Auto cue level setting is -60 dB.0 7 -66dB Auto cue level setting is -66 dB.0 8 -72dB Auto cue level setting is -72 dB.- 23 -
Page 1: RS-232C Protocol Specifications Rev
Page 4 and 5: RS-232C Protocol Specifications Rev

SS-R200, SS-CDR200 RS-232C documentation - Tascam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?