001-104 Ducato MY GB - iinet

“Heat now” function fig. 87
To turn the heater on manually,
press timer button 8. The display and
warning light 1 will stay on while the
heater is in use.
Programming the heater
Before programming the heater, set
the clock.
fig. 87
62 GETTING TO KNOW YOUR VEHICLE
F0D0132m
Setting the clock
– Press button 4: display and warning
light 9-fig. 88 will light up.
– Within 10 seconds, press button 5
or 7 to select the correct time.
Keeping button 5 or 7 pressed will
fast forward or backward the clock.
Reading the clock fig. 88
To read the clock, press button 4:
current time will be displayed for approximately
10 seconds. Warning light
9 will come on.
fig. 88
F0D0134m
Programmed heating fig. 89
Heater ignition can be delayed from
1 minute to 24 hours. Three different
times can be programmed but only
one will be used.
To program starting time:
– press button 6: either symbol 10
or the previously programmed time
and number 3 (corresponding to the
preset function recalled) will light up
for 10 seconds;
fig. 89
F0D0136m