download/print - Neighborhood Cats

• Assemble the trap(For a video demonstration of how to set up and disassemble the drop trap, go to theTNR Drop Trap page at www.livetrap.com.)1. First steps. Separate the main frame of the trap from the top (Figure 10-1).Unfold the main frame so it stands up and forms a square, and then unhook the weightflap, laying it flat (Figure 10-2). Remove the sliding door and temporarily put it aside(Figure 10-3).Figure 10-1 Figure 10-2Figure 10-32. Attach the top. Unfold the top then place it over the main frame of the drop trap(Figure 10-4). Attach all the spring clips to the top (Figure 10-5), except the two clipsright next to the frame of the sliding side door, one on either side. These two clips areused to attach a box trap or transfer cage during a transfer of a cat out of the drop trap(Figure 10-9). Except for these two, all other spring clips should be fastened so no gapscan form if a captured cat pushes up against the top.Figure 10-4 Figure 10-53. Re-insert the sliding door. Secure the roll hooks at the top of the sliding door tothe top of the drop trap, locking the door in place.99